Microstructure of alloyed layer and nitriding process in foreign metals under arc sprayed Ti composite coating

Nobuaki Sakoda, Moritaka Hida, Yoshito Takemoto, Akira Sakakibara, Toshiro Tajiri

Research output: Contribution to journalArticlepeer-review

1 Citation (Scopus)

Abstract

We investigated the nitriding process and the microstructure of the alloyed layer between foreign metals under composite arc spraying using two different wire materials, Ti and the paired metal (Mo, Ni, Cu and Al). The Ti element in the composite coatings (Ti-Mo, Ti-Ni, Ti-Cu and Ti-Al) was of TiN and/or TiN0.3, and the oxide or nitride of the paired metal was not found in the coatings. An intermetallic compound (Ti2Al) in the Ti-Al coating was detected in the XRD pattern, but none was detected in the other coatings. It is considered that the reaction of Ti with foreign metal occurs only in the solidification process at the moment of droplet impact. The composite coatings were of very dense packing, and had the diffusion layer in the interface region between the foreign metals. The solute element, Ti in the composite coating Ti-Mo, reacted with nitrogen to form many micrograins of TiN0.3 within molten Mo during thermal spraying. In the other coatings (Ti-Ni, To-Cu and Ti-Al), eutectics were mainly identified, and the Ti nitride in the alloyed layer between foreign metals was only TiN0.3. In addition, the intermetallic compounds, which were not detected in the XRD pattern, were identified in the TEM observation.

Original languageEnglish
Pages (from-to)1304-1310
Number of pages7
JournalNippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals
Volume66
Issue number12
DOIs
Publication statusPublished - Dec 2002

Keywords

  • Arc spraying
  • Dispersion strengthening
  • Eutectic structure
  • Intermetallic compound
  • Nitriding process
  • Titanium composite coating

ASJC Scopus subject areas

  • Condensed Matter Physics
  • Mechanics of Materials
  • Metals and Alloys
  • Materials Chemistry

Fingerprint Dive into the research topics of 'Microstructure of alloyed layer and nitriding process in foreign metals under arc sprayed Ti composite coating'. Together they form a unique fingerprint.

Cite this