Longwave Infrared Camera onboard the Venus Climate Orbiter

M. Taguchi, T. Fukuhara, T. Imamura, M. Nakamura, N. Iwagami, M. Ueno, M. Suzuki, Joji Hashimoto, K. Mitsuyama

Research output: Contribution to journalArticle

20 Citations (Scopus)

Abstract

The Longwave Infrared Camera (LIR) onboard the first Japanese Venus mission, PLANET-C, or the Venus Climate Orbiter, operates in the middle infrared region with a single bandpass filter of 8-12 μm, measuring thermal radiation emitted from the cloud tops of the Venusian atmosphere. A horizontal wind vector field at the cloud-top height will be retrieved by means of a cloud tracking method. In addition, absolute temperature will be determined with an accuracy of 3 K. Since solar irradiation scattered by the atmosphere is much weaker than the atmospheric thermal radiation, LIR can continuously monitor a hemispheric wind field independent of the local time of the apocenter throughout the mission life. Wind and temperature fields obtained by LIR will provide key parameters to solve climatological issues related to the Venusian atmosphere. The use of an uncooled micro-bolometer array (UMBA), which requires no cryogenic apparatus, as an image sensor contributes to the reduction of power consumption and the weight of the LIR imager. An instrumental field-of-view of 12° is equal to the angle subtended by Venus when observed from a height of 9.5 Rv. The pixel field-of-view corresponds to a spatial resolution of 70 km viewed from the apocenter. A mechanical shutter functions not only as an optical shutter but also as a reference blackbody. The temperature stability of the sensor is especially important, because fluctuation of thermal radiation from the internal environment of the sensor itself causes background noise. Therefore, the temperature of the UMBA package is stabilized at 313 ± 0.1 K with a feedback controlled Peltier cooler/heater, and a NETD of 0.3 K, which is required for this infrared imager, will be achieved. Flat field images are taken with the shutter closed several seconds before and after 1 s exposure for a Venus thermal image. After a Venus image is taken, the LIR imager takes a cold calibration image of deep space. This measurement sequence is repeated every two hours when the spacecraft is orbiting at apocenter. Image data are transmitted down to the Earth after onboard calibration and data compression by common digital electronics.

Original languageEnglish
Pages (from-to)861-868
Number of pages8
JournalAdvances in Space Research
Volume40
Issue number6
DOIs
Publication statusPublished - 2007
Externally publishedYes

Fingerprint

Venus (planet)
Venus
climate
Cameras
cameras
Infrared radiation
shutters
Image sensors
thermal radiation
Heat radiation
bolometers
Bolometers
sensor
field of view
atmospheres
atmosphere
sensors
temperature
Optical shutters
calibration

Keywords

  • Dynamics
  • Imaging
  • Infrared
  • PLANET-C
  • Venus

ASJC Scopus subject areas

  • Space and Planetary Science
  • Astronomy and Astrophysics

Cite this

Taguchi, M., Fukuhara, T., Imamura, T., Nakamura, M., Iwagami, N., Ueno, M., ... Mitsuyama, K. (2007). Longwave Infrared Camera onboard the Venus Climate Orbiter. Advances in Space Research, 40(6), 861-868. https://doi.org/10.1016/j.asr.2007.05.085

Longwave Infrared Camera onboard the Venus Climate Orbiter. / Taguchi, M.; Fukuhara, T.; Imamura, T.; Nakamura, M.; Iwagami, N.; Ueno, M.; Suzuki, M.; Hashimoto, Joji; Mitsuyama, K.

In: Advances in Space Research, Vol. 40, No. 6, 2007, p. 861-868.

