Prediction of electromagnetic emissions from PCBs with interconnections through common-mode antenna model

Yoshitaka Toyota, Akifumi Sadatoshi, Tetsushi Watanabe, Kengo Iokibe, Ryuji Koga, Osami Wada

研究成果

7 被引用数 (Scopus)

抄録

A motherboard-daughterboard structure with a connector is known to have another source of common-mode radiated emissions, and the emissions depend on the connector's signal/ground pin configuration. In order to estimate the amount of radiated emissions from the structure, a commonmode antenna model is described. The model consists of an excitation source and an antenna element, and it calculates radiated emissions from PCBs not only quickly but accurately for practical use. In modeling the board interconnection via a connector, we added two common-mode excitation sources at each end of the connector. The electromagnetic emissions estimated by the model agreed with the measurements within an error of 6 dB around peak emission levels between 300 and 600 MHz.

本文言語English
ホスト出版物のタイトルProceedings of the 18th International Zurich Symposium on Electromagnetic Compatibility, EMC
ページ107-110
ページ数4
DOI
出版ステータスPublished - 12月 1 2007
イベント18th International Zurich Symposium on Electromagnetic Compatibility, EMC - Munich
継続期間: 9月 24 20079月 28 2007

出版物シリーズ

名前Proceedings of the 18th International Zurich Symposium on Electromagnetic Compatibility, EMC

Other

Other18th International Zurich Symposium on Electromagnetic Compatibility, EMC
国/地域Germany
CityMunich
Period9/24/079/28/07

ASJC Scopus subject areas

  • 電子工学および電気工学

フィンガープリント

「Prediction of electromagnetic emissions from PCBs with interconnections through common-mode antenna model」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル