Influence of tip relief on working flank bulk temperature in spur gears

Masahiro Fujii, Fumio Obata, Akira Yoshida

Research output: Contribution to journalArticle

Abstract

The influence of tip relief on the approach side on the working flank bulk temperature, which has an intimate relationship with scoring occurrence, was studied taking the change of dynamic load into account. The amount of tip interference may be estimated well by Weber and Banaschek's formula for tooth deflection. The working flank bulk temperature is affected more by the change of dynamic load due to the tip relief than by the tip interference. The amount of the tip relief on the approach side and the range of the tip relief should be determined taking the influence of the dynamic load on the working flank bulk temperature into consideration.

Original languageEnglish
Pages (from-to)1564-1569
Number of pages6
JournalNihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C
Volume56
Issue number526
Publication statusPublished - Jun 1990
Externally publishedYes

Fingerprint

Spur gears
Dynamic loads
Temperature

ASJC Scopus subject areas

  • Mechanical Engineering

Cite this

Influence of tip relief on working flank bulk temperature in spur gears. / Fujii, Masahiro; Obata, Fumio; Yoshida, Akira.

In: Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, Vol. 56, No. 526, 06.1990, p. 1564-1569.

Research output: Contribution to journalArticle

@article{97052619d1494055856d7b2020a80d24,
title = "Influence of tip relief on working flank bulk temperature in spur gears",
abstract = "The influence of tip relief on the approach side on the working flank bulk temperature, which has an intimate relationship with scoring occurrence, was studied taking the change of dynamic load into account. The amount of tip interference may be estimated well by Weber and Banaschek's formula for tooth deflection. The working flank bulk temperature is affected more by the change of dynamic load due to the tip relief than by the tip interference. The amount of the tip relief on the approach side and the range of the tip relief should be determined taking the influence of the dynamic load on the working flank bulk temperature into consideration.",
author = "Masahiro Fujii and Fumio Obata and Akira Yoshida",
year = "1990",
month = "6",
language = "English",
volume = "56",
pages = "1564--1569",
journal = "Nippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C",
issn = "0387-5024",
publisher = "Japan Society of Mechanical Engineers",
number = "526",

}

TY - JOUR

T1 - Influence of tip relief on working flank bulk temperature in spur gears

AU - Fujii, Masahiro

AU - Obata, Fumio

AU - Yoshida, Akira

PY - 1990/6

Y1 - 1990/6

N2 - The influence of tip relief on the approach side on the working flank bulk temperature, which has an intimate relationship with scoring occurrence, was studied taking the change of dynamic load into account. The amount of tip interference may be estimated well by Weber and Banaschek's formula for tooth deflection. The working flank bulk temperature is affected more by the change of dynamic load due to the tip relief than by the tip interference. The amount of the tip relief on the approach side and the range of the tip relief should be determined taking the influence of the dynamic load on the working flank bulk temperature into consideration.

AB - The influence of tip relief on the approach side on the working flank bulk temperature, which has an intimate relationship with scoring occurrence, was studied taking the change of dynamic load into account. The amount of tip interference may be estimated well by Weber and Banaschek's formula for tooth deflection. The working flank bulk temperature is affected more by the change of dynamic load due to the tip relief than by the tip interference. The amount of the tip relief on the approach side and the range of the tip relief should be determined taking the influence of the dynamic load on the working flank bulk temperature into consideration.

UR - http://www.scopus.com/inward/record.url?scp=0025438984&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0025438984&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:0025438984

VL - 56

SP - 1564

EP - 1569

JO - Nippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C

JF - Nippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C

SN - 0387-5024

IS - 526

ER -