Photocarrier injection to organic compounds

Jun Ichi Yamaura, Yuji Muraoka, Takaki Muramatsu, Touru Yamauchi, Zenji Hiroi

Research output: Contribution to journalArticlepeer-review

1 Citation (Scopus)

Abstract

Photocarrier injection (PCI) is efficient method of the carrier control for the inorganic thin films, where the photo-excited holes in the wide-gap semiconductor under the UV light irradiation are injected to the film through the interface. We examine the PCI method to various organic films provided on the inorganic wide-gap semiconductor substrate. We prepared organic films deposited on the surface of a Nb-doped TiO2 (SrTiO3) single crystal substrate, possessing a band gap of 3.0 eV (3.2 eV), by using casting or vacuum evaporation. Fabricated organic films were polythiophene (1), Ni phthalocyanine (2), polyaniline (3), C60 (4), and DNA (Herring Sperm) (5) on Nb-doped TiO2 substrate. We determined the carrier injection to the organic films from the across-plane open-circuit voltage measurement under the UV light. The values of the surface density of the injected holes to organic films are estimated at 1.4 × 1013 cm-2 (1), 4.2 × 1012 cm-2 (2), 6.9 × 1012 cm-2 (3), 1.5 × 1011 cm -2 (4), and 8.1 × 1012 cm-2 (5) at the irradiance of 10 mW/cm2. Moreover, we also measure the photovoltages for polythiophene films provided on Nb-doped SrTiO3 substrates with various Nb concentrations.

Original languageEnglish
Pages (from-to)385-388
Number of pages4
JournalSynthetic Metals
Volume152
Issue number1-3
DOIs
Publication statusPublished - Sep 20 2005
Externally publishedYes

Keywords

  • Other heterostructures
  • Photoconductivity
  • Polythiophene and derivatives
  • Semiconducting films

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering
  • Metals and Alloys
  • Materials Chemistry

Fingerprint Dive into the research topics of 'Photocarrier injection to organic compounds'. Together they form a unique fingerprint.

Cite this