The Canadian space agency planetary analogue materials suite

Edward A. Cloutis, Paul Mann, Matthew Richar Izawa, Daniel M. Applin, Claire Samson, Roman Kruzelecky, Timothy D. Glotch, Stanley A. Mertzman, Karen R. Mertzman, Timothy W. Haltigin, Christopher Fry

Research output: Contribution to journalArticle

9 Citations (Scopus)

Abstract

The Canadian Space Agency (CSA) recently commissioned the development of a suite of over fifty well-characterized planetary analogue materials. These materials are terrestrial rocks and minerals that are similar to those known or suspected to occur on the lunar or martian surfaces. These include: Mars analogue sedimentary, hydrothermal, igneous and low-temperature alteration rock suites; lunar analogue basaltic and anorthositic rock suites; and a generic impactite rock suite from a variety of terrestrial impact structures. Representative thin sections of the materials have been characterized by optical microscopy and electron probe microanalysis (EPMA). Reflectance spectra have been collected in the ultraviolet, visible, near-infrared and mid-infrared, covering 0.2-25. μm. Thermal infrared emission spectra were collected from 5 to 50. μm. Raman spectra with 532. nm excitation, and laser-induced fluorescence spectra with 405. nm excitation were also measured. Bulk chemical analysis was carried out using X-ray fluorescence, with Fe valence determined by wet chemistry. Chemical and mineralogical data were collected using a field-portable Terra XRD-XRF instrument similar to CheMin on the MSL Curiosity rover. Laser-induced breakdown spectroscopy (LIBS) data similar to those measured by ChemCam on MSL were collected for powdered samples, cut slab surfaces, and as depth profiles into weathered surfaces where present. Three-dimensional laser camera images of rock textures were collected for selected samples.The CSA intends to make available sample powders (<45. μm and 45-1000. μm grain sizes), thin sections, and bulk rock samples, and all analytical data collected in the initial characterisation study to the broader planetary science community.Aiming to complement existing planetary analogue rock and mineral libraries, the CSA suite represents a new resource for planetary scientists and engineers. We envision many potential applications for these materials in the definition, development and testing of new analytical instruments for use in planetary missions, as well as possible calibration and ground-truthing of remote sensing data sets. These materials may also be useful as reference materials for cross-calibration between different instruments and laboratories. Comparison of the analytical data for selected samples is useful for highlighting the relative strengths, weaknesses and synergies of different analytical techniques.

Original languageEnglish
JournalPlanetary and Space Science
DOIs
Publication statusAccepted/In press - Sep 8 2014
Externally publishedYes

Fingerprint

rocks
analogs
rock
X-ray fluorescence
thin section
impactite
laser
minerals
calibration
laser induced fluorescence
lunar surface
impact structure
laser-induced breakdown spectroscopy
electron probes
mineral
material
chemical analysis
microanalysis
electron probe analysis
complement

Keywords

  • Analogue materials
  • Field-portable instruments
  • Impacts
  • Mars
  • Moon
  • Spectroscopy
  • Surface
  • Surface

ASJC Scopus subject areas

  • Space and Planetary Science
  • Astronomy and Astrophysics

Cite this

Cloutis, E. A., Mann, P., Richar Izawa, M., Applin, D. M., Samson, C., Kruzelecky, R., ... Fry, C. (Accepted/In press). The Canadian space agency planetary analogue materials suite. Planetary and Space Science. https://doi.org/10.1016/j.pss.2015.09.001

The Canadian space agency planetary analogue materials suite. / Cloutis, Edward A.; Mann, Paul; Richar Izawa, Matthew; Applin, Daniel M.; Samson, Claire; Kruzelecky, Roman; Glotch, Timothy D.; Mertzman, Stanley A.; Mertzman, Karen R.; Haltigin, Timothy W.; Fry, Christopher.

In: Planetary and Space Science, 08.09.2014.

Research output: Contribution to journalArticle

Cloutis, EA, Mann, P, Richar Izawa, M, Applin, DM, Samson, C, Kruzelecky, R, Glotch, TD, Mertzman, SA, Mertzman, KR, Haltigin, TW & Fry, C 2014, 'The Canadian space agency planetary analogue materials suite', Planetary and Space Science. https://doi.org/10.1016/j.pss.2015.09.001
Cloutis, Edward A. ; Mann, Paul ; Richar Izawa, Matthew ; Applin, Daniel M. ; Samson, Claire ; Kruzelecky, Roman ; Glotch, Timothy D. ; Mertzman, Stanley A. ; Mertzman, Karen R. ; Haltigin, Timothy W. ; Fry, Christopher. / The Canadian space agency planetary analogue materials suite. In: Planetary and Space Science. 2014.
@article{a19c15ecf7b2463187f287745701dcad,
title = "The Canadian space agency planetary analogue materials suite",
abstract = "The Canadian Space Agency (CSA) recently commissioned the development of a suite of over fifty well-characterized planetary analogue materials. These materials are terrestrial rocks and minerals that are similar to those known or suspected to occur on the lunar or martian surfaces. These include: Mars analogue sedimentary, hydrothermal, igneous and low-temperature alteration rock suites; lunar analogue basaltic and anorthositic rock suites; and a generic impactite rock suite from a variety of terrestrial impact structures. Representative thin sections of the materials have been characterized by optical microscopy and electron probe microanalysis (EPMA). Reflectance spectra have been collected in the ultraviolet, visible, near-infrared and mid-infrared, covering 0.2-25. μm. Thermal infrared emission spectra were collected from 5 to 50. μm. Raman spectra with 532. nm excitation, and laser-induced fluorescence spectra with 405. nm excitation were also measured. Bulk chemical analysis was carried out using X-ray fluorescence, with Fe valence determined by wet chemistry. Chemical and mineralogical data were collected using a field-portable Terra XRD-XRF instrument similar to CheMin on the MSL Curiosity rover. Laser-induced breakdown spectroscopy (LIBS) data similar to those measured by ChemCam on MSL were collected for powdered samples, cut slab surfaces, and as depth profiles into weathered surfaces where present. Three-dimensional laser camera images of rock textures were collected for selected samples.The CSA intends to make available sample powders (<45. μm and 45-1000. μm grain sizes), thin sections, and bulk rock samples, and all analytical data collected in the initial characterisation study to the broader planetary science community.Aiming to complement existing planetary analogue rock and mineral libraries, the CSA suite represents a new resource for planetary scientists and engineers. We envision many potential applications for these materials in the definition, development and testing of new analytical instruments for use in planetary missions, as well as possible calibration and ground-truthing of remote sensing data sets. These materials may also be useful as reference materials for cross-calibration between different instruments and laboratories. Comparison of the analytical data for selected samples is useful for highlighting the relative strengths, weaknesses and synergies of different analytical techniques.",
keywords = "Analogue materials, Field-portable instruments, Impacts, Mars, Moon, Spectroscopy, Surface, Surface",
author = "Cloutis, {Edward A.} and Paul Mann and {Richar Izawa}, Matthew and Applin, {Daniel M.} and Claire Samson and Roman Kruzelecky and Glotch, {Timothy D.} and Mertzman, {Stanley A.} and Mertzman, {Karen R.} and Haltigin, {Timothy W.} and Christopher Fry",
year = "2014",
month = "9",
day = "8",
doi = "10.1016/j.pss.2015.09.001",
language = "English",
journal = "Planetary and Space Science",
issn = "0032-0633",
publisher = "Elsevier Limited",

}

TY - JOUR

T1 - The Canadian space agency planetary analogue materials suite

AU - Cloutis, Edward A.

AU - Mann, Paul

AU - Richar Izawa, Matthew

AU - Applin, Daniel M.

AU - Samson, Claire

AU - Kruzelecky, Roman

AU - Glotch, Timothy D.

AU - Mertzman, Stanley A.

AU - Mertzman, Karen R.

AU - Haltigin, Timothy W.

