LED mini-lidar for Mars rover

Tatsuo Shiina, Sonoko Yamada, Hiroki Senshu, Naohito Otobe, Joji Hashimoto, Yasuhiro Kawabata

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Abstract

A mini-lidar to observe the activity of Martian atmosphere is developed. The 10cm-cube LED mini-lidar was designed to be onboard a Mars rover. The light source of the mini-lidar is a high powered LED of 385nm. LED was adopted as light source because of its toughness against circumference change and physical shock for launch. The pulsed power and the pulse repetition frequency of LED beam were designed as 0.75W (=7.5nJ/10ns) and 500kHz, respectively. Lidar echoes were caught by the specially designed Cassegrain telescope, which has the shorter telescope tube than the usual to meet the 10cm-cube size limit. The high-speed photon counter was developed to pursue to the pulse repetition frequency of the LED light. The measurement range is no shorter than 30m depending back-ground condition. Its spatial resolution was improved as 0.15m (=1ns) by this photon counter. The demonstrative experiment was conducted at large wind tunnel facility of Japan Meteorological Agency. The measurement target was smoke of glycerin particles. The smoke was flowed in the wind tunnel with wind speed of 0 - 5m. Smoke diffusion and its propagation due to the wind flow were observed by the LED mini-lidar. This result suggests that the developed lidar can pursue the structure and the motion of dust devil of >2m.

Original languageEnglish
Title of host publicationLidar Technologies, Techniques, and Measurements for Atmospheric Remote Sensing XII
PublisherSPIE
Volume10006
ISBN (Electronic)9781510604162
DOIs
Publication statusPublished - 2016
EventLidar Technologies, Techniques, and Measurements for Atmospheric Remote Sensing XII - Edinburgh, United Kingdom
Duration: Sep 26 2016Sep 27 2016

Other

OtherLidar Technologies, Techniques, and Measurements for Atmospheric Remote Sensing XII
CountryUnited Kingdom
CityEdinburgh
Period9/26/169/27/16

Fingerprint

Mars
Lidar
Optical radar
optical radar
mars
Light emitting diodes
light emitting diodes
smoke
Smoke
Wind Tunnel
wind tunnels
Telescopes
Regular hexahedron
Wind tunnels
Telescope
Light sources
repetition
light sources
Photon
counters

Keywords

  • Dust
  • Flow
  • LED
  • Lidar
  • Mars

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Condensed Matter Physics
  • Computer Science Applications
  • Applied Mathematics
  • Electrical and Electronic Engineering

Cite this

Shiina, T., Yamada, S., Senshu, H., Otobe, N., Hashimoto, J., & Kawabata, Y. (2016). LED mini-lidar for Mars rover. In Lidar Technologies, Techniques, and Measurements for Atmospheric Remote Sensing XII (Vol. 10006). [100060F] SPIE. https://doi.org/10.1117/12.2241976

LED mini-lidar for Mars rover. / Shiina, Tatsuo; Yamada, Sonoko; Senshu, Hiroki; Otobe, Naohito; Hashimoto, Joji; Kawabata, Yasuhiro.

Lidar Technologies, Techniques, and Measurements for Atmospheric Remote Sensing XII. Vol. 10006 SPIE, 2016. 100060F.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Shiina, T, Yamada, S, Senshu, H, Otobe, N, Hashimoto, J & Kawabata, Y 2016, LED mini-lidar for Mars rover. in Lidar Technologies, Techniques, and Measurements for Atmospheric Remote Sensing XII. vol. 10006, 100060F, SPIE, Lidar Technologies, Techniques, and Measurements for Atmospheric Remote Sensing XII, Edinburgh, United Kingdom, 9/26/16. https://doi.org/10.1117/12.2241976
Shiina T, Yamada S, Senshu H, Otobe N, Hashimoto J, Kawabata Y. LED mini-lidar for Mars rover. In Lidar Technologies, Techniques, and Measurements for Atmospheric Remote Sensing XII. Vol. 10006. SPIE. 2016. 100060F https://doi.org/10.1117/12.2241976
Shiina, Tatsuo ; Yamada, Sonoko ; Senshu, Hiroki ; Otobe, Naohito ; Hashimoto, Joji ; Kawabata, Yasuhiro. / LED mini-lidar for Mars rover. Lidar Technologies, Techniques, and Measurements for Atmospheric Remote Sensing XII. Vol. 10006 SPIE, 2016.
@inproceedings{0ec4e91cc9e34ab495caf65bac1cc86b,
title = "LED mini-lidar for Mars rover",
abstract = "A mini-lidar to observe the activity of Martian atmosphere is developed. The 10cm-cube LED mini-lidar was designed to be onboard a Mars rover. The light source of the mini-lidar is a high powered LED of 385nm. LED was adopted as light source because of its toughness against circumference change and physical shock for launch. The pulsed power and the pulse repetition frequency of LED beam were designed as 0.75W (=7.5nJ/10ns) and 500kHz, respectively. Lidar echoes were caught by the specially designed Cassegrain telescope, which has the shorter telescope tube than the usual to meet the 10cm-cube size limit. The high-speed photon counter was developed to pursue to the pulse repetition frequency of the LED light. The measurement range is no shorter than 30m depending back-ground condition. Its spatial resolution was improved as 0.15m (=1ns) by this photon counter. The demonstrative experiment was conducted at large wind tunnel facility of Japan Meteorological Agency. The measurement target was smoke of glycerin particles. The smoke was flowed in the wind tunnel with wind speed of 0 - 5m. Smoke diffusion and its propagation due to the wind flow were observed by the LED mini-lidar. This result suggests that the developed lidar can pursue the structure and the motion of dust devil of >2m.",
keywords = "Dust, Flow, LED, Lidar, Mars",
author = "Tatsuo Shiina and Sonoko Yamada and Hiroki Senshu and Naohito Otobe and Joji Hashimoto and Yasuhiro Kawabata",
year = "2016",
doi = "10.1117/12.2241976",
language = "English",
volume = "10006",
booktitle = "Lidar Technologies, Techniques, and Measurements for Atmospheric Remote Sensing XII",
publisher = "SPIE",
address = "United States",

