Measurement of Pulsating Flowrate from a Gear Pump

Seiichi Washio, Satoshi Yamaguchi, Satoshi Takahashi

Research output: Contribution to journalArticle

2 Citations (Scopus)

Abstract

Oil hydraulic gear pumps are well known for yielding a pulsating flowrate which is theoretically determined by the geometry of gears. In the present paper, we aim to measure actual waveforms of a gear pump output with high-frequency pulsation. The measurement is based on detecting pressure differences kinetically induced by the motion of an oil column, and the accuracy of the method has proven satisfactory in advance of actual use. The findings are as follows : (1) Whether the pulsation impedance for the 1st harmonic at the pump outport is larger or smaller than that for the 2nd harmonic mainly dominates the waveforms of flowrate pulsation. (2) According to whether the impedance for the 1st harmonic is larger or smaller than that for the 2nd harmonic, the 2nd harmonic of pump output becomes larger and the 1st one smaller than the theoretical predictions, or vice versa. (3) This tendency becomes more marked as the line pressure increases.

Original languageEnglish
Pages (from-to)2855-2862
Number of pages8
JournalTransactions of the Japan Society of Mechanical Engineers Series B
Volume59
Issue number565
DOIs
Publication statusPublished - Jan 1 1993
Externally publishedYes

Keywords

  • Flowrate
  • Gear Pump
  • Harmonics
  • Impedance
  • Oil Hydraulics
  • Pulsation

ASJC Scopus subject areas

  • Condensed Matter Physics
  • Mechanical Engineering

Fingerprint Dive into the research topics of 'Measurement of Pulsating Flowrate from a Gear Pump'. Together they form a unique fingerprint.

Cite this