Removal of Metal Impurities in Molten Silicon by Directional Solidification with Electron Beam Heating

Noriyoshi Yuge, Kazuhiro Hanazawa, Shoichi Hiwasa, Yoshiei Katou

Research output: Contribution to journalArticle

10 Citations (Scopus)

Abstract

As one of sequential purification processes where high purity silicon for solar grade silicon (SOG-Si) was manufactured by removing impurities from metallurgical grade silicon (MG-Si), a pyrometallurgical method to remove metallic impurities was developed in an industrial scale, utilizing segregation effect of metallic impurities during solidification. The removal of metallic impurities from MG-Si was carried out with electron beam heating equipment. Molten silicon was supplied continuously at a constant mass to a mould made of water-cooled copper and was gradually solidified from the bottom to the upper direction. Iron concentration was presented by Pfann's and Burton's equations, and was removed from 1500 mass ppm of initial iron concentration to below 1 mass ppm. Aluminum was removed in excess, presumably because of vaporization to gas phase. We found that metallic impurities were not removed above a certain height of an ingot by partition during directional solidification and these phenomena depended on iron concentration condensed in the silicon pool. Mechanism for metallic impurity removals was estimated, on the basis of visual examination of structure and EPMA. Iron concentration profile of ingot and critical height for purification were estimated, through experiments using a 20 kg scale, and were verified to be applicable to industrial scale experiments (150 kg scale). Solar grade silicon was made by way of trial with this process and it was verified to have satisfactory quality as a material for a solar cell.

Original languageEnglish
Pages (from-to)575-582
Number of pages8
JournalNippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals
Volume67
Issue number10
Publication statusPublished - Oct 2003
Externally publishedYes

Fingerprint

Silicon
Solidification
Molten materials
Electron beams
Metals
electron beams
Impurities
Heating
impurities
heating
silicon
grade
metals
Iron
iron
ingots
Ingots
purification
Purification
heating equipment

Keywords

  • Aluminum
  • Directional solidification
  • Electron beam
  • Iron
  • Metallurgical grade silicon
  • Silicon
  • Solar grade silicon
  • Titanium

ASJC Scopus subject areas

  • Metals and Alloys

Cite this

Removal of Metal Impurities in Molten Silicon by Directional Solidification with Electron Beam Heating. / Yuge, Noriyoshi; Hanazawa, Kazuhiro; Hiwasa, Shoichi; Katou, Yoshiei.

In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals, Vol. 67, No. 10, 10.2003, p. 575-582.

Research output: Contribution to journalArticle

@article{a0bce9996bb5471ab77c1a6b75125b84,
title = "Removal of Metal Impurities in Molten Silicon by Directional Solidification with Electron Beam Heating",
abstract = "As one of sequential purification processes where high purity silicon for solar grade silicon (SOG-Si) was manufactured by removing impurities from metallurgical grade silicon (MG-Si), a pyrometallurgical method to remove metallic impurities was developed in an industrial scale, utilizing segregation effect of metallic impurities during solidification. The removal of metallic impurities from MG-Si was carried out with electron beam heating equipment. Molten silicon was supplied continuously at a constant mass to a mould made of water-cooled copper and was gradually solidified from the bottom to the upper direction. Iron concentration was presented by Pfann's and Burton's equations, and was removed from 1500 mass ppm of initial iron concentration to below 1 mass ppm. Aluminum was removed in excess, presumably because of vaporization to gas phase. We found that metallic impurities were not removed above a certain height of an ingot by partition during directional solidification and these phenomena depended on iron concentration condensed in the silicon pool. Mechanism for metallic impurity removals was estimated, on the basis of visual examination of structure and EPMA. Iron concentration profile of ingot and critical height for purification were estimated, through experiments using a 20 kg scale, and were verified to be applicable to industrial scale experiments (150 kg scale). Solar grade silicon was made by way of trial with this process and it was verified to have satisfactory quality as a material for a solar cell.",
keywords = "Aluminum, Directional solidification, Electron beam, Iron, Metallurgical grade silicon, Silicon, Solar grade silicon, Titanium",
author = "Noriyoshi Yuge and Kazuhiro Hanazawa and Shoichi Hiwasa and Yoshiei Katou",
year = "2003",
month = "10",
language = "English",
volume = "67",
pages = "575--582",
journal = "Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals",
issn = "0021-4876",
publisher = "Japan Institute of Metals (JIM)",
number = "10",

}

TY - JOUR

T1 - Removal of Metal Impurities in Molten Silicon by Directional Solidification with Electron Beam Heating

AU - Yuge, Noriyoshi

AU - Hanazawa, Kazuhiro

AU - Hiwasa, Shoichi

AU - Katou, Yoshiei

PY - 2003/10

Y1 - 2003/10

N2 - As one of sequential purification processes where high purity silicon for solar grade silicon (SOG-Si) was manufactured by removing impurities from metallurgical grade silicon (MG-Si), a pyrometallurgical method to remove metallic impurities was developed in an industrial scale, utilizing segregation effect of metallic impurities during solidification. The removal of metallic impurities from MG-Si was carried out with electron beam heating equipment. Molten silicon was supplied continuously at a constant mass to a mould made of water-cooled copper and was gradually solidified from the bottom to the upper direction. Iron concentration was presented by Pfann's and Burton's equations, and was removed from 1500 mass ppm of initial iron concentration to below 1 mass ppm. Aluminum was removed in excess, presumably because of vaporization to gas phase. We found that metallic impurities were not removed above a certain height of an ingot by partition during directional solidification and these phenomena depended on iron concentration condensed in the silicon pool. Mechanism for metallic impurity removals was estimated, on the basis of visual examination of structure and EPMA. Iron concentration profile of ingot and critical height for purification were estimated, through experiments using a 20 kg scale, and were verified to be applicable to industrial scale experiments (150 kg scale). Solar grade silicon was made by way of trial with this process and it was verified to have satisfactory quality as a material for a solar cell.

AB - As one of sequential purification processes where high purity silicon for solar grade silicon (SOG-Si) was manufactured by removing impurities from metallurgical grade silicon (MG-Si), a pyrometallurgical method to remove metallic impurities was developed in an industrial scale, utilizing segregation effect of metallic impurities during solidification. The removal of metallic impurities from MG-Si was carried out with electron beam heating equipment. Molten silicon was supplied continuously at a constant mass to a mould made of water-cooled copper and was gradually solidified from the bottom to the upper direction. Iron concentration was presented by Pfann's and Burton's equations, and was removed from 1500 mass ppm of initial iron concentration to below 1 mass ppm. Aluminum was removed in excess, presumably because of vaporization to gas phase. We found that metallic impurities were not removed above a certain height of an ingot by partition during directional solidification and these phenomena depended on iron concentration condensed in the silicon pool. Mechanism for metallic impurity removals was estimated, on the basis of visual examination of structure and EPMA. Iron concentration profile of ingot and critical height for purification were estimated, through experiments using a 20 kg scale, and were verified to be applicable to industrial scale experiments (150 kg scale). Solar grade silicon was made by way of trial with this process and it was verified to have satisfactory quality as a material for a solar cell.

KW - Aluminum

KW - Directional solidification

KW - Electron beam

KW - Iron

KW - Metallurgical grade silicon

KW - Silicon

KW - Solar grade silicon

KW - Titanium

UR - http://www.scopus.com/inward/record.url?scp=0345012060&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0345012060&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:0345012060

VL - 67

SP - 575

EP - 582

JO - Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals

JF - Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals

SN - 0021-4876

IS - 10

ER -