}

TY - GEN

T1 - LED mini-lidar for Mars rover

AU - Shiina, Tatsuo

AU - Yamada, Sonoko

AU - Senshu, Hiroki

AU - Otobe, Naohito

AU - Hashimoto, Joji

AU - Kawabata, Yasuhiro

PY - 2016

Y1 - 2016

N2 - A mini-lidar to observe the activity of Martian atmosphere is developed. The 10cm-cube LED mini-lidar was designed to be onboard a Mars rover. The light source of the mini-lidar is a high powered LED of 385nm. LED was adopted as light source because of its toughness against circumference change and physical shock for launch. The pulsed power and the pulse repetition frequency of LED beam were designed as 0.75W (=7.5nJ/10ns) and 500kHz, respectively. Lidar echoes were caught by the specially designed Cassegrain telescope, which has the shorter telescope tube than the usual to meet the 10cm-cube size limit. The high-speed photon counter was developed to pursue to the pulse repetition frequency of the LED light. The measurement range is no shorter than 30m depending back-ground condition. Its spatial resolution was improved as 0.15m (=1ns) by this photon counter. The demonstrative experiment was conducted at large wind tunnel facility of Japan Meteorological Agency. The measurement target was smoke of glycerin particles. The smoke was flowed in the wind tunnel with wind speed of 0 - 5m. Smoke diffusion and its propagation due to the wind flow were observed by the LED mini-lidar. This result suggests that the developed lidar can pursue the structure and the motion of dust devil of >2m.

AB - A mini-lidar to observe the activity of Martian atmosphere is developed. The 10cm-cube LED mini-lidar was designed to be onboard a Mars rover. The light source of the mini-lidar is a high powered LED of 385nm. LED was adopted as light source because of its toughness against circumference change and physical shock for launch. The pulsed power and the pulse repetition frequency of LED beam were designed as 0.75W (=7.5nJ/10ns) and 500kHz, respectively. Lidar echoes were caught by the specially designed Cassegrain telescope, which has the shorter telescope tube than the usual to meet the 10cm-cube size limit. The high-speed photon counter was developed to pursue to the pulse repetition frequency of the LED light. The measurement range is no shorter than 30m depending back-ground condition. Its spatial resolution was improved as 0.15m (=1ns) by this photon counter. The demonstrative experiment was conducted at large wind tunnel facility of Japan Meteorological Agency. The measurement target was smoke of glycerin particles. The smoke was flowed in the wind tunnel with wind speed of 0 - 5m. Smoke diffusion and its propagation due to the wind flow were observed by the LED mini-lidar. This result suggests that the developed lidar can pursue the structure and the motion of dust devil of >2m.

KW - Dust

KW - Flow

KW - LED

KW - Lidar

KW - Mars

UR - http://www.scopus.com/inward/record.url?scp=85008397756&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85008397756&partnerID=8YFLogxK

U2 - 10.1117/12.2241976

DO - 10.1117/12.2241976

M3 - Conference contribution

AN - SCOPUS:85008397756

VL - 10006

BT - Lidar Technologies, Techniques, and Measurements for Atmospheric Remote Sensing XII

PB - SPIE

ER -