Morphology control of phase-separation texture by elongation of two-liquids immiscible melt in Fe3O4-SiO2 system

Atsuo Yasumori, Akio Koike, Yoshikazu Kameshima, Kiyoshi Okada, Satoru Inoue

Research output: Contribution to journalArticle

9 Citations (Scopus)

Abstract

The existence of a liquid-liquid miscibility gap in Fe3O4-SiO2 system has been reported. In this study, phase-separated glasses of 5 Fe3O4·95SiO2 (mol%) were prepared by melting sintered rods of the same composition at 1800°C (in immiscible region) using an infrared imaging furnace and, subsequently, quenching with elongation of the melts at a constant rate. The glass quenched without elongation exhibited a binodal type phase separation texture consisting of discrete spherical Fe3O4-rich particles. On the contrary, in the sample quenched with elongation, Fe3O4-rich particles were stretched and oriented along the direction of elongation. The length of the stretched particles was proportional to the elongation distance and was not independent of the elongation rate within short elongation distance. However, the stretching of the particles was less pronounced for the long elongation ranges. This suggests that the spherical particles grown by phase separation in the binodal region, were stretched by viscous flow in the early stage of elongation and the stretching in the latter stage was reduced by restoration due to viscoelastic behavior and/or to a steep increase of viscosity. The deformation and orientation of phase separation texture could be achieved in this process, though this deformation proceeded under non-equilibrium conditions. Therefore, the operated elongation process of two-liquid immiscible melts may enable one to fabricate high-functional composite materials owing to morphology control of phase separation texture.

Original languageEnglish
Pages (from-to)813-817
Number of pages5
JournalNippon Seramikkusu Kyokai Gakujutsu Ronbunshi/Journal of the Ceramic Society of Japan
Volume108
Issue number9
Publication statusPublished - 2000
Externally publishedYes

Fingerprint

Phase separation
elongation
Elongation
textures
Textures
Liquids
liquids
Stretching
Glass
nonequilibrium conditions
miscibility gap
Functional materials
glass
Infrared imaging
viscous flow
Viscous flow
restoration
Restoration
furnaces
Quenching

Keywords

  • Elongation
  • FeO-SiO system
  • Immiscible melt
  • Orientation
  • Phase separation

ASJC Scopus subject areas

  • Ceramics and Composites

Cite this

Morphology control of phase-separation texture by elongation of two-liquids immiscible melt in Fe3O4-SiO2 system. / Yasumori, Atsuo; Koike, Akio; Kameshima, Yoshikazu; Okada, Kiyoshi; Inoue, Satoru.

In: Nippon Seramikkusu Kyokai Gakujutsu Ronbunshi/Journal of the Ceramic Society of Japan, Vol. 108, No. 9, 2000, p. 813-817.

Research output: Contribution to journalArticle

@article{7bfe776f07dc4276bf6fd99e050fb8f2,
title = "Morphology control of phase-separation texture by elongation of two-liquids immiscible melt in Fe3O4-SiO2 system",
abstract = "The existence of a liquid-liquid miscibility gap in Fe3O4-SiO2 system has been reported. In this study, phase-separated glasses of 5 Fe3O4·95SiO2 (mol{\%}) were prepared by melting sintered rods of the same composition at 1800°C (in immiscible region) using an infrared imaging furnace and, subsequently, quenching with elongation of the melts at a constant rate. The glass quenched without elongation exhibited a binodal type phase separation texture consisting of discrete spherical Fe3O4-rich particles. On the contrary, in the sample quenched with elongation, Fe3O4-rich particles were stretched and oriented along the direction of elongation. The length of the stretched particles was proportional to the elongation distance and was not independent of the elongation rate within short elongation distance. However, the stretching of the particles was less pronounced for the long elongation ranges. This suggests that the spherical particles grown by phase separation in the binodal region, were stretched by viscous flow in the early stage of elongation and the stretching in the latter stage was reduced by restoration due to viscoelastic behavior and/or to a steep increase of viscosity. The deformation and orientation of phase separation texture could be achieved in this process, though this deformation proceeded under non-equilibrium conditions. Therefore, the operated elongation process of two-liquid immiscible melts may enable one to fabricate high-functional composite materials owing to morphology control of phase separation texture.",
keywords = "Elongation, FeO-SiO system, Immiscible melt, Orientation, Phase separation",
author = "Atsuo Yasumori and Akio Koike and Yoshikazu Kameshima and Kiyoshi Okada and Satoru Inoue",
year = "2000",
language = "English",
volume = "108",
pages = "813--817",
journal = "Nippon Seramikkusu Kyokai Gakujutsu Ronbunshi/Journal of the Ceramic Society of Japan",
issn = "1882-0743",
publisher = "Ceramic Society of Japan/Nippon Seramikkusu Kyokai",
number = "9",

