Abstract
In this study, the machining characteristics and the removal mechanism in EDM for one directional CFRP was discussed in order to investigate the influence of carbon fiber direction to machining direction and to attain high performance EDM. Then EDM characteristics with two different combinations of machining direction and carbon fiber direction were compared. Experimental results clarified that the material removal mechanism in the EDM for one directional CFRP when the machining direction is perpendicular to the fiber direction is different from that in parallel machining. Therefore, efficient EDM for CFRP is possible by selecting appropriate machining direction to fiber direction.
Original language | English |
---|---|
Title of host publication | Proceedings of the 6th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2011 |
Publication status | Published - 2011 |
Event | 6th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2011 - Omiya Sonic City, Saitama, Japan Duration: Nov 8 2011 → Nov 10 2011 |
Other
Other | 6th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2011 |
---|---|
Country | Japan |
City | Omiya Sonic City, Saitama |
Period | 11/8/11 → 11/10/11 |
Fingerprint
Keywords
- Carbon fiber reinforced plastic (CFRP)
- Electrical discharge machining (EDM)
- Electrode wear
- Material removal rate
- Surface roughness
ASJC Scopus subject areas
- Industrial and Manufacturing Engineering
Cite this
Influence of carbon fiber direction on EDM characteristics of CFRP. / Ichii, Sho; Okada, Akira; Okamoto, Yasuhiro; Uno, Yoshiyuki.
Proceedings of the 6th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2011. 2011.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
}
TY - GEN
T1 - Influence of carbon fiber direction on EDM characteristics of CFRP
AU - Ichii, Sho
AU - Okada, Akira
AU - Okamoto, Yasuhiro
AU - Uno, Yoshiyuki
PY - 2011
Y1 - 2011
N2 - In this study, the machining characteristics and the removal mechanism in EDM for one directional CFRP was discussed in order to investigate the influence of carbon fiber direction to machining direction and to attain high performance EDM. Then EDM characteristics with two different combinations of machining direction and carbon fiber direction were compared. Experimental results clarified that the material removal mechanism in the EDM for one directional CFRP when the machining direction is perpendicular to the fiber direction is different from that in parallel machining. Therefore, efficient EDM for CFRP is possible by selecting appropriate machining direction to fiber direction.
AB - In this study, the machining characteristics and the removal mechanism in EDM for one directional CFRP was discussed in order to investigate the influence of carbon fiber direction to machining direction and to attain high performance EDM. Then EDM characteristics with two different combinations of machining direction and carbon fiber direction were compared. Experimental results clarified that the material removal mechanism in the EDM for one directional CFRP when the machining direction is perpendicular to the fiber direction is different from that in parallel machining. Therefore, efficient EDM for CFRP is possible by selecting appropriate machining direction to fiber direction.
KW - Carbon fiber reinforced plastic (CFRP)
KW - Electrical discharge machining (EDM)
KW - Electrode wear
KW - Material removal rate
KW - Surface roughness
UR - http://www.scopus.com/inward/record.url?scp=84883386052&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=84883386052&partnerID=8YFLogxK
M3 - Conference contribution
AN - SCOPUS:84883386052
BT - Proceedings of the 6th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2011
ER -