Utility frequency AC connected high frequency AC one stage power processing conversion circuits with boosted DC voltage rail

H. Tanimatsu, Tarek Ahmed, Eiji Hiraki, I. Hirota, H. Omori, Nabil A. Ahmed, H. W. Lee, M. Nakaoka

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)

Abstract

This paper presents a single phase utility AC connected two-switch boost-half bridge one stage high frequency power conversion circuit topology with boosted DC link and active power filter function, which is more suitable for consumer IH appliances as cooking heater and super heated steamer. The proposed high frequency power converter Is composed of power conversion conditioning and processing combined by discontinuous current mode boost type power factor correction converter and half bridge ZVS-PWM high frequency single ended push pull load resonant inverter. This power converter include some advantages such as simple configuration and control scheme, low cost, utility AC side harmonic current reduction with unity power factor and constant frequency soft switching PWM for power regulation. Its operating principle is described and discussed herein. In addition to these, the operating performances of the proposed power converter using IGBTs are illustrated and estimated on the basis of simulation and experimental results. Its practical effectiveness as consumer induction heater mentioned above is actually proved from an experimental point of view. Moreover, to extend soft switching operation ranges of this power converter for low power setting, switching frequency selection approach based on switching frequency selected asymmetrical PWM is discussed in this paper.

Original languageEnglish
Title of host publicationICEMS 2005: Proceedings of the Eighth International Conference on Electrical Machines and Systems
Pages1101-1106
Number of pages6
Volume2
Publication statusPublished - 2005
Externally publishedYes
EventICEMS 2005: 8th International Conference on Electrical Machines and Systems - Nanjing, China
Duration: Sep 27 2005Sep 29 2005

Other

OtherICEMS 2005: 8th International Conference on Electrical Machines and Systems
CountryChina
CityNanjing
Period9/27/059/29/05

Fingerprint

Power converters
Rails
Pulse width modulation
Networks (circuits)
Electric potential
Switching frequency
Processing
Zero voltage switching
Electric network topology
Insulated gate bipolar transistors (IGBT)
Cooking
Switches
Costs

ASJC Scopus subject areas

  • Engineering(all)

Cite this

Tanimatsu, H., Ahmed, T., Hiraki, E., Hirota, I., Omori, H., Ahmed, N. A., ... Nakaoka, M. (2005). Utility frequency AC connected high frequency AC one stage power processing conversion circuits with boosted DC voltage rail. In ICEMS 2005: Proceedings of the Eighth International Conference on Electrical Machines and Systems (Vol. 2, pp. 1101-1106). [1574950]

Utility frequency AC connected high frequency AC one stage power processing conversion circuits with boosted DC voltage rail. / Tanimatsu, H.; Ahmed, Tarek; Hiraki, Eiji; Hirota, I.; Omori, H.; Ahmed, Nabil A.; Lee, H. W.; Nakaoka, M.

