Redox state of seafloor hydrothermal fluids and its effect on sulfide mineralization

Shogo Kawasumi, Hitoshi Chiba

Research output: Contribution to journalArticle

11 Citations (Scopus)

Abstract

The redox conditions (fO2-fS2) of seafloor hydrothermal fluids were calculated from dissolved H2 and H2S concentrations at conditions of 300 and 350 °C, 71–409 bars, and seawater salinity. The results were compared with fO2-fS2 conditions estimated from black smoker mineralogy as reported by previous studies and our own investigations for various geological settings, including the Okinawa Trough (sediment-rich Hakurei and sediment-poor Jade fields), the Manus back-arc basin (felsic-hosted PACMANUS and basalt-hosted Vienna Woods fields), and the Central Indian Ridge (mafic/ultramafic-hosted Kairei and basalt-hosted Edmond fields). In most cases, the calculated fluid fO2-fS2 conditions agree well with estimates from primary mineral assemblages and FeS contents in sphalerite/wurtzite. This correlation suggests that the redox states of sulfide mineralization in chimneys typically reflect dissolved H2 and H2S concentrations in vent fluids. It should be noted that variable H2 concentrations in vent fluids (0.01–19 mmol/kg) dominantly control not only fluid fO2 but also fS2, whereas the more uniform H2S concentrations (1–20 mmol/kg) have less of an influence on fluid fS2. Fluid-sediment interaction elevates H2 concentrations to over 1 mmol/kg, which sufficiently lowers fO2-fS2 to the pyrrhotite stability field; however, low H2S concentrations do not necessarily account for low fS2. Calculations for the H2-poor (≤ 0.1 mmol/kg) and H2S-rich (~ 10 mmol/kg) fluids in some felsic-hosted arc-backarc systems indicate relatively high fO2-fS2 states consistent with the bornite-pyrite-chalcopyrite assemblages. These redox conditions result from a combination of fluid-mineral equilibria at relatively oxidizing conditions ± elevated H2S concentrations from magmatic degassing. Redox calculations at 350 °C indicate that neither pyrite nor pyrrhotite is stable in the initial hot fluids of the TAG and ultramafic-hosted Mid-Atlantic Ridge systems due to the low H2S concentrations. With cooling of these fluids, either conductively or by interacting with seawater, higher fS2 and fO2 result and Fe-sulfides are stable, in agreement with the higher-fO2-fS2 mineral assemblages observed.

Original languageEnglish
Pages (from-to)25-37
Number of pages13
JournalChemical Geology
Volume451
DOIs
Publication statusPublished - Feb 20 2017

Fingerprint

Sulfides
hydrothermal fluid
seafloor
sulfide
mineralization
Fluids
fluid
Minerals
Sediments
redox conditions
pyrrhotite
Vents
Seawater
pyrite
mineral
basalt
effect
Oxidation-Reduction
sediment
black smoker

Keywords

  • Fluid-sediment interaction
  • Magmatic volatile
  • Phase separation
  • Redox state
  • Seafloor hydrothermal fluid
  • Sulfide mineralization

ASJC Scopus subject areas

  • Geology
  • Geochemistry and Petrology

Cite this

Redox state of seafloor hydrothermal fluids and its effect on sulfide mineralization. / Kawasumi, Shogo; Chiba, Hitoshi.

In: Chemical Geology, Vol. 451, 20.02.2017, p. 25-37.

