Microfluidic approach to the formation of internally porous polymer particles by solvent extraction

Takaichi Watanabe, Carlos G. Lopez, Jack F. Douglas, Tsutomu Ono, João T. Cabral

Research output: Contribution to journalArticle

28 Citations (Scopus)

Abstract

We report the controlled formation of internally porous polyelectrolyte particles with diameters ranging from tens to hundreds of micrometers through selective solvent extraction using microfluidics. Solvent-resistant microdevices, fabricated by frontal photopolymerization, encapsulate binary polymer (P)/solvent (S1) mixtures by a carrier solvent phase (C) to form plugs with well-defined radii and low polydispersity; the suspension is then brought into contact with a selective extraction solvent (S2) that is miscible with C and S1 but not P, leading to the extraction of S1 from the droplets. The ensuing phase inversion yields polymer capsules with a smooth surface but highly porous internal structure. Depending on the liquid extraction time scale, this stage can be carried out in situ, within the chip, or ex situ, in an external S2 bath. Bimodal polymer plugs are achieved using asymmetrically inverted T junctions. For this demonstration, we form sodium poly(styrenesulfonate) (P) particles using water (S1), hexadecane (C), and methyl ethyl ketone (S2). We measure droplet extraction rates as a function of drop size and polymer concentration and propose a simple scaling model to guide particle formation. We find that the extraction time required to form particles from liquid droplets does not depend on the initial polymer concentration but is rather proportional to the initial droplet size. The resulting particle size follows a linear relationship with the initial droplet size for all polymer concentrations, allowing for the precise control of particle size. The internal particle porous structure exhibits a polymer density gradient ranging from a dense surface skin toward an essentially hollow core. Average particle porosities between 10 and 50% are achieved by varying the initial droplet compositions up to 15 wt % polymer. Such particles have potential applications in functional, optical, and coating materials.

Original languageEnglish
Pages (from-to)2470-2479
Number of pages10
JournalLangmuir
Volume30
Issue number9
DOIs
Publication statusPublished - Mar 11 2014

Fingerprint

solvent extraction
Solvent extraction
Microfluidics
Polymers
polymers
plugs
Particle size
Photopolymerization
drop size
Liquids
Polydispersity
optical coatings
Polyelectrolytes
Ketones
optical materials
capsules
liquids
Capsules
ketones
Suspensions

ASJC Scopus subject areas

  • Electrochemistry
  • Condensed Matter Physics
  • Surfaces and Interfaces
  • Materials Science(all)
  • Spectroscopy

Cite this

Microfluidic approach to the formation of internally porous polymer particles by solvent extraction. / Watanabe, Takaichi; G. Lopez, Carlos; Douglas, Jack F.; Ono, Tsutomu; Cabral, João T.

In: Langmuir, Vol. 30, No. 9, 11.03.2014, p. 2470-2479.

Research output: Contribution to journalArticle

Watanabe, Takaichi ; G. Lopez, Carlos ; Douglas, Jack F. ; Ono, Tsutomu ; Cabral, João T. / Microfluidic approach to the formation of internally porous polymer particles by solvent extraction. In: Langmuir. 2014 ; Vol. 30, No. 9. pp. 2470-2479.
@article{844f95eaa1364d1398b7c6cb8a58e3ca,
title = "Microfluidic approach to the formation of internally porous polymer particles by solvent extraction",
abstract = "We report the controlled formation of internally porous polyelectrolyte particles with diameters ranging from tens to hundreds of micrometers through selective solvent extraction using microfluidics. Solvent-resistant microdevices, fabricated by frontal photopolymerization, encapsulate binary polymer (P)/solvent (S1) mixtures by a carrier solvent phase (C) to form plugs with well-defined radii and low polydispersity; the suspension is then brought into contact with a selective extraction solvent (S2) that is miscible with C and S1 but not P, leading to the extraction of S1 from the droplets. The ensuing phase inversion yields polymer capsules with a smooth surface but highly porous internal structure. Depending on the liquid extraction time scale, this stage can be carried out in situ, within the chip, or ex situ, in an external S2 bath. Bimodal polymer plugs are achieved using asymmetrically inverted T junctions. For this demonstration, we form sodium poly(styrenesulfonate) (P) particles using water (S1), hexadecane (C), and methyl ethyl ketone (S2). We measure droplet extraction rates as a function of drop size and polymer concentration and propose a simple scaling model to guide particle formation. We find that the extraction time required to form particles from liquid droplets does not depend on the initial polymer concentration but is rather proportional to the initial droplet size. The resulting particle size follows a linear relationship with the initial droplet size for all polymer concentrations, allowing for the precise control of particle size. The internal particle porous structure exhibits a polymer density gradient ranging from a dense surface skin toward an essentially hollow core. Average particle porosities between 10 and 50{\%} are achieved by varying the initial droplet compositions up to 15 wt {\%} polymer. Such particles have potential applications in functional, optical, and coating materials.",
author = "Takaichi Watanabe and {G. Lopez}, Carlos and Douglas, {Jack F.} and Tsutomu Ono and Cabral, {Jo{\~a}o T.}",
year = "2014",
month = "3",
day = "11",
doi = "10.1021/la404506b",
language = "English",
volume = "30",
pages = "2470--2479",
journal = "Langmuir",
issn = "0743-7463",
publisher = "American Chemical Society",
number = "9",

