Preparation of zeolite-coated cordierite honeycombs prepared by an in situ crystallization method

Kiyoshi Okada, Yoshikazu Kameshima, Chengala D. Madhusoodana, Rathindra N. Das

Research output: Contribution to journalArticle

23 Citations (Scopus)

Abstract

Zeolite thin films were prepared on cordierite (Mg2Al 4Si5O18) honeycomb substrates by in situ crystallization using soft hydrothermal conditions. The synthesized zeolite films (zeolite A and ZSM-5) were characterized by XRD, FTIR, SEM, NH 3-TPD, and Ns2 and propane gas adsorption. Zeolite-A films were prepared by dip-coating on a cordierite substrate in a precursor of molar composition of Na2O:Al2O3: SiO2: H2O=4:1:2:100 and heating in an autoclave at 80 °C for 6-10 h. The resultant zeolite-A films consisted of cubic crystals about 2-3 μm in size, achieving a thickness of 20 μm after re-coating. ZSM-5 films were similarly formed using a microporous silica precursor obtained by selective leaching of metakaolinite with tetrapropylammonium hydroxide (TPAOH) as the templating agent. The molar composition of the precursor was NaOH:microporous silica:TPAOH:H2O=1:10:1:200. The dipped substrate covered with the wet precursor gel was heated in an autoclave at 150 °C for 24 h. The resultant films were composed of short prismatic 2-rich interfacial layer between the substrate and zeolite film increased the amount of zeolite formed and the physical adsorption but decreased the solid acidity and amount of chemisorption.

Original languageEnglish
Pages (from-to)479-484
Number of pages6
JournalScience and Technology of Advanced Materials
Volume5
Issue number4
DOIs
Publication statusPublished - Jul 2004
Externally publishedYes

Fingerprint

Zeolites
Crystallization
Autoclaves
Substrates
Silicon Dioxide
Silica
Coatings
Gas adsorption
Propane
Temperature programmed desorption
Chemisorption
Chemical analysis
Acidity
Leaching
cordierite
Gels
Heating
Adsorption
Thin films
Crystals

Keywords

  • Hydrothermal treatment
  • In situ crystallization
  • Microstructure
  • Porous properties
  • Zeolite films

ASJC Scopus subject areas

  • Materials Science(all)

Cite this

Preparation of zeolite-coated cordierite honeycombs prepared by an in situ crystallization method. / Okada, Kiyoshi; Kameshima, Yoshikazu; Madhusoodana, Chengala D.; Das, Rathindra N.

In: Science and Technology of Advanced Materials, Vol. 5, No. 4, 07.2004, p. 479-484.

Research output: Contribution to journalArticle

@article{f867eeb3ba844105bb355b6bae7f4adb,
title = "Preparation of zeolite-coated cordierite honeycombs prepared by an in situ crystallization method",
abstract = "Zeolite thin films were prepared on cordierite (Mg2Al 4Si5O18) honeycomb substrates by in situ crystallization using soft hydrothermal conditions. The synthesized zeolite films (zeolite A and ZSM-5) were characterized by XRD, FTIR, SEM, NH 3-TPD, and Ns2 and propane gas adsorption. Zeolite-A films were prepared by dip-coating on a cordierite substrate in a precursor of molar composition of Na2O:Al2O3: SiO2: H2O=4:1:2:100 and heating in an autoclave at 80 °C for 6-10 h. The resultant zeolite-A films consisted of cubic crystals about 2-3 μm in size, achieving a thickness of 20 μm after re-coating. ZSM-5 films were similarly formed using a microporous silica precursor obtained by selective leaching of metakaolinite with tetrapropylammonium hydroxide (TPAOH) as the templating agent. The molar composition of the precursor was NaOH:microporous silica:TPAOH:H2O=1:10:1:200. The dipped substrate covered with the wet precursor gel was heated in an autoclave at 150 °C for 24 h. The resultant films were composed of short prismatic 2-rich interfacial layer between the substrate and zeolite film increased the amount of zeolite formed and the physical adsorption but decreased the solid acidity and amount of chemisorption.",
keywords = "Hydrothermal treatment, In situ crystallization, Microstructure, Porous properties, Zeolite films",
author = "Kiyoshi Okada and Yoshikazu Kameshima and Madhusoodana, {Chengala D.} and Das, {Rathindra N.}",
year = "2004",
month = "7",
doi = "10.1016/j.stam.2004.03.001",
language = "English",
volume = "5",
pages = "479--484",
journal = "Science and Technology of Advanced Materials",
issn = "1468-6996",
publisher = "IOP Publishing Ltd.",
number = "4",

