Investigation of surface treatment method by high-speed scanning of single-mode fiber laser with MOPA

Yasuhiro Okamoto, Yoshiyuki Uno, Tetsuomi Mohri, Taito Izawa

Research output: Contribution to journalArticle

2 Citations (Scopus)

Abstract

A newly surface treatment method was proposed by the combination of the high-speed laser scanning with Galvano scanner and the single-mode pulsed fiber laser with Master Oscillator Power Amplifier, and various periodic structures could be formed by this technique. The surface roughness of irradiated area increased almost proportionally with increasing the number of laser scan, and it could be controlled by the number of scan. The repellency of surface could be increased by the laser irradiation compared to that of ground surface under nitrogen atmosphere condition, while the hydrophilic property of surface could be improved by the laser scanning under air atmosphere condition. Moreover, it was found that the corrosion resistance of the surface could be improved by aser irradiation.

Original languageEnglish
Pages (from-to)624-627
Number of pages4
JournalKey Engineering Materials
Volume407-408
DOIs
Publication statusPublished - 2009

Fingerprint

Single mode fibers
Fiber lasers
Surface treatment
Scanning
Lasers
Periodic structures
Laser beam effects
Laser modes
Pulsed lasers
Power amplifiers
Corrosion resistance
Nitrogen
Surface roughness
Irradiation
lysophosphatidic acid
Air

Keywords

  • Fiber laser
  • High-speed scanning
  • MOPA
  • Repellency
  • Single-mode
  • Surface treatment

ASJC Scopus subject areas

  • Materials Science(all)
  • Mechanics of Materials
  • Mechanical Engineering

Cite this

Investigation of surface treatment method by high-speed scanning of single-mode fiber laser with MOPA. / Okamoto, Yasuhiro; Uno, Yoshiyuki; Mohri, Tetsuomi; Izawa, Taito.

In: Key Engineering Materials, Vol. 407-408, 2009, p. 624-627.

Research output: Contribution to journalArticle

@article{66ee8249284f4b4fa7543f4bc490fb0c,
title = "Investigation of surface treatment method by high-speed scanning of single-mode fiber laser with MOPA",
abstract = "A newly surface treatment method was proposed by the combination of the high-speed laser scanning with Galvano scanner and the single-mode pulsed fiber laser with Master Oscillator Power Amplifier, and various periodic structures could be formed by this technique. The surface roughness of irradiated area increased almost proportionally with increasing the number of laser scan, and it could be controlled by the number of scan. The repellency of surface could be increased by the laser irradiation compared to that of ground surface under nitrogen atmosphere condition, while the hydrophilic property of surface could be improved by the laser scanning under air atmosphere condition. Moreover, it was found that the corrosion resistance of the surface could be improved by aser irradiation.",
keywords = "Fiber laser, High-speed scanning, MOPA, Repellency, Single-mode, Surface treatment",
author = "Yasuhiro Okamoto and Yoshiyuki Uno and Tetsuomi Mohri and Taito Izawa",
year = "2009",
doi = "10.4028/www.scientific.net/KEM.407-408.624",
language = "English",
volume = "407-408",
pages = "624--627",
journal = "Key Engineering Materials",
issn = "1013-9826",
publisher = "Trans Tech Publications",

}

TY - JOUR

T1 - Investigation of surface treatment method by high-speed scanning of single-mode fiber laser with MOPA

AU - Okamoto, Yasuhiro

AU - Uno, Yoshiyuki

AU - Mohri, Tetsuomi

AU - Izawa, Taito

PY - 2009

Y1 - 2009

N2 - A newly surface treatment method was proposed by the combination of the high-speed laser scanning with Galvano scanner and the single-mode pulsed fiber laser with Master Oscillator Power Amplifier, and various periodic structures could be formed by this technique. The surface roughness of irradiated area increased almost proportionally with increasing the number of laser scan, and it could be controlled by the number of scan. The repellency of surface could be increased by the laser irradiation compared to that of ground surface under nitrogen atmosphere condition, while the hydrophilic property of surface could be improved by the laser scanning under air atmosphere condition. Moreover, it was found that the corrosion resistance of the surface could be improved by aser irradiation.

AB - A newly surface treatment method was proposed by the combination of the high-speed laser scanning with Galvano scanner and the single-mode pulsed fiber laser with Master Oscillator Power Amplifier, and various periodic structures could be formed by this technique. The surface roughness of irradiated area increased almost proportionally with increasing the number of laser scan, and it could be controlled by the number of scan. The repellency of surface could be increased by the laser irradiation compared to that of ground surface under nitrogen atmosphere condition, while the hydrophilic property of surface could be improved by the laser scanning under air atmosphere condition. Moreover, it was found that the corrosion resistance of the surface could be improved by aser irradiation.

KW - Fiber laser

KW - High-speed scanning

KW - MOPA

KW - Repellency

KW - Single-mode

KW - Surface treatment

UR - http://www.scopus.com/inward/record.url?scp=68049118723&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=68049118723&partnerID=8YFLogxK

U2 - 10.4028/www.scientific.net/KEM.407-408.624

DO - 10.4028/www.scientific.net/KEM.407-408.624

M3 - Article

AN - SCOPUS:68049118723

VL - 407-408

SP - 624

EP - 627

JO - Key Engineering Materials

JF - Key Engineering Materials

SN - 1013-9826

ER -