Research output: Contribution to journalArticle

Taguchi, M, Fukuhara, T, Imamura, T, Nakamura, M, Iwagami, N, Ueno, M, Suzuki, M, Hashimoto, J & Mitsuyama, K 2007, 'Longwave Infrared Camera onboard the Venus Climate Orbiter', Advances in Space Research, vol. 40, no. 6, pp. 861-868. https://doi.org/10.1016/j.asr.2007.05.085
Taguchi M, Fukuhara T, Imamura T, Nakamura M, Iwagami N, Ueno M et al. Longwave Infrared Camera onboard the Venus Climate Orbiter. Advances in Space Research. 2007;40(6):861-868. https://doi.org/10.1016/j.asr.2007.05.085
Taguchi, M. ; Fukuhara, T. ; Imamura, T. ; Nakamura, M. ; Iwagami, N. ; Ueno, M. ; Suzuki, M. ; Hashimoto, Joji ; Mitsuyama, K. / Longwave Infrared Camera onboard the Venus Climate Orbiter. In: Advances in Space Research. 2007 ; Vol. 40, No. 6. pp. 861-868.
@article{022c54ffa0d44569be87ffc6fac56dd0,
title = "Longwave Infrared Camera onboard the Venus Climate Orbiter",
abstract = "The Longwave Infrared Camera (LIR) onboard the first Japanese Venus mission, PLANET-C, or the Venus Climate Orbiter, operates in the middle infrared region with a single bandpass filter of 8-12 μm, measuring thermal radiation emitted from the cloud tops of the Venusian atmosphere. A horizontal wind vector field at the cloud-top height will be retrieved by means of a cloud tracking method. In addition, absolute temperature will be determined with an accuracy of 3 K. Since solar irradiation scattered by the atmosphere is much weaker than the atmospheric thermal radiation, LIR can continuously monitor a hemispheric wind field independent of the local time of the apocenter throughout the mission life. Wind and temperature fields obtained by LIR will provide key parameters to solve climatological issues related to the Venusian atmosphere. The use of an uncooled micro-bolometer array (UMBA), which requires no cryogenic apparatus, as an image sensor contributes to the reduction of power consumption and the weight of the LIR imager. An instrumental field-of-view of 12° is equal to the angle subtended by Venus when observed from a height of 9.5 Rv. The pixel field-of-view corresponds to a spatial resolution of 70 km viewed from the apocenter. A mechanical shutter functions not only as an optical shutter but also as a reference blackbody. The temperature stability of the sensor is especially important, because fluctuation of thermal radiation from the internal environment of the sensor itself causes background noise. Therefore, the temperature of the UMBA package is stabilized at 313 ± 0.1 K with a feedback controlled Peltier cooler/heater, and a NETD of 0.3 K, which is required for this infrared imager, will be achieved. Flat field images are taken with the shutter closed several seconds before and after 1 s exposure for a Venus thermal image. After a Venus image is taken, the LIR imager takes a cold calibration image of deep space. This measurement sequence is repeated every two hours when the spacecraft is orbiting at apocenter. Image data are transmitted down to the Earth after onboard calibration and data compression by common digital electronics.",
keywords = "Dynamics, Imaging, Infrared, PLANET-C, Venus",
author = "M. Taguchi and T. Fukuhara and T. Imamura and M. Nakamura and N. Iwagami and M. Ueno and M. Suzuki and Joji Hashimoto and K. Mitsuyama",
year = "2007",
doi = "10.1016/j.asr.2007.05.085",
language = "English",
volume = "40",
pages = "861--868",
journal = "Advances in Space Research",
issn = "0273-1177",
publisher = "Elsevier Limited",
number = "6",

}

TY - JOUR

T1 - Longwave Infrared Camera onboard the Venus Climate Orbiter

AU - Taguchi, M.

AU - Fukuhara, T.

AU - Imamura, T.

AU - Nakamura, M.

AU - Iwagami, N.

AU - Ueno, M.

AU - Suzuki, M.

AU - Hashimoto, Joji

AU - Mitsuyama, K.

