Soot precursor and PM formation in diffusion flame using thermally decomposed aliphatic diesel fuel

Hirofumi Noge, Yuuichi Yoshihara, Yoshiyuki Kidoguchi, Kei Miwa

Research output: Contribution to journalArticlepeer-review

3 Citations (Scopus)

Abstract

Experimental work was performed to investigate formation of soot precursor and PM in diesel combustion process using a flow reactor and a laminar co-flow diffusion burner. Thermally decomposed aliphatic diesel fuel produced in the flow reactor was supplied directly to the burner as fuel. Measurements were conducted in the flow reactor, in the flame, and the exhaust for light hydrocarbons, low molecular weight aromatics, PAHs, soot precursor, and PM. Results show that many PAHs ranging from two to five-member ring are already formed as well as light hydrocarbon such as C2H4, C 2H2 and CH4 during pyrolysis in the flow reactor. Exhaust PM is subject to be formed when abundant C2H 2, Benzene, PAHs are produced during high temperature thermal decomposition of aliphatic diesel fuel, and the structure of PM has long chain-like aggregation. Measured fluorescence spectrometry indicates 464 nm peak. This peak is caused by soot precursor, which is in the SOF extracted from PM.

Original languageEnglish
Pages (from-to)328-334
Number of pages7
JournalNihon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B
Volume73
Issue number1
DOIs
Publication statusPublished - Jan 2007
Externally publishedYes

Keywords

  • Combustion
  • Combustion products
  • Diesel fuel
  • PAHs
  • Soot formation
  • Soot precursor
  • Spectroscopic measurement
  • Thermal decomposition

ASJC Scopus subject areas

  • Condensed Matter Physics
  • Mechanical Engineering

Fingerprint Dive into the research topics of 'Soot precursor and PM formation in diffusion flame using thermally decomposed aliphatic diesel fuel'. Together they form a unique fingerprint.

Cite this