ICEMS 2005: Proceedings of the Eighth International Conference on Electrical Machines and Systems. Vol. 2 2005. p. 1101-1106 1574950.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Tanimatsu, H, Ahmed, T, Hiraki, E, Hirota, I, Omori, H, Ahmed, NA, Lee, HW & Nakaoka, M 2005, Utility frequency AC connected high frequency AC one stage power processing conversion circuits with boosted DC voltage rail. in ICEMS 2005: Proceedings of the Eighth International Conference on Electrical Machines and Systems. vol. 2, 1574950, pp. 1101-1106, ICEMS 2005: 8th International Conference on Electrical Machines and Systems, Nanjing, China, 9/27/05.
Tanimatsu H, Ahmed T, Hiraki E, Hirota I, Omori H, Ahmed NA et al. Utility frequency AC connected high frequency AC one stage power processing conversion circuits with boosted DC voltage rail. In ICEMS 2005: Proceedings of the Eighth International Conference on Electrical Machines and Systems. Vol. 2. 2005. p. 1101-1106. 1574950
Tanimatsu, H. ; Ahmed, Tarek ; Hiraki, Eiji ; Hirota, I. ; Omori, H. ; Ahmed, Nabil A. ; Lee, H. W. ; Nakaoka, M. / Utility frequency AC connected high frequency AC one stage power processing conversion circuits with boosted DC voltage rail. ICEMS 2005: Proceedings of the Eighth International Conference on Electrical Machines and Systems. Vol. 2 2005. pp. 1101-1106
@inproceedings{7e6b661af4694d6ab0f2cc570c2648e8,
title = "Utility frequency AC connected high frequency AC one stage power processing conversion circuits with boosted DC voltage rail",
abstract = "This paper presents a single phase utility AC connected two-switch boost-half bridge one stage high frequency power conversion circuit topology with boosted DC link and active power filter function, which is more suitable for consumer IH appliances as cooking heater and super heated steamer. The proposed high frequency power converter Is composed of power conversion conditioning and processing combined by discontinuous current mode boost type power factor correction converter and half bridge ZVS-PWM high frequency single ended push pull load resonant inverter. This power converter include some advantages such as simple configuration and control scheme, low cost, utility AC side harmonic current reduction with unity power factor and constant frequency soft switching PWM for power regulation. Its operating principle is described and discussed herein. In addition to these, the operating performances of the proposed power converter using IGBTs are illustrated and estimated on the basis of simulation and experimental results. Its practical effectiveness as consumer induction heater mentioned above is actually proved from an experimental point of view. Moreover, to extend soft switching operation ranges of this power converter for low power setting, switching frequency selection approach based on switching frequency selected asymmetrical PWM is discussed in this paper.",
author = "H. Tanimatsu and Tarek Ahmed and Eiji Hiraki and I. Hirota and H. Omori and Ahmed, {Nabil A.} and Lee, {H. W.} and M. Nakaoka",
year = "2005",
language = "English",
isbn = "7506274078",
volume = "2",
pages = "1101--1106",
booktitle = "ICEMS 2005: Proceedings of the Eighth International Conference on Electrical Machines and Systems",

}

TY - GEN

T1 - Utility frequency AC connected high frequency AC one stage power processing conversion circuits with boosted DC voltage rail

AU - Tanimatsu, H.

AU - Ahmed, Tarek

AU - Hiraki, Eiji

AU - Hirota, I.

AU - Omori, H.

AU - Ahmed, Nabil A.

AU - Lee, H. W.

AU - Nakaoka, M.

PY - 2005

Y1 - 2005

N2 - This paper presents a single phase utility AC connected two-switch boost-half bridge one stage high frequency power conversion circuit topology with boosted DC link and active power filter function, which is more suitable for consumer IH appliances as cooking heater and super heated steamer. The proposed high frequency power converter Is composed of power conversion conditioning and processing combined by discontinuous current mode boost type power factor correction converter and half bridge ZVS-PWM high frequency single ended push pull load resonant inverter. This power converter include some advantages such as simple configuration and control scheme, low cost, utility AC side harmonic current reduction with unity power factor and constant frequency soft switching PWM for power regulation. Its operating principle is described and discussed herein. In addition to these, the operating performances of the proposed power converter using IGBTs are illustrated and estimated on the basis of simulation and experimental results. Its practical effectiveness as consumer induction heater mentioned above is actually proved from an experimental point of view. Moreover, to extend soft switching operation ranges of this power converter for low power setting, switching frequency selection approach based on switching frequency selected asymmetrical PWM is discussed in this paper.

AB - This paper presents a single phase utility AC connected two-switch boost-half bridge one stage high frequency power conversion circuit topology with boosted DC link and active power filter function, which is more suitable for consumer IH appliances as cooking heater and super heated steamer. The proposed high frequency power converter Is composed of power conversion conditioning and processing combined by discontinuous current mode boost type power factor correction converter and half bridge ZVS-PWM high frequency single ended push pull load resonant inverter. This power converter include some advantages such as simple configuration and control scheme, low cost, utility AC side harmonic current reduction with unity power factor and constant frequency soft switching PWM for power regulation. Its operating principle is described and discussed herein. In addition to these, the operating performances of the proposed power converter using IGBTs are illustrated and estimated on the basis of simulation and experimental results. Its practical effectiveness as consumer induction heater mentioned above is actually proved from an experimental point of view. Moreover, to extend soft switching operation ranges of this power converter for low power setting, switching frequency selection approach based on switching frequency selected asymmetrical PWM is discussed in this paper.

UR - http://www.scopus.com/inward/record.url?scp=33846956145&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=33846956145&partnerID=8YFLogxK

M3 - Conference contribution

SN - 7506274078

SN - 9787506274074

VL - 2

SP - 1101

EP - 1106

BT - ICEMS 2005: Proceedings of the Eighth International Conference on Electrical Machines and Systems

ER -