PY - 2007

Y1 - 2007

N2 - The Longwave Infrared Camera (LIR) onboard the first Japanese Venus mission, PLANET-C, or the Venus Climate Orbiter, operates in the middle infrared region with a single bandpass filter of 8-12 μm, measuring thermal radiation emitted from the cloud tops of the Venusian atmosphere. A horizontal wind vector field at the cloud-top height will be retrieved by means of a cloud tracking method. In addition, absolute temperature will be determined with an accuracy of 3 K. Since solar irradiation scattered by the atmosphere is much weaker than the atmospheric thermal radiation, LIR can continuously monitor a hemispheric wind field independent of the local time of the apocenter throughout the mission life. Wind and temperature fields obtained by LIR will provide key parameters to solve climatological issues related to the Venusian atmosphere. The use of an uncooled micro-bolometer array (UMBA), which requires no cryogenic apparatus, as an image sensor contributes to the reduction of power consumption and the weight of the LIR imager. An instrumental field-of-view of 12° is equal to the angle subtended by Venus when observed from a height of 9.5 Rv. The pixel field-of-view corresponds to a spatial resolution of 70 km viewed from the apocenter. A mechanical shutter functions not only as an optical shutter but also as a reference blackbody. The temperature stability of the sensor is especially important, because fluctuation of thermal radiation from the internal environment of the sensor itself causes background noise. Therefore, the temperature of the UMBA package is stabilized at 313 ± 0.1 K with a feedback controlled Peltier cooler/heater, and a NETD of 0.3 K, which is required for this infrared imager, will be achieved. Flat field images are taken with the shutter closed several seconds before and after 1 s exposure for a Venus thermal image. After a Venus image is taken, the LIR imager takes a cold calibration image of deep space. This measurement sequence is repeated every two hours when the spacecraft is orbiting at apocenter. Image data are transmitted down to the Earth after onboard calibration and data compression by common digital electronics.

AB - The Longwave Infrared Camera (LIR) onboard the first Japanese Venus mission, PLANET-C, or the Venus Climate Orbiter, operates in the middle infrared region with a single bandpass filter of 8-12 μm, measuring thermal radiation emitted from the cloud tops of the Venusian atmosphere. A horizontal wind vector field at the cloud-top height will be retrieved by means of a cloud tracking method. In addition, absolute temperature will be determined with an accuracy of 3 K. Since solar irradiation scattered by the atmosphere is much weaker than the atmospheric thermal radiation, LIR can continuously monitor a hemispheric wind field independent of the local time of the apocenter throughout the mission life. Wind and temperature fields obtained by LIR will provide key parameters to solve climatological issues related to the Venusian atmosphere. The use of an uncooled micro-bolometer array (UMBA), which requires no cryogenic apparatus, as an image sensor contributes to the reduction of power consumption and the weight of the LIR imager. An instrumental field-of-view of 12° is equal to the angle subtended by Venus when observed from a height of 9.5 Rv. The pixel field-of-view corresponds to a spatial resolution of 70 km viewed from the apocenter. A mechanical shutter functions not only as an optical shutter but also as a reference blackbody. The temperature stability of the sensor is especially important, because fluctuation of thermal radiation from the internal environment of the sensor itself causes background noise. Therefore, the temperature of the UMBA package is stabilized at 313 ± 0.1 K with a feedback controlled Peltier cooler/heater, and a NETD of 0.3 K, which is required for this infrared imager, will be achieved. Flat field images are taken with the shutter closed several seconds before and after 1 s exposure for a Venus thermal image. After a Venus image is taken, the LIR imager takes a cold calibration image of deep space. This measurement sequence is repeated every two hours when the spacecraft is orbiting at apocenter. Image data are transmitted down to the Earth after onboard calibration and data compression by common digital electronics.

KW - Dynamics

KW - Imaging

KW - Infrared

KW - PLANET-C

KW - Venus

UR - http://www.scopus.com/inward/record.url?scp=34548221053&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=34548221053&partnerID=8YFLogxK

U2 - 10.1016/j.asr.2007.05.085

DO - 10.1016/j.asr.2007.05.085

M3 - Article

AN - SCOPUS:34548221053

VL - 40

SP - 861

EP - 868

JO - Advances in Space Research

JF - Advances in Space Research

SN - 0273-1177

IS - 6

ER -