Preparation of Ca-loaded charcoal from wood waste and their absorption properties for hydrogen chloride gas

Riei Yokoyama, Satoshi Hayashi, Makoto Nakanishi, Jun Takada

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

Carbonization of wood waste contributes to prevention of global warming through carbon fixation and the obtained charcoal can be effectively used for environmental purification. However it is not expected the charcoal obtained by mere carbonization has various uses. In this study, thermal decomposition of chips of Japanese cypress soaked in Ca solution and absorption properties of obtained charcoal for hydrogen chloride gas were investigated to develop a novel functional charcoal. Ca(OH)2 was used as Ca source due to less environmental load and easy handling. Ca-impregnated chips were heat-treated in an electric muffle furnace at temperatures between 600 and 900°C. The fine calcite crystals were dispersed homogeneously on the surface of tracheids in the heat-treated samples. The measurements of absorption properties for hydrogen chloride gas revealed that the absorptive ability and durability of these samples were higher than those of the conventional materials. From these results, it was suggested that an acidic gas absorption material with high reactivity could be prepared simply by the thermal decomposition of wood waste soaked in Ca solution.

Original languageEnglish
Pages (from-to)699-704
Number of pages6
JournalFuntai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy
Volume54
Issue number10
DOIs
Publication statusPublished - Oct 2007

Fingerprint

Wood wastes
Charcoal
Hydrochloric Acid
Gases
Hydrogen
Carbonization
Pyrolysis
Gas absorption
Electric furnaces
Calcium Carbonate
Calcite
Global warming
Purification
Durability
Carbon
Crystals
Temperature
Hot Temperature

Keywords

  • Calcium impregnation
  • Charcoal
  • Fine particle dispersion
  • Hydrogen chloride gas absorption
  • Wood waste

ASJC Scopus subject areas

  • Mechanical Engineering
  • Metals and Alloys

Cite this

Preparation of Ca-loaded charcoal from wood waste and their absorption properties for hydrogen chloride gas. / Yokoyama, Riei; Hayashi, Satoshi; Nakanishi, Makoto; Takada, Jun.

In: Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy, Vol. 54, No. 10, 10.2007, p. 699-704.

Research output: Contribution to journalArticle

@article{a5269f482a124c8a96db14abab97e30b,
title = "Preparation of Ca-loaded charcoal from wood waste and their absorption properties for hydrogen chloride gas",
abstract = "Carbonization of wood waste contributes to prevention of global warming through carbon fixation and the obtained charcoal can be effectively used for environmental purification. However it is not expected the charcoal obtained by mere carbonization has various uses. In this study, thermal decomposition of chips of Japanese cypress soaked in Ca solution and absorption properties of obtained charcoal for hydrogen chloride gas were investigated to develop a novel functional charcoal. Ca(OH)2 was used as Ca source due to less environmental load and easy handling. Ca-impregnated chips were heat-treated in an electric muffle furnace at temperatures between 600 and 900°C. The fine calcite crystals were dispersed homogeneously on the surface of tracheids in the heat-treated samples. The measurements of absorption properties for hydrogen chloride gas revealed that the absorptive ability and durability of these samples were higher than those of the conventional materials. From these results, it was suggested that an acidic gas absorption material with high reactivity could be prepared simply by the thermal decomposition of wood waste soaked in Ca solution.",
keywords = "Calcium impregnation, Charcoal, Fine particle dispersion, Hydrogen chloride gas absorption, Wood waste",
author = "Riei Yokoyama and Satoshi Hayashi and Makoto Nakanishi and Jun Takada",
year = "2007",
month = "10",
doi = "10.2497/jjspm.54.699",
language = "English",
volume = "54",
pages = "699--704",
journal = "Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy",
issn = "0532-8799",
publisher = "Funtai Funamtsu Yakin Kyokai/Japan Soc. of Powder Metallurgy",
number = "10",

}

TY - JOUR

T1 - Preparation of Ca-loaded charcoal from wood waste and their absorption properties for hydrogen chloride gas

AU - Yokoyama, Riei

AU - Hayashi, Satoshi

AU - Nakanishi, Makoto

AU - Takada, Jun

PY - 2007/10

Y1 - 2007/10

N2 - Carbonization of wood waste contributes to prevention of global warming through carbon fixation and the obtained charcoal can be effectively used for environmental purification. However it is not expected the charcoal obtained by mere carbonization has various uses. In this study, thermal decomposition of chips of Japanese cypress soaked in Ca solution and absorption properties of obtained charcoal for hydrogen chloride gas were investigated to develop a novel functional charcoal. Ca(OH)2 was used as Ca source due to less environmental load and easy handling. Ca-impregnated chips were heat-treated in an electric muffle furnace at temperatures between 600 and 900°C. The fine calcite crystals were dispersed homogeneously on the surface of tracheids in the heat-treated samples. The measurements of absorption properties for hydrogen chloride gas revealed that the absorptive ability and durability of these samples were higher than those of the conventional materials. From these results, it was suggested that an acidic gas absorption material with high reactivity could be prepared simply by the thermal decomposition of wood waste soaked in Ca solution.

AB - Carbonization of wood waste contributes to prevention of global warming through carbon fixation and the obtained charcoal can be effectively used for environmental purification. However it is not expected the charcoal obtained by mere carbonization has various uses. In this study, thermal decomposition of chips of Japanese cypress soaked in Ca solution and absorption properties of obtained charcoal for hydrogen chloride gas were investigated to develop a novel functional charcoal. Ca(OH)2 was used as Ca source due to less environmental load and easy handling. Ca-impregnated chips were heat-treated in an electric muffle furnace at temperatures between 600 and 900°C. The fine calcite crystals were dispersed homogeneously on the surface of tracheids in the heat-treated samples. The measurements of absorption properties for hydrogen chloride gas revealed that the absorptive ability and durability of these samples were higher than those of the conventional materials. From these results, it was suggested that an acidic gas absorption material with high reactivity could be prepared simply by the thermal decomposition of wood waste soaked in Ca solution.

KW - Calcium impregnation

KW - Charcoal

KW - Fine particle dispersion

KW - Hydrogen chloride gas absorption

KW - Wood waste

UR - http://www.scopus.com/inward/record.url?scp=38049119966&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=38049119966&partnerID=8YFLogxK

U2 - 10.2497/jjspm.54.699

DO - 10.2497/jjspm.54.699

M3 - Article

AN - SCOPUS:38049119966

VL - 54

SP - 699

EP - 704

JO - Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy

JF - Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy

SN - 0532-8799

IS - 10

ER -