Nonmagnetic indenter-type high-pressure cell for magnetic measurements

T. C. Kobayashi; H. Hidaka; H. Kotegawa; K. Fujiwara; M. I. Eremets

doi:10.1063/1.2459512

Nonmagnetic indenter-type high-pressure cell for magnetic measurements

T. C. Kobayashi, H. Hidaka, H. Kotegawa, K. Fujiwara, M. I. Eremets

Research output: Contribution to journal › Article › peer-review

84 Citations (Scopus)

Abstract

An indenter-type high-pressure cell has been developed for electric and magnetic measurements in low-temperature and high-magnetic-field environments. The maximum pressure achieved at low temperatures is more than 4.5 GPa, which is higher than that of a conventional piston-cylinder cell. The typical sample space at maximum pressure is 1.6 mm in diameter and approximately 0.7 mm in depth, and magnetic measurements such as ac-susceptibility and nuclear magnetic resonance can be performed using a miniature coil. All the components of the indenter cell are made of nonmagnetic materials that have enough thermal conductivity for low-temperature experiments using a He3 He4 dilution refrigerator. Another indenter-type cell designed for a commercial superconducting quantum interference device magnetometer is also reported.

Original language	English
Article number	023909
Journal	Review of Scientific Instruments
Volume	78
Issue number	2
DOIs	https://doi.org/10.1063/1.2459512
Publication status	Published - 2007

ASJC Scopus subject areas

Instrumentation

Access to Document

10.1063/1.2459512

Cite this

@article{6eb039c93c574322870c9a134cfa6f5e,

title = "Nonmagnetic indenter-type high-pressure cell for magnetic measurements",

abstract = "An indenter-type high-pressure cell has been developed for electric and magnetic measurements in low-temperature and high-magnetic-field environments. The maximum pressure achieved at low temperatures is more than 4.5 GPa, which is higher than that of a conventional piston-cylinder cell. The typical sample space at maximum pressure is 1.6 mm in diameter and approximately 0.7 mm in depth, and magnetic measurements such as ac-susceptibility and nuclear magnetic resonance can be performed using a miniature coil. All the components of the indenter cell are made of nonmagnetic materials that have enough thermal conductivity for low-temperature experiments using a He3 He4 dilution refrigerator. Another indenter-type cell designed for a commercial superconducting quantum interference device magnetometer is also reported.",

author = "Kobayashi, {T. C.} and H. Hidaka and H. Kotegawa and K. Fujiwara and Eremets, {M. I.}",

note = "Funding Information: This work was partially supported by a Grant-in-Aid for Scientific Research (15340119) from the Japan Society for the Promotion of Science.",

year = "2007",

doi = "10.1063/1.2459512",

language = "English",

volume = "78",

journal = "Review of Scientific Instruments",

issn = "0034-6748",

publisher = "American Institute of Physics Publising LLC",

number = "2",

}

TY - JOUR

T1 - Nonmagnetic indenter-type high-pressure cell for magnetic measurements

AU - Kobayashi, T. C.

AU - Hidaka, H.

AU - Kotegawa, H.

AU - Fujiwara, K.

AU - Eremets, M. I.

N1 - Funding Information: This work was partially supported by a Grant-in-Aid for Scientific Research (15340119) from the Japan Society for the Promotion of Science.

PY - 2007

Y1 - 2007

N2 - An indenter-type high-pressure cell has been developed for electric and magnetic measurements in low-temperature and high-magnetic-field environments. The maximum pressure achieved at low temperatures is more than 4.5 GPa, which is higher than that of a conventional piston-cylinder cell. The typical sample space at maximum pressure is 1.6 mm in diameter and approximately 0.7 mm in depth, and magnetic measurements such as ac-susceptibility and nuclear magnetic resonance can be performed using a miniature coil. All the components of the indenter cell are made of nonmagnetic materials that have enough thermal conductivity for low-temperature experiments using a He3 He4 dilution refrigerator. Another indenter-type cell designed for a commercial superconducting quantum interference device magnetometer is also reported.

AB - An indenter-type high-pressure cell has been developed for electric and magnetic measurements in low-temperature and high-magnetic-field environments. The maximum pressure achieved at low temperatures is more than 4.5 GPa, which is higher than that of a conventional piston-cylinder cell. The typical sample space at maximum pressure is 1.6 mm in diameter and approximately 0.7 mm in depth, and magnetic measurements such as ac-susceptibility and nuclear magnetic resonance can be performed using a miniature coil. All the components of the indenter cell are made of nonmagnetic materials that have enough thermal conductivity for low-temperature experiments using a He3 He4 dilution refrigerator. Another indenter-type cell designed for a commercial superconducting quantum interference device magnetometer is also reported.

UR - http://www.scopus.com/inward/record.url?scp=33847618736&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=33847618736&partnerID=8YFLogxK

U2 - 10.1063/1.2459512

DO - 10.1063/1.2459512

M3 - Article

AN - SCOPUS:33847618736

VL - 78

JO - Review of Scientific Instruments

JF - Review of Scientific Instruments

SN - 0034-6748

IS - 2

M1 - 023909

ER -

Nonmagnetic indenter-type high-pressure cell for magnetic measurements

Abstract

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this