Research output: Contribution to journalArticle

Kawasumi, Shogo ; Chiba, Hitoshi. / Redox state of seafloor hydrothermal fluids and its effect on sulfide mineralization. In: Chemical Geology. 2017 ; Vol. 451. pp. 25-37.
@article{0e6ff08db0374c5d8cc6874eeae0c613,
title = "Redox state of seafloor hydrothermal fluids and its effect on sulfide mineralization",
abstract = "The redox conditions (fO2-fS2) of seafloor hydrothermal fluids were calculated from dissolved H2 and H2S concentrations at conditions of 300 and 350 °C, 71–409 bars, and seawater salinity. The results were compared with fO2-fS2 conditions estimated from black smoker mineralogy as reported by previous studies and our own investigations for various geological settings, including the Okinawa Trough (sediment-rich Hakurei and sediment-poor Jade fields), the Manus back-arc basin (felsic-hosted PACMANUS and basalt-hosted Vienna Woods fields), and the Central Indian Ridge (mafic/ultramafic-hosted Kairei and basalt-hosted Edmond fields). In most cases, the calculated fluid fO2-fS2 conditions agree well with estimates from primary mineral assemblages and FeS contents in sphalerite/wurtzite. This correlation suggests that the redox states of sulfide mineralization in chimneys typically reflect dissolved H2 and H2S concentrations in vent fluids. It should be noted that variable H2 concentrations in vent fluids (0.01–19 mmol/kg) dominantly control not only fluid fO2 but also fS2, whereas the more uniform H2S concentrations (1–20 mmol/kg) have less of an influence on fluid fS2. Fluid-sediment interaction elevates H2 concentrations to over 1 mmol/kg, which sufficiently lowers fO2-fS2 to the pyrrhotite stability field; however, low H2S concentrations do not necessarily account for low fS2. Calculations for the H2-poor (≤ 0.1 mmol/kg) and H2S-rich (~ 10 mmol/kg) fluids in some felsic-hosted arc-backarc systems indicate relatively high fO2-fS2 states consistent with the bornite-pyrite-chalcopyrite assemblages. These redox conditions result from a combination of fluid-mineral equilibria at relatively oxidizing conditions ± elevated H2S concentrations from magmatic degassing. Redox calculations at 350 °C indicate that neither pyrite nor pyrrhotite is stable in the initial hot fluids of the TAG and ultramafic-hosted Mid-Atlantic Ridge systems due to the low H2S concentrations. With cooling of these fluids, either conductively or by interacting with seawater, higher fS2 and fO2 result and Fe-sulfides are stable, in agreement with the higher-fO2-fS2 mineral assemblages observed.",
keywords = "Fluid-sediment interaction, Magmatic volatile, Phase separation, Redox state, Seafloor hydrothermal fluid, Sulfide mineralization",
author = "Shogo Kawasumi and Hitoshi Chiba",
year = "2017",
month = "2",
day = "20",
doi = "10.1016/j.chemgeo.2017.01.001",
language = "English",
volume = "451",
pages = "25--37",
journal = "Chemical Geology",
issn = "0009-2541",
publisher = "Elsevier",

}

TY - JOUR

T1 - Redox state of seafloor hydrothermal fluids and its effect on sulfide mineralization