}

TY - JOUR

T1 - Morphology control of phase-separation texture by elongation of two-liquids immiscible melt in Fe3O4-SiO2 system

AU - Yasumori, Atsuo

AU - Koike, Akio

AU - Kameshima, Yoshikazu

AU - Okada, Kiyoshi

AU - Inoue, Satoru

PY - 2000

Y1 - 2000

N2 - The existence of a liquid-liquid miscibility gap in Fe3O4-SiO2 system has been reported. In this study, phase-separated glasses of 5 Fe3O4·95SiO2 (mol%) were prepared by melting sintered rods of the same composition at 1800°C (in immiscible region) using an infrared imaging furnace and, subsequently, quenching with elongation of the melts at a constant rate. The glass quenched without elongation exhibited a binodal type phase separation texture consisting of discrete spherical Fe3O4-rich particles. On the contrary, in the sample quenched with elongation, Fe3O4-rich particles were stretched and oriented along the direction of elongation. The length of the stretched particles was proportional to the elongation distance and was not independent of the elongation rate within short elongation distance. However, the stretching of the particles was less pronounced for the long elongation ranges. This suggests that the spherical particles grown by phase separation in the binodal region, were stretched by viscous flow in the early stage of elongation and the stretching in the latter stage was reduced by restoration due to viscoelastic behavior and/or to a steep increase of viscosity. The deformation and orientation of phase separation texture could be achieved in this process, though this deformation proceeded under non-equilibrium conditions. Therefore, the operated elongation process of two-liquid immiscible melts may enable one to fabricate high-functional composite materials owing to morphology control of phase separation texture.

AB - The existence of a liquid-liquid miscibility gap in Fe3O4-SiO2 system has been reported. In this study, phase-separated glasses of 5 Fe3O4·95SiO2 (mol%) were prepared by melting sintered rods of the same composition at 1800°C (in immiscible region) using an infrared imaging furnace and, subsequently, quenching with elongation of the melts at a constant rate. The glass quenched without elongation exhibited a binodal type phase separation texture consisting of discrete spherical Fe3O4-rich particles. On the contrary, in the sample quenched with elongation, Fe3O4-rich particles were stretched and oriented along the direction of elongation. The length of the stretched particles was proportional to the elongation distance and was not independent of the elongation rate within short elongation distance. However, the stretching of the particles was less pronounced for the long elongation ranges. This suggests that the spherical particles grown by phase separation in the binodal region, were stretched by viscous flow in the early stage of elongation and the stretching in the latter stage was reduced by restoration due to viscoelastic behavior and/or to a steep increase of viscosity. The deformation and orientation of phase separation texture could be achieved in this process, though this deformation proceeded under non-equilibrium conditions. Therefore, the operated elongation process of two-liquid immiscible melts may enable one to fabricate high-functional composite materials owing to morphology control of phase separation texture.

KW - Elongation

KW - FeO-SiO system

KW - Immiscible melt

KW - Orientation

KW - Phase separation

UR - http://www.scopus.com/inward/record.url?scp=0034275297&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0034275297&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:0034275297

VL - 108

SP - 813

EP - 817

JO - Nippon Seramikkusu Kyokai Gakujutsu Ronbunshi/Journal of the Ceramic Society of Japan

JF - Nippon Seramikkusu Kyokai Gakujutsu Ronbunshi/Journal of the Ceramic Society of Japan

SN - 1882-0743

IS - 9

ER -