Sol-gel synthesis of YAG/Al2O3 long fibres from water solvent systems

Kiyoshi Okada, Takayuki Motohashi, Yoshikazu Kameshima, Atsuo Yasumori

Research output: Contribution to journalArticle

16 Citations (Scopus)

Abstract

Y3Al5O12(YAG)Al2O3 long fibres were prepared by a sol-gel method using water as the solvent. They were synthesized from aluminium nitrate and chloride solutions, aluminium salt, aluminium metal and Y2O3. The starting materials were dissolved by refluxing at 100°C for 2-18 h and were then condensed. The fibre spinnability was examined by a hand drawing method using a glass rod. In the nitrate solution system, the composition range available for fibre preparation was very limited because nitrate ions decomposed during the refluxing, raising the solution pH and precipitating the Y component. On the other hand, the composition range of the fibres prepared from the chloride system was 0/10 ≤ YAG/Al2O3 ≤ 6/4 (volume ratio) and was wider than that from the nitrate system. The YAG/Al2O3 fibres prepared by firing at 1300°C became denser with faster heating rates. The grain size in the fired fibres was small, below the firing temperature at 1400°C, but increased greatly above that temperature. (C) 2000 Elsevier Science Ltd. All rights reserved.

Original languageEnglish
Pages (from-to)561-567
Number of pages7
JournalJournal of the European Ceramic Society
Volume20
Issue number5
DOIs
Publication statusPublished - May 2000
Externally publishedYes

Fingerprint

Sol-gels
Water
Fibers
Nitrates
Aluminum
Heating rate
Chemical analysis
Sol-gel process
Chlorides
Salts
Metals
Ions
Glass
Temperature

Keywords

  • Fibre processing
  • Microstructure-final
  • Sol-gel processes
  • YAG/AlO fibres

ASJC Scopus subject areas

  • Ceramics and Composites

Cite this

Sol-gel synthesis of YAG/Al2O3 long fibres from water solvent systems. / Okada, Kiyoshi; Motohashi, Takayuki; Kameshima, Yoshikazu; Yasumori, Atsuo.

In: Journal of the European Ceramic Society, Vol. 20, No. 5, 05.2000, p. 561-567.

Research output: Contribution to journalArticle

Okada, Kiyoshi ; Motohashi, Takayuki ; Kameshima, Yoshikazu ; Yasumori, Atsuo. / Sol-gel synthesis of YAG/Al2O3 long fibres from water solvent systems. In: Journal of the European Ceramic Society. 2000 ; Vol. 20, No. 5. pp. 561-567.
@article{dbfd547b3db24ab1863b4733a98f2b0a,
title = "Sol-gel synthesis of YAG/Al2O3 long fibres from water solvent systems",
abstract = "Y3Al5O12(YAG)Al2O3 long fibres were prepared by a sol-gel method using water as the solvent. They were synthesized from aluminium nitrate and chloride solutions, aluminium salt, aluminium metal and Y2O3. The starting materials were dissolved by refluxing at 100°C for 2-18 h and were then condensed. The fibre spinnability was examined by a hand drawing method using a glass rod. In the nitrate solution system, the composition range available for fibre preparation was very limited because nitrate ions decomposed during the refluxing, raising the solution pH and precipitating the Y component. On the other hand, the composition range of the fibres prepared from the chloride system was 0/10 ≤ YAG/Al2O3 ≤ 6/4 (volume ratio) and was wider than that from the nitrate system. The YAG/Al2O3 fibres prepared by firing at 1300°C became denser with faster heating rates. The grain size in the fired fibres was small, below the firing temperature at 1400°C, but increased greatly above that temperature. (C) 2000 Elsevier Science Ltd. All rights reserved.",
keywords = "Fibre processing, Microstructure-final, Sol-gel processes, YAG/AlO fibres",
author = "Kiyoshi Okada and Takayuki Motohashi and Yoshikazu Kameshima and Atsuo Yasumori",
year = "2000",
month = "5",
doi = "10.1016/S0955-2219(99)00254-X",
language = "English",
volume = "20",
pages = "561--567",
journal = "Journal of the European Ceramic Society",
issn = "0955-2219",
publisher = "Elsevier BV",
number = "5",

}

TY - JOUR

T1 - Sol-gel synthesis of YAG/Al2O3 long fibres from water solvent systems

AU - Okada, Kiyoshi

AU - Motohashi, Takayuki

AU - Kameshima, Yoshikazu

AU - Yasumori, Atsuo

PY - 2000/5

Y1 - 2000/5

N2 - Y3Al5O12(YAG)Al2O3 long fibres were prepared by a sol-gel method using water as the solvent. They were synthesized from aluminium nitrate and chloride solutions, aluminium salt, aluminium metal and Y2O3. The starting materials were dissolved by refluxing at 100°C for 2-18 h and were then condensed. The fibre spinnability was examined by a hand drawing method using a glass rod. In the nitrate solution system, the composition range available for fibre preparation was very limited because nitrate ions decomposed during the refluxing, raising the solution pH and precipitating the Y component. On the other hand, the composition range of the fibres prepared from the chloride system was 0/10 ≤ YAG/Al2O3 ≤ 6/4 (volume ratio) and was wider than that from the nitrate system. The YAG/Al2O3 fibres prepared by firing at 1300°C became denser with faster heating rates. The grain size in the fired fibres was small, below the firing temperature at 1400°C, but increased greatly above that temperature. (C) 2000 Elsevier Science Ltd. All rights reserved.

AB - Y3Al5O12(YAG)Al2O3 long fibres were prepared by a sol-gel method using water as the solvent. They were synthesized from aluminium nitrate and chloride solutions, aluminium salt, aluminium metal and Y2O3. The starting materials were dissolved by refluxing at 100°C for 2-18 h and were then condensed. The fibre spinnability was examined by a hand drawing method using a glass rod. In the nitrate solution system, the composition range available for fibre preparation was very limited because nitrate ions decomposed during the refluxing, raising the solution pH and precipitating the Y component. On the other hand, the composition range of the fibres prepared from the chloride system was 0/10 ≤ YAG/Al2O3 ≤ 6/4 (volume ratio) and was wider than that from the nitrate system. The YAG/Al2O3 fibres prepared by firing at 1300°C became denser with faster heating rates. The grain size in the fired fibres was small, below the firing temperature at 1400°C, but increased greatly above that temperature. (C) 2000 Elsevier Science Ltd. All rights reserved.

KW - Fibre processing

KW - Microstructure-final

KW - Sol-gel processes

KW - YAG/AlO fibres

UR - http://www.scopus.com/inward/record.url?scp=0033994473&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0033994473&partnerID=8YFLogxK

U2 - 10.1016/S0955-2219(99)00254-X

DO - 10.1016/S0955-2219(99)00254-X

M3 - Article

AN - SCOPUS:0033994473

VL - 20

SP - 561

EP - 567

JO - Journal of the European Ceramic Society

JF - Journal of the European Ceramic Society

SN - 0955-2219

IS - 5

ER -