Study on cavitation mechanism in hydraulic oil flow with the use of needle projection

Seiichi Washio, Satoshi Takahashi, Shinichiro Kawahara, Masanori Kishitani

Research output: Contribution to journalArticle

2 Citations (Scopus)

Abstract

Cavitation occurring at a sharp projection in a hydraulic oil flow was observed, using a microscope, video-cameras, laser beam and a photo-multiplier. On a sewing needle employed as a projection, a tiny cavity as small as several 10 μm in length suddenly emerged at its tip and stayed afterwards. In vigorous cavitation the needle emitted light and simultaneously produced synchronized electric charge. At the same time the electrode placed downstream of the needle detected the electric charge of an opposite sign. The observations by the microscope made it possible to determine the exact start of cavitation, which turned out to depend on the oil temperature as well as the downstream pressure. Moreover the streamline stretching from the tip of the needle became visible as the flow rate increased. There was evidence that the highly viscous shear flow generated heat at the separation point, which probably explains why the streamline was visualized.

Original languageEnglish
Pages (from-to)2912-2919
Number of pages8
JournalNihon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B
Volume66
Issue number651
DOIs
Publication statusPublished - Nov 2000

Keywords

  • Cavitation inception
  • Heat generation
  • Hydraulic oil flow
  • Light emission
  • Needle
  • Separation streamline
  • Station ary cavity

ASJC Scopus subject areas

  • Condensed Matter Physics
  • Mechanical Engineering

Fingerprint Dive into the research topics of 'Study on cavitation mechanism in hydraulic oil flow with the use of needle projection'. Together they form a unique fingerprint.

  • Cite this