Small fatigue crack growth behavior from artificial notch with focused ion beam in annealed 0.45% carbon steel

Junji Sakamoto, Yoshimasa Takahashi, Hiroshi Noguchi

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

The aim of this study is firstly to investigate the applicability of a sharp notch with Focused Ion Beam (FIB) as a crack for fatigue limit evaluation. Secondly we investigate a condition in which artificial defects (drilled hole, FIB notch) can be used as a crack for fatigue limit evaluation. To achieve the aim, the growth behaviors and the non-propagating crack sizes of small fatigue cracks initiated from a FIB notch and a drilled hole are carefully compared with those of an annealed fatigue crack which imitates an ideally sharp crack. The results show that a FIB notch can be used as a crack for fatigue limit evaluation under some conditions. The results also show that the condition which controls the applicability of an artificial defect as an ideal crack for fatigue limit evaluation is strongly dependent on the relation between (i) the length of a non-propagating fatigue crack and (ii) the crack length when the small fatigue crack growth behaviors from an artificial defect and an ideal pre-crack become almost the same. It is found that the length of (ii) can be obtained by the analyses using the number of cycles from a certain crack length to failure.

Original languageEnglish
Title of host publicationAdvances in Fracture and Damage Mechanics X
Pages319-322
Number of pages4
DOIs
Publication statusPublished - Jan 1 2012
Externally publishedYes
Event10th International Conference on Fracture and Damage Mechanics, FDM2011 - Dubrovnik, Croatia
Duration: Sep 19 2011Sep 21 2011

Publication series

NameKey Engineering Materials
Volume488-489
ISSN (Print)1013-9826

Conference

Conference10th International Conference on Fracture and Damage Mechanics, FDM2011
CountryCroatia
CityDubrovnik
Period9/19/119/21/11

Fingerprint

Focused ion beams
Fatigue crack propagation
Carbon steel
Cracks
Fatigue of materials
Defects

Keywords

  • Artificial pre-crack
  • Fatigue limit
  • Focused ion beam
  • Small fatigue crack growth analysis

ASJC Scopus subject areas

  • Materials Science(all)
  • Mechanics of Materials
  • Mechanical Engineering

Cite this

Sakamoto, J., Takahashi, Y., & Noguchi, H. (2012). Small fatigue crack growth behavior from artificial notch with focused ion beam in annealed 0.45% carbon steel. In Advances in Fracture and Damage Mechanics X (pp. 319-322). (Key Engineering Materials; Vol. 488-489). https://doi.org/10.4028/www.scientific.net/KEM.488-489.319

Small fatigue crack growth behavior from artificial notch with focused ion beam in annealed 0.45% carbon steel. / Sakamoto, Junji; Takahashi, Yoshimasa; Noguchi, Hiroshi.

Advances in Fracture and Damage Mechanics X. 2012. p. 319-322 (Key Engineering Materials; Vol. 488-489).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Sakamoto, J, Takahashi, Y & Noguchi, H 2012, Small fatigue crack growth behavior from artificial notch with focused ion beam in annealed 0.45% carbon steel. in Advances in Fracture and Damage Mechanics X. Key Engineering Materials, vol. 488-489, pp. 319-322, 10th International Conference on Fracture and Damage Mechanics, FDM2011, Dubrovnik, Croatia, 9/19/11. https://doi.org/10.4028/www.scientific.net/KEM.488-489.319
Sakamoto J, Takahashi Y, Noguchi H. Small fatigue crack growth behavior from artificial notch with focused ion beam in annealed 0.45% carbon steel. In Advances in Fracture and Damage Mechanics X. 2012. p. 319-322. (Key Engineering Materials). https://doi.org/10.4028/www.scientific.net/KEM.488-489.319
Sakamoto, Junji ; Takahashi, Yoshimasa ; Noguchi, Hiroshi. / Small fatigue crack growth behavior from artificial notch with focused ion beam in annealed 0.45% carbon steel. Advances in Fracture and Damage Mechanics X. 2012. pp. 319-322 (Key Engineering Materials).
@inproceedings{438b1865a027435b98efbfed8a248e9b,
title = "Small fatigue crack growth behavior from artificial notch with focused ion beam in annealed 0.45{\%} carbon steel",
abstract = "The aim of this study is firstly to investigate the applicability of a sharp notch with Focused Ion Beam (FIB) as a crack for fatigue limit evaluation. Secondly we investigate a condition in which artificial defects (drilled hole, FIB notch) can be used as a crack for fatigue limit evaluation. To achieve the aim, the growth behaviors and the non-propagating crack sizes of small fatigue cracks initiated from a FIB notch and a drilled hole are carefully compared with those of an annealed fatigue crack which imitates an ideally sharp crack. The results show that a FIB notch can be used as a crack for fatigue limit evaluation under some conditions. The results also show that the condition which controls the applicability of an artificial defect as an ideal crack for fatigue limit evaluation is strongly dependent on the relation between (i) the length of a non-propagating fatigue crack and (ii) the crack length when the small fatigue crack growth behaviors from an artificial defect and an ideal pre-crack become almost the same. It is found that the length of (ii) can be obtained by the analyses using the number of cycles from a certain crack length to failure.",
keywords = "Artificial pre-crack, Fatigue limit, Focused ion beam, Small fatigue crack growth analysis",
author = "Junji Sakamoto and Yoshimasa Takahashi and Hiroshi Noguchi",
year = "2012",
month = "1",
day = "1",
doi = "10.4028/www.scientific.net/KEM.488-489.319",
language = "English",
isbn = "9783037852187",
series = "Key Engineering Materials",
pages = "319--322",
booktitle = "Advances in Fracture and Damage Mechanics X",

