Remote ultrasound diagnostic system

M. Mitsuishi, S. Warisawa, T. Tsuda, T. Higuchi, N. Koizumi, H. Hashizume, K. Fujiwara

Research output: Contribution to journalConference article

58 Citations (Scopus)

Abstract

This paper presents a master-slave type remote ultrasound diagnostic system. In the system, the motion of the master manipulator is controlled by a medical doctor and is reproduced by a slave manipulator carrying an ultrasound probe. The contact force between the probe and a patient is fed back to the master manipulator. High-rigidity was achieved by adopting radius-guides in the slave manipulator. These allow precise position and orientation control of the ultrasound probe. In the master manipulator, a special mechanism keeps the orientation of the force sensor constant. The mechanism separates the functions determining the orientation and position of the probe. The control algorithm implements impedance control to reflect force, with the viscosity of the system varied depending on the measured force at the slave manipulator. Furthermore, a control strategy to enhance the safety of the system is proposed. Using the developed system, remote ultrasound diagnosis experiments through ISDN lines were success fully executed.

Original languageEnglish
Pages (from-to)1567-1574
Number of pages8
JournalProceedings - IEEE International Conference on Robotics and Automation
Volume2
Publication statusPublished - Jan 1 2001
Event2001IEEE International Conference on Robotics and Automation (ICRA) - Seoul, Korea, Republic of
Duration: May 21 2001May 26 2001

ASJC Scopus subject areas

  • Software
  • Control and Systems Engineering
  • Artificial Intelligence
  • Electrical and Electronic Engineering

Fingerprint Dive into the research topics of 'Remote ultrasound diagnostic system'. Together they form a unique fingerprint.

  • Cite this

    Mitsuishi, M., Warisawa, S., Tsuda, T., Higuchi, T., Koizumi, N., Hashizume, H., & Fujiwara, K. (2001). Remote ultrasound diagnostic system. Proceedings - IEEE International Conference on Robotics and Automation, 2, 1567-1574.