Microfabrication of U-shaped grooves on the surface of BaO-TiO2- GeO2 glass by YAG laser irradiation and selective chemical etching

Naomi Hirokawa, Tsuyoshi Honma, Takayuki Komatsuw, Yasuhiko Benino

Research output: Contribution to journalArticle

7 Citations (Scopus)

Abstract

A combination technique of Nd:YAG laser (wavelength: 1064 nm) irradiations and chemical etchings was applied to fabricate microsize U-shaped grooves on the surface of CuO-doped BaO-TiO2-GeO2 glass, and chemical etching behaviors were examined by using a confocal scanning laser microscope. Continuous-wave Nd:YAG lasers with a power of 0.7-0.8 W were irradiated onto the glass surface and scanned at a speed of 10 μm/s, inducing structural modified lines with refractive index changes. The chemical etching rates for the refractive index changed lines in a nitric acid solution (1N HNO3) were larger than those for the base glass (nonirradiated part). The etching profile was changed gradually from W-shaped to U-shaped grooves with increasing etching time. The sharp bending lines with an angle of 150° and the cross-linked lines were also smoothly etched. The U-shaped grooves with a surface covered by nonlinear optical Ba2TiGe2O8 crystals were formed by the crystallization of etched samples. This study proposes that the patterning of microchannels with optical functional surfaces is possible on the glass surface using the present technique.

Original languageEnglish
Pages (from-to)2170-2175
Number of pages6
JournalJournal of the American Ceramic Society
Volume91
Issue number7
DOIs
Publication statusPublished - Jul 2008

    Fingerprint

ASJC Scopus subject areas

  • Ceramics and Composites
  • Materials Chemistry

Cite this