AU - Kawasumi, Shogo

AU - Chiba, Hitoshi

PY - 2017/2/20

Y1 - 2017/2/20

N2 - The redox conditions (fO2-fS2) of seafloor hydrothermal fluids were calculated from dissolved H2 and H2S concentrations at conditions of 300 and 350 °C, 71–409 bars, and seawater salinity. The results were compared with fO2-fS2 conditions estimated from black smoker mineralogy as reported by previous studies and our own investigations for various geological settings, including the Okinawa Trough (sediment-rich Hakurei and sediment-poor Jade fields), the Manus back-arc basin (felsic-hosted PACMANUS and basalt-hosted Vienna Woods fields), and the Central Indian Ridge (mafic/ultramafic-hosted Kairei and basalt-hosted Edmond fields). In most cases, the calculated fluid fO2-fS2 conditions agree well with estimates from primary mineral assemblages and FeS contents in sphalerite/wurtzite. This correlation suggests that the redox states of sulfide mineralization in chimneys typically reflect dissolved H2 and H2S concentrations in vent fluids. It should be noted that variable H2 concentrations in vent fluids (0.01–19 mmol/kg) dominantly control not only fluid fO2 but also fS2, whereas the more uniform H2S concentrations (1–20 mmol/kg) have less of an influence on fluid fS2. Fluid-sediment interaction elevates H2 concentrations to over 1 mmol/kg, which sufficiently lowers fO2-fS2 to the pyrrhotite stability field; however, low H2S concentrations do not necessarily account for low fS2. Calculations for the H2-poor (≤ 0.1 mmol/kg) and H2S-rich (~ 10 mmol/kg) fluids in some felsic-hosted arc-backarc systems indicate relatively high fO2-fS2 states consistent with the bornite-pyrite-chalcopyrite assemblages. These redox conditions result from a combination of fluid-mineral equilibria at relatively oxidizing conditions ± elevated H2S concentrations from magmatic degassing. Redox calculations at 350 °C indicate that neither pyrite nor pyrrhotite is stable in the initial hot fluids of the TAG and ultramafic-hosted Mid-Atlantic Ridge systems due to the low H2S concentrations. With cooling of these fluids, either conductively or by interacting with seawater, higher fS2 and fO2 result and Fe-sulfides are stable, in agreement with the higher-fO2-fS2 mineral assemblages observed.

AB - The redox conditions (fO2-fS2) of seafloor hydrothermal fluids were calculated from dissolved H2 and H2S concentrations at conditions of 300 and 350 °C, 71–409 bars, and seawater salinity. The results were compared with fO2-fS2 conditions estimated from black smoker mineralogy as reported by previous studies and our own investigations for various geological settings, including the Okinawa Trough (sediment-rich Hakurei and sediment-poor Jade fields), the Manus back-arc basin (felsic-hosted PACMANUS and basalt-hosted Vienna Woods fields), and the Central Indian Ridge (mafic/ultramafic-hosted Kairei and basalt-hosted Edmond fields). In most cases, the calculated fluid fO2-fS2 conditions agree well with estimates from primary mineral assemblages and FeS contents in sphalerite/wurtzite. This correlation suggests that the redox states of sulfide mineralization in chimneys typically reflect dissolved H2 and H2S concentrations in vent fluids. It should be noted that variable H2 concentrations in vent fluids (0.01–19 mmol/kg) dominantly control not only fluid fO2 but also fS2, whereas the more uniform H2S concentrations (1–20 mmol/kg) have less of an influence on fluid fS2. Fluid-sediment interaction elevates H2 concentrations to over 1 mmol/kg, which sufficiently lowers fO2-fS2 to the pyrrhotite stability field; however, low H2S concentrations do not necessarily account for low fS2. Calculations for the H2-poor (≤ 0.1 mmol/kg) and H2S-rich (~ 10 mmol/kg) fluids in some felsic-hosted arc-backarc systems indicate relatively high fO2-fS2 states consistent with the bornite-pyrite-chalcopyrite assemblages. These redox conditions result from a combination of fluid-mineral equilibria at relatively oxidizing conditions ± elevated H2S concentrations from magmatic degassing. Redox calculations at 350 °C indicate that neither pyrite nor pyrrhotite is stable in the initial hot fluids of the TAG and ultramafic-hosted Mid-Atlantic Ridge systems due to the low H2S concentrations. With cooling of these fluids, either conductively or by interacting with seawater, higher fS2 and fO2 result and Fe-sulfides are stable, in agreement with the higher-fO2-fS2 mineral assemblages observed.

KW - Fluid-sediment interaction

KW - Magmatic volatile

KW - Phase separation

KW - Redox state

KW - Seafloor hydrothermal fluid

KW - Sulfide mineralization

UR - http://www.scopus.com/inward/record.url?scp=85009493304&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85009493304&partnerID=8YFLogxK

U2 - 10.1016/j.chemgeo.2017.01.001

DO - 10.1016/j.chemgeo.2017.01.001

M3 - Article

VL - 451

SP - 25

EP - 37

JO - Chemical Geology

JF - Chemical Geology

SN - 0009-2541

ER -