}

TY - JOUR

T1 - Preparation of zeolite-coated cordierite honeycombs prepared by an in situ crystallization method

AU - Okada, Kiyoshi

AU - Kameshima, Yoshikazu

AU - Madhusoodana, Chengala D.

AU - Das, Rathindra N.

PY - 2004/7

Y1 - 2004/7

N2 - Zeolite thin films were prepared on cordierite (Mg2Al 4Si5O18) honeycomb substrates by in situ crystallization using soft hydrothermal conditions. The synthesized zeolite films (zeolite A and ZSM-5) were characterized by XRD, FTIR, SEM, NH 3-TPD, and Ns2 and propane gas adsorption. Zeolite-A films were prepared by dip-coating on a cordierite substrate in a precursor of molar composition of Na2O:Al2O3: SiO2: H2O=4:1:2:100 and heating in an autoclave at 80 °C for 6-10 h. The resultant zeolite-A films consisted of cubic crystals about 2-3 μm in size, achieving a thickness of 20 μm after re-coating. ZSM-5 films were similarly formed using a microporous silica precursor obtained by selective leaching of metakaolinite with tetrapropylammonium hydroxide (TPAOH) as the templating agent. The molar composition of the precursor was NaOH:microporous silica:TPAOH:H2O=1:10:1:200. The dipped substrate covered with the wet precursor gel was heated in an autoclave at 150 °C for 24 h. The resultant films were composed of short prismatic 2-rich interfacial layer between the substrate and zeolite film increased the amount of zeolite formed and the physical adsorption but decreased the solid acidity and amount of chemisorption.

AB - Zeolite thin films were prepared on cordierite (Mg2Al 4Si5O18) honeycomb substrates by in situ crystallization using soft hydrothermal conditions. The synthesized zeolite films (zeolite A and ZSM-5) were characterized by XRD, FTIR, SEM, NH 3-TPD, and Ns2 and propane gas adsorption. Zeolite-A films were prepared by dip-coating on a cordierite substrate in a precursor of molar composition of Na2O:Al2O3: SiO2: H2O=4:1:2:100 and heating in an autoclave at 80 °C for 6-10 h. The resultant zeolite-A films consisted of cubic crystals about 2-3 μm in size, achieving a thickness of 20 μm after re-coating. ZSM-5 films were similarly formed using a microporous silica precursor obtained by selective leaching of metakaolinite with tetrapropylammonium hydroxide (TPAOH) as the templating agent. The molar composition of the precursor was NaOH:microporous silica:TPAOH:H2O=1:10:1:200. The dipped substrate covered with the wet precursor gel was heated in an autoclave at 150 °C for 24 h. The resultant films were composed of short prismatic 2-rich interfacial layer between the substrate and zeolite film increased the amount of zeolite formed and the physical adsorption but decreased the solid acidity and amount of chemisorption.

KW - Hydrothermal treatment

KW - In situ crystallization

KW - Microstructure

KW - Porous properties

KW - Zeolite films

UR - http://www.scopus.com/inward/record.url?scp=3042692193&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=3042692193&partnerID=8YFLogxK

U2 - 10.1016/j.stam.2004.03.001

DO - 10.1016/j.stam.2004.03.001

M3 - Article

AN - SCOPUS:3042692193

VL - 5

SP - 479

EP - 484

JO - Science and Technology of Advanced Materials

JF - Science and Technology of Advanced Materials

SN - 1468-6996

IS - 4

ER -