Suppressing power bus resonance and radiation using magnetic material and EBG structure

Yoshitaka Toyota, Kengo Iokibe, Ryuji Koga, Koichi Kondo, Shigeyoshi Yoshida

研究成果

4 被引用数 (Scopus)

抄録

We investigated the effects of noise suppression by interposing magnetic materials between the power and ground planes of a printed circuit board and focused on RF transmission through and radiation from the power bus. To reduce power bus resonance and radiation, we used a commercial noise suppression sheet, which is commonly used to suppress RF noise generated from electronic devices. We also examined a thin Ni-Zn ferrite film for practical use in the future. We found that power bus resonance and radiation could be mitigated owing to the imaginary part of complex permeability of magnetic materials. The thin ferrite film with a planar electromagnetic bandgap (EBG) structure helped suppress transmission and radiation in the EBG passband.

本文言語English
ホスト出版物のタイトル2008 Asia-Pacific Symposium on Electromagnetic Compatibility and 19th International Zurich Symposium on Electromagnetic Compatibility, APEMC 2008
ページ566-569
ページ数4
DOI
出版ステータスPublished - 9月 19 2008
イベント2008 Asia-Pacific Symposium on Electromagnetic Compatibility and 19th International Zurich Symposium on Electromagnetic Compatibility, APEMC 2008 - Suntec
継続期間: 5月 19 20085月 23 2008

出版物シリーズ

名前2008 Asia-Pacific Symposium on Electromagnetic Compatibility and 19th International Zurich Symposium on Electromagnetic Compatibility, APEMC 2008

Other

Other2008 Asia-Pacific Symposium on Electromagnetic Compatibility and 19th International Zurich Symposium on Electromagnetic Compatibility, APEMC 2008
国/地域Singapore
CitySuntec
Period5/19/085/23/08

ASJC Scopus subject areas

  • 電子工学および電気工学

フィンガープリント

「Suppressing power bus resonance and radiation using magnetic material and EBG structure」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル