Study on high efferent micro-deburring by large- Area EB irradiation

Togo Shinonaga, Yasuaki Kimura, Akira Okada, Tomoaki Miyoshi

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Abstract

A large- Area Electron Beam (EB) irradiation method has been developed recently. High energy EB with uniform energy distribution can be obtained without focusing the beam and they can lead to instant melting or evaporating of metal surface. Previous works clarified that surface finishing and modification were possible for various materials, such as metal molds and biomaterials. On the other hand, it was also confirmed that convex corner tips on the workpiece was rounded due to preferential material removal at the tip by large- Area EB irradiation. By using this phenomenon, we also reported that the micro burrs on SKD11 which were generated with EDM, were completely removed. In this study, micro-deburring on magnetic and non-magnetic materials is investigated. High efficient micro-deburring is also tried by using magnetic block and thermal insulation plate. SKD11, Ni, Cu, Ti-6Al-4V and Al are used as magnetic and non-magnetic materials. Micro burrs whose height are about 40 μm, are generated at the edge of many holes machined by EDM drilling. Pulse duration Dp and pulse frequency fp of large- Area EB are fixed at 2 μs and 0.125Hz, respectively. The energy density Ed and number of irradiation N are varied in order to investigate the effects of Ed and N on deburring characteristics. Burrs are completely removed on magnetic workpieces of SKD11 and Ni at Ed=15 J/cm2 over N=30 shots, while complete removal of burrs is difficult for non-magnetic workpieces of Cu, Ti-6Al-4V and Al. When the magnetic block is placed under the Cu, complete removal of burrs on Cu is successfully done due to concentrating of EB. Moreover, removal ratio of burrs on Cu is increased by inserting the thermal insulation plate between Cu and magnetic block. These results suggest that high efficient micro-deburring can be done on any materials by using the magnetic block and insulation plate.

Original languageEnglish
Title of host publicationProceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016
Publishereuspen
ISBN (Electronic)9780956679086
Publication statusPublished - 2016
Event16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016 - Nottingham, United Kingdom
Duration: May 30 2016Jun 3 2016

Other

Other16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016
CountryUnited Kingdom
CityNottingham
Period5/30/166/3/16

Fingerprint

Deburring
Electron beams
Irradiation
electron beams
irradiation
thermal insulation
Thermal insulation
magnetic materials
insulation
Metals
surface finishing
concentrating
Molds
Biocompatible Materials
drilling
Biomaterials
machining
high energy electrons
shot
metal surfaces

Keywords

  • Deburring
  • Large- Area EB irradiation
  • Magnetic materials
  • Micro burr
  • Non-magnetic materials

ASJC Scopus subject areas

  • Materials Science(all)
  • Environmental Engineering
  • Mechanical Engineering
  • Industrial and Manufacturing Engineering
  • Instrumentation

Cite this

Shinonaga, T., Kimura, Y., Okada, A., & Miyoshi, T. (2016). Study on high efferent micro-deburring by large- Area EB irradiation. In Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016 euspen.

Study on high efferent micro-deburring by large- Area EB irradiation. / Shinonaga, Togo; Kimura, Yasuaki; Okada, Akira; Miyoshi, Tomoaki.

Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016. euspen, 2016.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Shinonaga, T, Kimura, Y, Okada, A & Miyoshi, T 2016, Study on high efferent micro-deburring by large- Area EB irradiation. in Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016. euspen, 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016, Nottingham, United Kingdom, 5/30/16.
Shinonaga T, Kimura Y, Okada A, Miyoshi T. Study on high efferent micro-deburring by large- Area EB irradiation. In Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016. euspen. 2016
Shinonaga, Togo ; Kimura, Yasuaki ; Okada, Akira ; Miyoshi, Tomoaki. / Study on high efferent micro-deburring by large- Area EB irradiation. Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016. euspen, 2016.
@inproceedings{4480b6df91b542869b2bda64976deb59,
title = "Study on high efferent micro-deburring by large- Area EB irradiation",
abstract = "A large- Area Electron Beam (EB) irradiation method has been developed recently. High energy EB with uniform energy distribution can be obtained without focusing the beam and they can lead to instant melting or evaporating of metal surface. Previous works clarified that surface finishing and modification were possible for various materials, such as metal molds and biomaterials. On the other hand, it was also confirmed that convex corner tips on the workpiece was rounded due to preferential material removal at the tip by large- Area EB irradiation. By using this phenomenon, we also reported that the micro burrs on SKD11 which were generated with EDM, were completely removed. In this study, micro-deburring on magnetic and non-magnetic materials is investigated. High efficient micro-deburring is also tried by using magnetic block and thermal insulation plate. SKD11, Ni, Cu, Ti-6Al-4V and Al are used as magnetic and non-magnetic materials. Micro burrs whose height are about 40 μm, are generated at the edge of many holes machined by EDM drilling. Pulse duration Dp and pulse frequency fp of large- Area EB are fixed at 2 μs and 0.125Hz, respectively. The energy density Ed and number of irradiation N are varied in order to investigate the effects of Ed and N on deburring characteristics. Burrs are completely removed on magnetic workpieces of SKD11 and Ni at Ed=15 J/cm2 over N=30 shots, while complete removal of burrs is difficult for non-magnetic workpieces of Cu, Ti-6Al-4V and Al. When the magnetic block is placed under the Cu, complete removal of burrs on Cu is successfully done due to concentrating of EB. Moreover, removal ratio of burrs on Cu is increased by inserting the thermal insulation plate between Cu and magnetic block. These results suggest that high efficient micro-deburring can be done on any materials by using the magnetic block and insulation plate.",
keywords = "Deburring, Large- Area EB irradiation, Magnetic materials, Micro burr, Non-magnetic materials",
author = "Togo Shinonaga and Yasuaki Kimura and Akira Okada and Tomoaki Miyoshi",
year = "2016",
language = "English",
booktitle = "Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016",
publisher = "euspen",

}

TY - GEN

T1 - Study on high efferent micro-deburring by large- Area EB irradiation

AU - Shinonaga, Togo

AU - Kimura, Yasuaki

AU - Okada, Akira

AU - Miyoshi, Tomoaki

PY - 2016

Y1 - 2016

N2 - A large- Area Electron Beam (EB) irradiation method has been developed recently. High energy EB with uniform energy distribution can be obtained without focusing the beam and they can lead to instant melting or evaporating of metal surface. Previous works clarified that surface finishing and modification were possible for various materials, such as metal molds and biomaterials. On the other hand, it was also confirmed that convex corner tips on the workpiece was rounded due to preferential material removal at the tip by large- Area EB irradiation. By using this phenomenon, we also reported that the micro burrs on SKD11 which were generated with EDM, were completely removed. In this study, micro-deburring on magnetic and non-magnetic materials is investigated. High efficient micro-deburring is also tried by using magnetic block and thermal insulation plate. SKD11, Ni, Cu, Ti-6Al-4V and Al are used as magnetic and non-magnetic materials. Micro burrs whose height are about 40 μm, are generated at the edge of many holes machined by EDM drilling. Pulse duration Dp and pulse frequency fp of large- Area EB are fixed at 2 μs and 0.125Hz, respectively. The energy density Ed and number of irradiation N are varied in order to investigate the effects of Ed and N on deburring characteristics. Burrs are completely removed on magnetic workpieces of SKD11 and Ni at Ed=15 J/cm2 over N=30 shots, while complete removal of burrs is difficult for non-magnetic workpieces of Cu, Ti-6Al-4V and Al. When the magnetic block is placed under the Cu, complete removal of burrs on Cu is successfully done due to concentrating of EB. Moreover, removal ratio of burrs on Cu is increased by inserting the thermal insulation plate between Cu and magnetic block. These results suggest that high efficient micro-deburring can be done on any materials by using the magnetic block and insulation plate.

AB - A large- Area Electron Beam (EB) irradiation method has been developed recently. High energy EB with uniform energy distribution can be obtained without focusing the beam and they can lead to instant melting or evaporating of metal surface. Previous works clarified that surface finishing and modification were possible for various materials, such as metal molds and biomaterials. On the other hand, it was also confirmed that convex corner tips on the workpiece was rounded due to preferential material removal at the tip by large- Area EB irradiation. By using this phenomenon, we also reported that the micro burrs on SKD11 which were generated with EDM, were completely removed. In this study, micro-deburring on magnetic and non-magnetic materials is investigated. High efficient micro-deburring is also tried by using magnetic block and thermal insulation plate. SKD11, Ni, Cu, Ti-6Al-4V and Al are used as magnetic and non-magnetic materials. Micro burrs whose height are about 40 μm, are generated at the edge of many holes machined by EDM drilling. Pulse duration Dp and pulse frequency fp of large- Area EB are fixed at 2 μs and 0.125Hz, respectively. The energy density Ed and number of irradiation N are varied in order to investigate the effects of Ed and N on deburring characteristics. Burrs are completely removed on magnetic workpieces of SKD11 and Ni at Ed=15 J/cm2 over N=30 shots, while complete removal of burrs is difficult for non-magnetic workpieces of Cu, Ti-6Al-4V and Al. When the magnetic block is placed under the Cu, complete removal of burrs on Cu is successfully done due to concentrating of EB. Moreover, removal ratio of burrs on Cu is increased by inserting the thermal insulation plate between Cu and magnetic block. These results suggest that high efficient micro-deburring can be done on any materials by using the magnetic block and insulation plate.

KW - Deburring

KW - Large- Area EB irradiation

KW - Magnetic materials

KW - Micro burr

KW - Non-magnetic materials

UR - http://www.scopus.com/inward/record.url?scp=84984656840&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84984656840&partnerID=8YFLogxK

M3 - Conference contribution

AN - SCOPUS:84984656840

BT - Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016

PB - euspen

ER -