Abstract
TiO2 (anatase) coating was prepared on stainless mesh by electrophoretic (EPD) process utilizing an isopropyl alcohol (IPA)-based suspension with submicron TiO2 powder. When the deposition time was 30 s, a smooth thin coating was obtained. It remained crack-free even after sintering. Coating surface morphology was roughened by UV pre-illumination of the suspension. Photocatalytic decomposition of IPA to acetone and resultant electrochemical reaction at cathode during EPD provides heterogeneous deposition.
| Original language | English |
|---|---|
| Pages (from-to) | 1335-1344 |
| Number of pages | 10 |
| Journal | Materials Research Bulletin |
| Volume | 40 |
| Issue number | 8 |
| DOIs | |
| Publication status | Published - Aug 11 2005 |
| Externally published | Yes |
Fingerprint
Keywords
- A. Ceramics
- A. Surfaces
- B. Electrochemical properties
- D. Microstructure
ASJC Scopus subject areas
- Ceramics and Composites
- Materials Chemistry
Cite this
Preparation of a crack-free rough titania coating on stainless steel mesh by electrophoretic deposition. / Yanagida, Sayaka; Nakajima, Akira; Kameshima, Yoshikazu; Yoshida, Naoya; Watanabe, Toshiya; Okada, Kiyoshi.
In: Materials Research Bulletin, Vol. 40, No. 8, 11.08.2005, p. 1335-1344.Research output: Contribution to journal › Article
}
TY - JOUR
T1 - Preparation of a crack-free rough titania coating on stainless steel mesh by electrophoretic deposition
AU - Yanagida, Sayaka
AU - Nakajima, Akira
AU - Kameshima, Yoshikazu
AU - Yoshida, Naoya
AU - Watanabe, Toshiya
AU - Okada, Kiyoshi
PY - 2005/8/11
Y1 - 2005/8/11
N2 - TiO2 (anatase) coating was prepared on stainless mesh by electrophoretic (EPD) process utilizing an isopropyl alcohol (IPA)-based suspension with submicron TiO2 powder. When the deposition time was 30 s, a smooth thin coating was obtained. It remained crack-free even after sintering. Coating surface morphology was roughened by UV pre-illumination of the suspension. Photocatalytic decomposition of IPA to acetone and resultant electrochemical reaction at cathode during EPD provides heterogeneous deposition.
AB - TiO2 (anatase) coating was prepared on stainless mesh by electrophoretic (EPD) process utilizing an isopropyl alcohol (IPA)-based suspension with submicron TiO2 powder. When the deposition time was 30 s, a smooth thin coating was obtained. It remained crack-free even after sintering. Coating surface morphology was roughened by UV pre-illumination of the suspension. Photocatalytic decomposition of IPA to acetone and resultant electrochemical reaction at cathode during EPD provides heterogeneous deposition.
KW - A. Ceramics
KW - A. Surfaces
KW - B. Electrochemical properties
KW - D. Microstructure
UR - http://www.scopus.com/inward/record.url?scp=21744436521&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=21744436521&partnerID=8YFLogxK
U2 - 10.1016/j.materresbull.2005.04.030
DO - 10.1016/j.materresbull.2005.04.030
M3 - Article
VL - 40
SP - 1335
EP - 1344
JO - Materials Research Bulletin
JF - Materials Research Bulletin
SN - 0025-5408
IS - 8
ER -