}

TY - JOUR

T1 - Microfluidic approach to the formation of internally porous polymer particles by solvent extraction

AU - Watanabe, Takaichi

AU - G. Lopez, Carlos

AU - Douglas, Jack F.

AU - Ono, Tsutomu

AU - Cabral, João T.

PY - 2014/3/11

Y1 - 2014/3/11

N2 - We report the controlled formation of internally porous polyelectrolyte particles with diameters ranging from tens to hundreds of micrometers through selective solvent extraction using microfluidics. Solvent-resistant microdevices, fabricated by frontal photopolymerization, encapsulate binary polymer (P)/solvent (S1) mixtures by a carrier solvent phase (C) to form plugs with well-defined radii and low polydispersity; the suspension is then brought into contact with a selective extraction solvent (S2) that is miscible with C and S1 but not P, leading to the extraction of S1 from the droplets. The ensuing phase inversion yields polymer capsules with a smooth surface but highly porous internal structure. Depending on the liquid extraction time scale, this stage can be carried out in situ, within the chip, or ex situ, in an external S2 bath. Bimodal polymer plugs are achieved using asymmetrically inverted T junctions. For this demonstration, we form sodium poly(styrenesulfonate) (P) particles using water (S1), hexadecane (C), and methyl ethyl ketone (S2). We measure droplet extraction rates as a function of drop size and polymer concentration and propose a simple scaling model to guide particle formation. We find that the extraction time required to form particles from liquid droplets does not depend on the initial polymer concentration but is rather proportional to the initial droplet size. The resulting particle size follows a linear relationship with the initial droplet size for all polymer concentrations, allowing for the precise control of particle size. The internal particle porous structure exhibits a polymer density gradient ranging from a dense surface skin toward an essentially hollow core. Average particle porosities between 10 and 50% are achieved by varying the initial droplet compositions up to 15 wt % polymer. Such particles have potential applications in functional, optical, and coating materials.

AB - We report the controlled formation of internally porous polyelectrolyte particles with diameters ranging from tens to hundreds of micrometers through selective solvent extraction using microfluidics. Solvent-resistant microdevices, fabricated by frontal photopolymerization, encapsulate binary polymer (P)/solvent (S1) mixtures by a carrier solvent phase (C) to form plugs with well-defined radii and low polydispersity; the suspension is then brought into contact with a selective extraction solvent (S2) that is miscible with C and S1 but not P, leading to the extraction of S1 from the droplets. The ensuing phase inversion yields polymer capsules with a smooth surface but highly porous internal structure. Depending on the liquid extraction time scale, this stage can be carried out in situ, within the chip, or ex situ, in an external S2 bath. Bimodal polymer plugs are achieved using asymmetrically inverted T junctions. For this demonstration, we form sodium poly(styrenesulfonate) (P) particles using water (S1), hexadecane (C), and methyl ethyl ketone (S2). We measure droplet extraction rates as a function of drop size and polymer concentration and propose a simple scaling model to guide particle formation. We find that the extraction time required to form particles from liquid droplets does not depend on the initial polymer concentration but is rather proportional to the initial droplet size. The resulting particle size follows a linear relationship with the initial droplet size for all polymer concentrations, allowing for the precise control of particle size. The internal particle porous structure exhibits a polymer density gradient ranging from a dense surface skin toward an essentially hollow core. Average particle porosities between 10 and 50% are achieved by varying the initial droplet compositions up to 15 wt % polymer. Such particles have potential applications in functional, optical, and coating materials.

UR - http://www.scopus.com/inward/record.url?scp=84896768476&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84896768476&partnerID=8YFLogxK

U2 - 10.1021/la404506b

DO - 10.1021/la404506b

M3 - Article

VL - 30

SP - 2470

EP - 2479

JO - Langmuir

JF - Langmuir

SN - 0743-7463

IS - 9

ER -