Solvent extraction of Au(III) for preparation of a carrier-free multitracer and an Au tracer from an Au target

R. G. Weginwar, Y. Kobayashi, S. Ambe, B. Liu, S. Enomoto, F. Ambe

Research output: Contribution to journalArticle

3 Citations (Scopus)

Abstract

Separation of Au(III) and various carrier-free radionuclides by solvent extraction was investigated using an Au target irradiated by an energetic heavy-ion beam. Percentage extraction of Au(III) and coextraction of the radionuclides were determined with varying parameters such as kinds of solvent, molarity of HCl or pH, and Au concentration. Under the conditions where Au(III) was effectively extracted, namely extraction with ethyl acetate or isobutyl methyl ketone from 3 mol·dm-3 HCl, carrier-free radionuclides of many elements were found to be more or less coextracted. Coextraction of radionuclides of some elements was found to increase with an increase in the concentration of Au(III). This finding is ascribed to the formation of strong association of the complex of these elements with chloroauric acid. In order to avoid serious loss of these elements by the extraction, lowering of the Au(III) concentration or the use of a masking agent such as sodium citrate is necessary. Gold(III) was shown to be effectively back extracted with a 0.1 mol·dm-3 aqueous solution of 2-amino-2-hydroxymethyl-1,3-propanediol. Thus, a radiochemical procedure has been established for preparing a carrier-free multitracer and an Au tracer with carrier form from an Au target irradiated with a heavy-ion beam. Both tracers are now used individually for chemical and biological experiments.

Original languageEnglish
Pages (from-to)45-54
Number of pages10
JournalJournal of Radioanalytical and Nuclear Chemistry
Volume210
Issue number1
DOIs
Publication statusPublished - 1996
Externally publishedYes

    Fingerprint

ASJC Scopus subject areas

  • Analytical Chemistry
  • Inorganic Chemistry
  • Nuclear Energy and Engineering

Cite this