Rapid on-machine measurement of surface finish in repeated cylindrical grinding cycles

Kazuhito Oohashi, K. Tan, T. Ashida, S. Tsukamoto

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

The surface finish is one of important evaluation items of grinding results as well as the form and size accuracy or the surface quality in grinding. The surface finish of the ground surface has never been measured after each grinding cycle because the measurement of the surface finish needs relatively a long duration by existing surface roughness testers and applications of surface roughness tester in each grinding cycle would affect mass-production processes. We propose a rapid on-machine measurement technique of the surface finish, which can check the surface finish of cylindrical workpieces rotating on cylindrical grinding machines in a split second just after each grinding cycle, and the usefulness without hampering mass-production grinding processes is shown in this study.

Original languageEnglish
Title of host publicationConference Proceedings - 14th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2014
Publishereuspen
Pages311-314
Number of pages4
Volume2
ISBN (Print)9780956679031
Publication statusPublished - 2014
Event14th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2014 - Dubrovnik, Croatia
Duration: Jun 2 2014Jun 6 2014

Other

Other14th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2014
CountryCroatia
CityDubrovnik
Period6/2/146/6/14

Fingerprint

grinding
cycles
test equipment
Surface roughness
surface roughness
grinding machines
Grinding machines
Surface properties
evaluation

Keywords

  • Cylindrical grinding
  • On-machine measurement
  • Surface finish

ASJC Scopus subject areas

  • Industrial and Manufacturing Engineering
  • Mechanical Engineering
  • Materials Science(all)
  • Instrumentation
  • Environmental Engineering

Cite this

Oohashi, K., Tan, K., Ashida, T., & Tsukamoto, S. (2014). Rapid on-machine measurement of surface finish in repeated cylindrical grinding cycles. In Conference Proceedings - 14th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2014 (Vol. 2, pp. 311-314). euspen.

Rapid on-machine measurement of surface finish in repeated cylindrical grinding cycles. / Oohashi, Kazuhito; Tan, K.; Ashida, T.; Tsukamoto, S.

Conference Proceedings - 14th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2014. Vol. 2 euspen, 2014. p. 311-314.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Oohashi, K, Tan, K, Ashida, T & Tsukamoto, S 2014, Rapid on-machine measurement of surface finish in repeated cylindrical grinding cycles. in Conference Proceedings - 14th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2014. vol. 2, euspen, pp. 311-314, 14th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2014, Dubrovnik, Croatia, 6/2/14.
Oohashi K, Tan K, Ashida T, Tsukamoto S. Rapid on-machine measurement of surface finish in repeated cylindrical grinding cycles. In Conference Proceedings - 14th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2014. Vol. 2. euspen. 2014. p. 311-314
Oohashi, Kazuhito ; Tan, K. ; Ashida, T. ; Tsukamoto, S. / Rapid on-machine measurement of surface finish in repeated cylindrical grinding cycles. Conference Proceedings - 14th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2014. Vol. 2 euspen, 2014. pp. 311-314
@inproceedings{03c558368477436b8f70a6998acde57d,
title = "Rapid on-machine measurement of surface finish in repeated cylindrical grinding cycles",
abstract = "The surface finish is one of important evaluation items of grinding results as well as the form and size accuracy or the surface quality in grinding. The surface finish of the ground surface has never been measured after each grinding cycle because the measurement of the surface finish needs relatively a long duration by existing surface roughness testers and applications of surface roughness tester in each grinding cycle would affect mass-production processes. We propose a rapid on-machine measurement technique of the surface finish, which can check the surface finish of cylindrical workpieces rotating on cylindrical grinding machines in a split second just after each grinding cycle, and the usefulness without hampering mass-production grinding processes is shown in this study.",
keywords = "Cylindrical grinding, On-machine measurement, Surface finish",
author = "Kazuhito Oohashi and K. Tan and T. Ashida and S. Tsukamoto",
year = "2014",
language = "English",
isbn = "9780956679031",
volume = "2",
pages = "311--314",
booktitle = "Conference Proceedings - 14th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2014",
publisher = "euspen",

}

TY - GEN

T1 - Rapid on-machine measurement of surface finish in repeated cylindrical grinding cycles

AU - Oohashi, Kazuhito

AU - Tan, K.

AU - Ashida, T.

AU - Tsukamoto, S.

PY - 2014

Y1 - 2014

N2 - The surface finish is one of important evaluation items of grinding results as well as the form and size accuracy or the surface quality in grinding. The surface finish of the ground surface has never been measured after each grinding cycle because the measurement of the surface finish needs relatively a long duration by existing surface roughness testers and applications of surface roughness tester in each grinding cycle would affect mass-production processes. We propose a rapid on-machine measurement technique of the surface finish, which can check the surface finish of cylindrical workpieces rotating on cylindrical grinding machines in a split second just after each grinding cycle, and the usefulness without hampering mass-production grinding processes is shown in this study.

AB - The surface finish is one of important evaluation items of grinding results as well as the form and size accuracy or the surface quality in grinding. The surface finish of the ground surface has never been measured after each grinding cycle because the measurement of the surface finish needs relatively a long duration by existing surface roughness testers and applications of surface roughness tester in each grinding cycle would affect mass-production processes. We propose a rapid on-machine measurement technique of the surface finish, which can check the surface finish of cylindrical workpieces rotating on cylindrical grinding machines in a split second just after each grinding cycle, and the usefulness without hampering mass-production grinding processes is shown in this study.

KW - Cylindrical grinding

KW - On-machine measurement

KW - Surface finish

UR - http://www.scopus.com/inward/record.url?scp=84923204616&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84923204616&partnerID=8YFLogxK

M3 - Conference contribution

SN - 9780956679031

VL - 2

SP - 311

EP - 314

BT - Conference Proceedings - 14th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2014

PB - euspen

ER -