AU - Fry, Christopher

PY - 2014/9/8

Y1 - 2014/9/8

N2 - The Canadian Space Agency (CSA) recently commissioned the development of a suite of over fifty well-characterized planetary analogue materials. These materials are terrestrial rocks and minerals that are similar to those known or suspected to occur on the lunar or martian surfaces. These include: Mars analogue sedimentary, hydrothermal, igneous and low-temperature alteration rock suites; lunar analogue basaltic and anorthositic rock suites; and a generic impactite rock suite from a variety of terrestrial impact structures. Representative thin sections of the materials have been characterized by optical microscopy and electron probe microanalysis (EPMA). Reflectance spectra have been collected in the ultraviolet, visible, near-infrared and mid-infrared, covering 0.2-25. μm. Thermal infrared emission spectra were collected from 5 to 50. μm. Raman spectra with 532. nm excitation, and laser-induced fluorescence spectra with 405. nm excitation were also measured. Bulk chemical analysis was carried out using X-ray fluorescence, with Fe valence determined by wet chemistry. Chemical and mineralogical data were collected using a field-portable Terra XRD-XRF instrument similar to CheMin on the MSL Curiosity rover. Laser-induced breakdown spectroscopy (LIBS) data similar to those measured by ChemCam on MSL were collected for powdered samples, cut slab surfaces, and as depth profiles into weathered surfaces where present. Three-dimensional laser camera images of rock textures were collected for selected samples.The CSA intends to make available sample powders (<45. μm and 45-1000. μm grain sizes), thin sections, and bulk rock samples, and all analytical data collected in the initial characterisation study to the broader planetary science community.Aiming to complement existing planetary analogue rock and mineral libraries, the CSA suite represents a new resource for planetary scientists and engineers. We envision many potential applications for these materials in the definition, development and testing of new analytical instruments for use in planetary missions, as well as possible calibration and ground-truthing of remote sensing data sets. These materials may also be useful as reference materials for cross-calibration between different instruments and laboratories. Comparison of the analytical data for selected samples is useful for highlighting the relative strengths, weaknesses and synergies of different analytical techniques.

AB - The Canadian Space Agency (CSA) recently commissioned the development of a suite of over fifty well-characterized planetary analogue materials. These materials are terrestrial rocks and minerals that are similar to those known or suspected to occur on the lunar or martian surfaces. These include: Mars analogue sedimentary, hydrothermal, igneous and low-temperature alteration rock suites; lunar analogue basaltic and anorthositic rock suites; and a generic impactite rock suite from a variety of terrestrial impact structures. Representative thin sections of the materials have been characterized by optical microscopy and electron probe microanalysis (EPMA). Reflectance spectra have been collected in the ultraviolet, visible, near-infrared and mid-infrared, covering 0.2-25. μm. Thermal infrared emission spectra were collected from 5 to 50. μm. Raman spectra with 532. nm excitation, and laser-induced fluorescence spectra with 405. nm excitation were also measured. Bulk chemical analysis was carried out using X-ray fluorescence, with Fe valence determined by wet chemistry. Chemical and mineralogical data were collected using a field-portable Terra XRD-XRF instrument similar to CheMin on the MSL Curiosity rover. Laser-induced breakdown spectroscopy (LIBS) data similar to those measured by ChemCam on MSL were collected for powdered samples, cut slab surfaces, and as depth profiles into weathered surfaces where present. Three-dimensional laser camera images of rock textures were collected for selected samples.The CSA intends to make available sample powders (<45. μm and 45-1000. μm grain sizes), thin sections, and bulk rock samples, and all analytical data collected in the initial characterisation study to the broader planetary science community.Aiming to complement existing planetary analogue rock and mineral libraries, the CSA suite represents a new resource for planetary scientists and engineers. We envision many potential applications for these materials in the definition, development and testing of new analytical instruments for use in planetary missions, as well as possible calibration and ground-truthing of remote sensing data sets. These materials may also be useful as reference materials for cross-calibration between different instruments and laboratories. Comparison of the analytical data for selected samples is useful for highlighting the relative strengths, weaknesses and synergies of different analytical techniques.

KW - Analogue materials

KW - Field-portable instruments

KW - Impacts

KW - Mars

KW - Moon

KW - Spectroscopy

KW - Surface

KW - Surface

UR - http://www.scopus.com/inward/record.url?scp=84944097420&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84944097420&partnerID=8YFLogxK

U2 - 10.1016/j.pss.2015.09.001

DO - 10.1016/j.pss.2015.09.001

M3 - Article

JO - Planetary and Space Science

JF - Planetary and Space Science

SN - 0032-0633

ER -