Mechanically Alloyed Ti-Mo Solid Solution and Its Microstructure

Woo Yeong Lim, Moritaka Hida, Akira Sakakibara, Yoshito Takemoto, Hironobu Maeda, Eiichi Sukedai

Research output: Contribution to journalArticle

3 Citations (Scopus)

Abstract

Mixture of Ti and Mo powders was mechanically alloyed to obtain β-type Ti-20mass-%Mo alloy. The mechanism of mechanical alloying(MA) of Ti-20mass%Mo and microstructure of its product were investigated by X-ray diffraction, XAFS and TEM. X-ray diffraction profile showed that complete alloying was attained by the 36ks-MA, but incompleteness was revealed by the analysis of XAFS. According to the result of XAFS, 144ks-MA was needed to accomplish alloying. The radial structural parameters of j-th shell, Rj, Nj and σj are obtained by curve fitting method on a two-shell, double Mo-Mo and Mo-Ti pairs. Nearest neighbor bond length(Rj) decreased with the time of MA. From the observation of TEM, it was revealed that mechanically alloyed particle was composed of small domains with different lattice images in direction, like subgrains. Deformation of the lattice image was also recognized for the MA specimen.

Original languageEnglish
Pages (from-to)639-646
Number of pages8
JournalFuntai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy
Volume37
Issue number5
DOIs
Publication statusPublished - 1990
Externally publishedYes

Fingerprint

Mechanical alloying
Solid solutions
Microstructure
Alloying
Transmission electron microscopy
X ray diffraction
Curve fitting
Bond length
Powders

ASJC Scopus subject areas

  • Mechanical Engineering
  • Metals and Alloys
  • Industrial and Manufacturing Engineering
  • Materials Chemistry

Cite this

Mechanically Alloyed Ti-Mo Solid Solution and Its Microstructure. / Lim, Woo Yeong; Hida, Moritaka; Sakakibara, Akira; Takemoto, Yoshito; Maeda, Hironobu; Sukedai, Eiichi.

In: Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy, Vol. 37, No. 5, 1990, p. 639-646.

Research output: Contribution to journalArticle

Lim, Woo Yeong ; Hida, Moritaka ; Sakakibara, Akira ; Takemoto, Yoshito ; Maeda, Hironobu ; Sukedai, Eiichi. / Mechanically Alloyed Ti-Mo Solid Solution and Its Microstructure. In: Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy. 1990 ; Vol. 37, No. 5. pp. 639-646.
@article{882ada899f524eccad1324372b0737d0,
title = "Mechanically Alloyed Ti-Mo Solid Solution and Its Microstructure",
abstract = "Mixture of Ti and Mo powders was mechanically alloyed to obtain β-type Ti-20mass-{\%}Mo alloy. The mechanism of mechanical alloying(MA) of Ti-20mass{\%}Mo and microstructure of its product were investigated by X-ray diffraction, XAFS and TEM. X-ray diffraction profile showed that complete alloying was attained by the 36ks-MA, but incompleteness was revealed by the analysis of XAFS. According to the result of XAFS, 144ks-MA was needed to accomplish alloying. The radial structural parameters of j-th shell, Rj, Nj and σj are obtained by curve fitting method on a two-shell, double Mo-Mo and Mo-Ti pairs. Nearest neighbor bond length(Rj) decreased with the time of MA. From the observation of TEM, it was revealed that mechanically alloyed particle was composed of small domains with different lattice images in direction, like subgrains. Deformation of the lattice image was also recognized for the MA specimen.",
author = "Lim, {Woo Yeong} and Moritaka Hida and Akira Sakakibara and Yoshito Takemoto and Hironobu Maeda and Eiichi Sukedai",
year = "1990",
doi = "10.2497/jjspm.37.636",
language = "English",
volume = "37",
pages = "639--646",
journal = "Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy",
issn = "0532-8799",
publisher = "Funtai Funamtsu Yakin Kyokai/Japan Soc. of Powder Metallurgy",
number = "5",

}

TY - JOUR

T1 - Mechanically Alloyed Ti-Mo Solid Solution and Its Microstructure

AU - Lim, Woo Yeong

AU - Hida, Moritaka

AU - Sakakibara, Akira

AU - Takemoto, Yoshito

AU - Maeda, Hironobu

AU - Sukedai, Eiichi

PY - 1990

Y1 - 1990

N2 - Mixture of Ti and Mo powders was mechanically alloyed to obtain β-type Ti-20mass-%Mo alloy. The mechanism of mechanical alloying(MA) of Ti-20mass%Mo and microstructure of its product were investigated by X-ray diffraction, XAFS and TEM. X-ray diffraction profile showed that complete alloying was attained by the 36ks-MA, but incompleteness was revealed by the analysis of XAFS. According to the result of XAFS, 144ks-MA was needed to accomplish alloying. The radial structural parameters of j-th shell, Rj, Nj and σj are obtained by curve fitting method on a two-shell, double Mo-Mo and Mo-Ti pairs. Nearest neighbor bond length(Rj) decreased with the time of MA. From the observation of TEM, it was revealed that mechanically alloyed particle was composed of small domains with different lattice images in direction, like subgrains. Deformation of the lattice image was also recognized for the MA specimen.

AB - Mixture of Ti and Mo powders was mechanically alloyed to obtain β-type Ti-20mass-%Mo alloy. The mechanism of mechanical alloying(MA) of Ti-20mass%Mo and microstructure of its product were investigated by X-ray diffraction, XAFS and TEM. X-ray diffraction profile showed that complete alloying was attained by the 36ks-MA, but incompleteness was revealed by the analysis of XAFS. According to the result of XAFS, 144ks-MA was needed to accomplish alloying. The radial structural parameters of j-th shell, Rj, Nj and σj are obtained by curve fitting method on a two-shell, double Mo-Mo and Mo-Ti pairs. Nearest neighbor bond length(Rj) decreased with the time of MA. From the observation of TEM, it was revealed that mechanically alloyed particle was composed of small domains with different lattice images in direction, like subgrains. Deformation of the lattice image was also recognized for the MA specimen.

UR - http://www.scopus.com/inward/record.url?scp=85004400317&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85004400317&partnerID=8YFLogxK

U2 - 10.2497/jjspm.37.636

DO - 10.2497/jjspm.37.636

M3 - Article

AN - SCOPUS:0025450636

VL - 37

SP - 639

EP - 646

JO - Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy

JF - Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy

SN - 0532-8799

IS - 5

ER -