Takeshi Uemori

2023

Tensile properties and slip deformation behavior of pure titanium thin wire with a small diameter-to-grain-size ratio

Sakamoto, J., Tada, N. & Uemori, T., 1月 26 2023, In: Materials Science and Engineering A. 863, 144532.

研究成果 › 査読

2021

Effect of resin lamination on tensile strength characteristics of SUS304 stainless steel thin film

Sakamoto, J., Tada, N. & Uemori, T., 9月 2021, In: International Journal of Advanced Manufacturing Technology. 116, 3-4, p. 1081-1088 8 p.

研究成果 › 査読

Prediction of the fracture location by tensile tests of gray cast iron based on the dimensional changes of graphite flakes

Tada, N., Uemori, T. & Sakamoto, J., 4月 1 2021, In: Journal of Pressure Vessel Technology, Transactions of the ASME. 143, 2, 1086169.

研究成果 › 査読

2 被引用数 (Scopus)

2020

Evaluation of strength of stainless steel bolt without heat treatment considering Bauschinger effect during manufacturing process

Narita, S., Hayakawa, K., Uemori, T. & Kubota, Y., 4月 2020, In: Journal of Materials Processing Technology. 278, 116481.

研究成果 › 査読

11 被引用数 (Scopus)

Finite element study of the effect of internal cracks on surface profile change due to low loading of turbine blade

Sakamoto, J., Tada, N., Uemori, T. & Kuniyasu, H., 7月 2020, In: Applied Sciences (Switzerland). 10, 14, 4883.

研究成果 › 査読

Open Access

2 被引用数 (Scopus)

2019

Effect of lubrication and forging load on surface roughness, residual stress, and deformation of cold forging tools

Karunathilaka, N., Tada, N., Uemori, T., Hanamitsu, R., Fujii, M., Omiya, Y. & Kawano, M., 7月 2019, In: Metals. 9, 7, 783.

研究成果 › 査読

Open Access

4 被引用数 (Scopus)

純チタン薄板における微視的な不均一変形が表面あれに及ぼす影響に関する結晶塑性有限要素解析

Uemori, T., Kakihara, H. & Tada, N., 2019, In: Zairyo/Journal of the Society of Materials Science, Japan. 68, 6, p. 478-484 7 p.

研究成果 › 査読

Open Access

2018

Microscopic elastic and plastic inhomogeneous deformations and height changes on the surface of a polycrystalline pure-titanium plate specimen under cyclic tension

Tada, N. & Uemori, T., 10月 13 2018, In: Applied Sciences (Switzerland). 8, 10, 1907.

研究成果 › 査読

3 被引用数 (Scopus)

2017

Elastic and Plastic Microscopic Undulation on the Surface of Polycrystalline Pure Titanium Under Tension

Tada, N., Uemori, T. & Nakata, T., 12月 1 2017, In: Journal of Pressure Vessel Technology, Transactions of the ASME. 139, 6, 061403.

研究成果 › 査読

4 被引用数 (Scopus)

Evaluation of thin copper wire and lead-free solder joint strength by pullout tests and wire surface observation

Tada, N., Tanaka, T., Uemori, T. & Nakata, T., 9月 2017, In: Crystals. 7, 8, 255.

研究成果 › 査読

5 被引用数 (Scopus)

Influence of Bauschinger effect and anisotropy on springback of aluminum alloy sheets

Uemori, T., Sumikawa, S., Naka, T., Ma, N. & Yoshida, F., 2017, In: Materials Transactions. 58, 6, p. 921-926 6 p.

研究成果 › 査読

2 被引用数 (Scopus)

2015

Evaluation of forming limit by principal shear strain energies

Yoshimura, H., Horita, H., Uemori, T., Naka, T. & Mihara, Y., 2015, In: Keikinzoku/Journal of Japan Institute of Light Metals. 65, 5, p. 190-195 6 p.

研究成果 › 査読

Open Access

1 被引用数 (Scopus)

Influence of Bauschinger effect and anisotropy on springback of aluminum alloy sheets

Uemori, T., Sumikawa, S., Naka, T., Ma, N. & Yoshida, F., 2015, In: Keikinzoku/Journal of Japan Institute of Light Metals. 65, 11, p. 582-587 6 p.

研究成果 › 査読

Open Access

Modeling of anisotropic hardening of sheet metals including description of the Bauschinger effect

Yoshida, F., Hamasaki, H. & Uemori, T., 12月 1 2015, In: International Journal of Plasticity. 75, p. 170-188 19 p.

研究成果 › 査読

82 被引用数 (Scopus)

Modeling of large-strain cyclic plasticity including description of anisotropy evolution for sheet metals

Yoshida, F., Uemori, T. & Hamasaki, H., 6月 6 2015, In: Advanced Structured Materials. 64, p. 571-585 15 p.

研究成果 › 査読

異種金属接着板の引張り曲げ・曲げ戻しおける接着層のせん断変形挙動（共著）

Uemori, T., 2015, In: 日本接着学会誌.

研究成果 › 査読

主せん断ひずみエネルギーによる成形限界の評価（共著）

Uemori, T., 2015, In: 軽金属. 65, 5, p. 190-195 6 p.

研究成果 › 査読

2014

Implicit Stress Integration and Consistent Tangent Matrix for Yoshida’s 6th Order Polynomial Yield Function Combined with Yoshida-Uemori Kinematic Hardening Rule（共著）

Uemori, T., 2014, In: Key Engineering Materials. 651-653, p. 558-563 6 p.

