Practical simulator development for power loss performance analysis of soft switching and hard switching PWM inverters using IGBTs

Eiji Hiraki, Mutsuo Nakaoka

Research output: Contribution to conferencePaper

4 Citations (Scopus)

Abstract

This paper deals with a feasible power loss analysis simulator which can actually estimate the total power losses of three phase voltage source soft-switching inverter as well as hard-switching inverter. To estimate switching power losses and conduction power losses of switching semiconductor power devices; IGBTs, incorporated into the inverters and converters, this practical simulator is based on making use of feasible switching power loss data-based table and conduction power loss table which are accumulated from the measured transient switching operation and periodic steady-state conduction voltage and current operating waveforms of semiconductor switching power devices used in the power converters. The effectiveness of feasible simulation technique and power loss evaluations for power electronic conversion circuits and systems has been confirmed on the basis of simulation and experimental results under the conditions of soft switching and hard switching PWM schemes.

Original languageEnglish
Pages876-881
Number of pages6
Publication statusPublished - Dec 1 2001
Externally publishedYes
Event27th Annual Conference of the IEEE Industrial Electronics Society IECON'2001 - Denver, CO, United States
Duration: Nov 29 2001Dec 2 2001

Other

Other27th Annual Conference of the IEEE Industrial Electronics Society IECON'2001
CountryUnited States
CityDenver, CO
Period11/29/0112/2/01

Keywords

  • Active quasi-resonant snubbers
  • Conduction power losses
  • Hard switching inverter
  • Power loss simulator
  • Soft switching inverter
  • Switching power losses

ASJC Scopus subject areas

  • Control and Systems Engineering
  • Electrical and Electronic Engineering

Fingerprint Dive into the research topics of 'Practical simulator development for power loss performance analysis of soft switching and hard switching PWM inverters using IGBTs'. Together they form a unique fingerprint.

  • Cite this

    Hiraki, E., & Nakaoka, M. (2001). Practical simulator development for power loss performance analysis of soft switching and hard switching PWM inverters using IGBTs. 876-881. Paper presented at 27th Annual Conference of the IEEE Industrial Electronics Society IECON'2001, Denver, CO, United States.