}

TY - GEN

T1 - Small fatigue crack growth behavior from artificial notch with focused ion beam in annealed 0.45% carbon steel

AU - Sakamoto, Junji

AU - Takahashi, Yoshimasa

AU - Noguchi, Hiroshi

PY - 2012/1/1

Y1 - 2012/1/1

N2 - The aim of this study is firstly to investigate the applicability of a sharp notch with Focused Ion Beam (FIB) as a crack for fatigue limit evaluation. Secondly we investigate a condition in which artificial defects (drilled hole, FIB notch) can be used as a crack for fatigue limit evaluation. To achieve the aim, the growth behaviors and the non-propagating crack sizes of small fatigue cracks initiated from a FIB notch and a drilled hole are carefully compared with those of an annealed fatigue crack which imitates an ideally sharp crack. The results show that a FIB notch can be used as a crack for fatigue limit evaluation under some conditions. The results also show that the condition which controls the applicability of an artificial defect as an ideal crack for fatigue limit evaluation is strongly dependent on the relation between (i) the length of a non-propagating fatigue crack and (ii) the crack length when the small fatigue crack growth behaviors from an artificial defect and an ideal pre-crack become almost the same. It is found that the length of (ii) can be obtained by the analyses using the number of cycles from a certain crack length to failure.

AB - The aim of this study is firstly to investigate the applicability of a sharp notch with Focused Ion Beam (FIB) as a crack for fatigue limit evaluation. Secondly we investigate a condition in which artificial defects (drilled hole, FIB notch) can be used as a crack for fatigue limit evaluation. To achieve the aim, the growth behaviors and the non-propagating crack sizes of small fatigue cracks initiated from a FIB notch and a drilled hole are carefully compared with those of an annealed fatigue crack which imitates an ideally sharp crack. The results show that a FIB notch can be used as a crack for fatigue limit evaluation under some conditions. The results also show that the condition which controls the applicability of an artificial defect as an ideal crack for fatigue limit evaluation is strongly dependent on the relation between (i) the length of a non-propagating fatigue crack and (ii) the crack length when the small fatigue crack growth behaviors from an artificial defect and an ideal pre-crack become almost the same. It is found that the length of (ii) can be obtained by the analyses using the number of cycles from a certain crack length to failure.

KW - Artificial pre-crack

KW - Fatigue limit

KW - Focused ion beam

KW - Small fatigue crack growth analysis

UR - http://www.scopus.com/inward/record.url?scp=80053970511&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=80053970511&partnerID=8YFLogxK

U2 - 10.4028/www.scientific.net/KEM.488-489.319

DO - 10.4028/www.scientific.net/KEM.488-489.319

M3 - Conference contribution

AN - SCOPUS:80053970511

SN - 9783037852187

T3 - Key Engineering Materials

SP - 319

EP - 322

BT - Advances in Fracture and Damage Mechanics X

ER -