研究成果 › 査読

2013

Modeling of Bauschinger effect during stress reversal

Uemori, T., Sumikawa, S. & Yoshida, F., 12月 2013, In: Steel Research International. 84, 12, p. 1267-1272 6 p.

研究成果 › 査読

2 被引用数 (Scopus)

2012

Elasto-plasticity behavior of IF steel sheet with planar anisotropy and its macro-meso modeling

Kitayama, K., Kobayashi, T., Uemori, T. & Yoshida, F., 2012, In: isij international. 52, 4, p. 735-742 8 p.

研究成果 › 査読

6 被引用数 (Scopus)

2011

Elasto-plasticity behavior of if steel sheet with planar anisotropy and its macro-meso modeling

Kitayama, K., Kobayashi, T., Uemori, T. & Yoshida, F., 2011, In: Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan. 97, 4, p. 221-229 9 p.

研究成果 › 査読

4 被引用数 (Scopus)

Experimental observation of elasto-piasticity behavior of type 5000 and 6000 aluminum alloy sheets

Tamura, S., Sumikawa, S., Uemori, T., Hamasaki, H. & Yoshida, F., 5月 2011, In: Materials Transactions. 52, 5, p. 868-875 8 p.

研究成果 › 査読

20 被引用数 (Scopus)

Experimental observation of elasto-plasticity behavior of type 5000 and 6000 aluminum alloy sheets

Tamura, S., Sumikawa, S., Uemori, T., Hamasaki, H. & Yoshida, F., 2011, In: Keikinzoku/Journal of Japan Institute of Light Metals. 61, 6, p. 255-261 7 p.

研究成果 › 査読

2 被引用数 (Scopus)

2010

Elasto-plasticity behavior of high strength steel sheet in biaxial stress path change

Uemori, T., Kuramitsu, T., Mito, Y., Hino, R., Naka, T. & Yoshida, F., 10月 2010, In: Materials Transactions. 51, 10, p. 1814-1818 5 p.

研究成果 › 査読

6 被引用数 (Scopus)

2008

Effects of strain rate, temperature and sheet thickness on yield locus of AZ31 magnesium alloy sheet

Naka, T., Uemori, T., Hino, R., Kohzu, M., Higashi, K. & Yoshida, F., 5月 26 2008, In: Journal of Materials Processing Technology. 201, 1-3, p. 395-400 6 p.

研究成果 › 査読

61 被引用数 (Scopus)

FE simulation of non-uniform plastic deformation of steel sheet and elimination of yield point in temper rolling

Yoshida, F., Uemori, T., Kaneda, Y., Yamamoto, S., Goto, Y. & Sakai, G., 2008, In: Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan. 94, 10, p. 384-390 7 p.

研究成果 › 査読

2 被引用数 (Scopus)

FLD of AZ31 sheet under warm stretching and its prediction

Naka, T., Nakayama, Y., Uemori, T., Hino, R., Yoshida, F., Kohzu, M. & Higashi, K., 12月 30 2008, In: International Journal of Modern Physics B. 22, 31-32, p. 6010-6015 6 p.

研究成果 › 査読

6 被引用数 (Scopus)

Plastic deformation behavior of high strength steel sheet under non-proportional loading and its modeling

Uemori, T., Mito, Y., Sumikawa, S., Hino, R., Yoshida, F. & Naka, T., 12月 30 2008, In: International Journal of Modern Physics B. 22, 31-32, p. 5394-5399 6 p.

研究成果 › 査読

2 被引用数 (Scopus)

2007

Effects of strain rate and temperature on yield locus for AZ31 magnesium alloy sheet

Naka, T., Hayakashi, M., Nakayama, Y., Uemori, T., Kohzu, M., Higashi, K. & Yoshida, F., 2007, In: Key Engineering Materials. 340-341 I, p. 119-124 6 p.

研究成果 › 査読

Open Access

3 被引用数 (Scopus)

Modeling of large-strain cyclic plasticity for accurate springback simulation

Yoshida, F., Uemori, T. & Abe, S., 1月 1 2007, In: Key Engineering Materials. 340-341 II, p. 811-816 6 p.

研究成果 › 査読

7 被引用数 (Scopus)

Plastic deformation behavior of high strength steel sheet under non-proportional loading and its modeling

Uemori, T., Kuramitsu, T., Hino, R., Naka, T. & Yoshida, F., 2007, In: Key Engineering Materials. 340-341 II, p. 895-900 6 p.

研究成果 › 査読

1 被引用数 (Scopus)

2004

Effect of strain-rate and temperature on yield locus for 5083 aluminum alloy sheet

Naka, T., Nakayama, Y., Uemori, T., Hino, R. & Yoshida, F., 2004, In: Key Engineering Materials. 274-276, I, p. 937-942 6 p.

研究成果 › 査読

7 被引用数 (Scopus)

2003

A model of large-strain cyclic plasticity and its application to springback simulation

Yoshida, F. & Uemori, T., 10月 2003, In: International Journal of Mechanical Sciences. 45, 10, p. 1687-1702 16 p.

研究成果 › 査読

301 被引用数 (Scopus)

Effects of temperature on yield locus for 5083 aluminum alloy sheet

Naka, T., Nakayama, Y., Uemori, T., Hino, R. & Yoshida, F., 9月 22 2003, In: Journal of Materials Processing Technology. 140, 1-3 SPEC., p. 494-499 6 p.

研究成果 › 査読