Influence of Calcining Temperature on Formation of the High-Tc Phase in the Bi-Pb-Sr-Ca-Cu-O System

Jun Takada; Toshio Egi; Kiichi Oda; Hitoshi Kitaguchi; Akiyoshi Osaka; Yoshinari Miura; Hiroyuki Ito; Yasunori Ikeda; Mikio Takano

doi:10.2497/jjspm.37.54

Influence of Calcining Temperature on Formation of the High-Tc Phase in the Bi-Pb-Sr-Ca-Cu-O System

Jun Takada, Toshio Egi, Kiichi Oda, Hitoshi Kitaguchi, Akiyoshi Osaka, Yoshinari Miura, Hiroyuki Ito, Yasunori Ikeda, Mikio Takano

Faculty of Engineering

Research output: Contribution to journal › Article

2 Citations (Scopus)

Abstract

The influence of the calcining temperature on the formation of the high-Tc phase and the electrical conductivity has been studied for the sample with a nominal composition of Bi_0.96Pbg_0.24Sr_1.0Ca_1.6O_x. the product in the sample calcined at 680°C was much different from that in the sample calcined at 800°C. Namely, Bi_0.46Ca_0.54-ySry_1.1O_x(0.1<y<0.2), Bi₁₀Ca₇O₂₂, Ca₂PbO₄, SrCO₃ and CuO were formed at 680°C, while the low-Tc phase and Ca₂PbO₄ were mainly formed at 800°C. At 850°C, the fraction of the high-Tc phase increased more quickly in the sample calcined at 680°C than in the sample calcined at 800°C, and mostly monophasic high-Tc phase was obtained by the sintering at 850°C for 24h after the calcination at 680°C, however, that sample showed lower Tc_(zero)=87K than the sample calcined at 800°C.

Original language	English
Pages (from-to)	54-59
Number of pages	6
Journal	Journal of the Japan Society of Powder and Powder Metallurgy
Volume	37
Issue number	1
DOIs	https://doi.org/10.2497/jjspm.37.54
Publication status	Published - 1990

ASJC Scopus subject areas

Mechanical Engineering
Industrial and Manufacturing Engineering
Metals and Alloys
Materials Chemistry

Access to Document

10.2497/jjspm.37.54

Fingerprint Dive into the research topics of 'Influence of Calcining Temperature on Formation of the High-Tc Phase in the Bi-Pb-Sr-Ca-Cu-O System'. Together they form a unique fingerprint.

Cite this

Takada, J., Egi, T., Oda, K., Kitaguchi, H., Osaka, A., Miura, Y., Ito, H., Ikeda, Y., & Takano, M. (1990). Influence of Calcining Temperature on Formation of the High-Tc Phase in the Bi-Pb-Sr-Ca-Cu-O System. Journal of the Japan Society of Powder and Powder Metallurgy, 37(1), 54-59. https://doi.org/10.2497/jjspm.37.54

Influence of Calcining Temperature on Formation of the High-Tc Phase in the Bi-Pb-Sr-Ca-Cu-O System. / Takada, Jun; Egi, Toshio; Oda, Kiichi; Kitaguchi, Hitoshi; Osaka, Akiyoshi; Miura, Yoshinari; Ito, Hiroyuki; Ikeda, Yasunori; Takano, Mikio.

In: Journal of the Japan Society of Powder and Powder Metallurgy, Vol. 37, No. 1, 1990, p. 54-59.

Research output: Contribution to journal › Article

@article{41a65f65d5d94b9fab2b73a09c451f91,

title = "Influence of Calcining Temperature on Formation of the High-Tc Phase in the Bi-Pb-Sr-Ca-Cu-O System",

abstract = "The influence of the calcining temperature on the formation of the high-Tc phase and the electrical conductivity has been studied for the sample with a nominal composition of Bi0.96Pbg0.24Sr1.0Ca1.6Ox. the product in the sample calcined at 680°C was much different from that in the sample calcined at 800°C. Namely, Bi0.46Ca0.54-ySry1.1Ox(0.110Ca7O22, Ca2PbO4, SrCO3 and CuO were formed at 680°C, while the low-Tc phase and Ca2PbO4 were mainly formed at 800°C. At 850°C, the fraction of the high-Tc phase increased more quickly in the sample calcined at 680°C than in the sample calcined at 800°C, and mostly monophasic high-Tc phase was obtained by the sintering at 850°C for 24h after the calcination at 680°C, however, that sample showed lower Tc(zero)=87K than the sample calcined at 800°C.",

author = "Jun Takada and Toshio Egi and Kiichi Oda and Hitoshi Kitaguchi and Akiyoshi Osaka and Yoshinari Miura and Hiroyuki Ito and Yasunori Ikeda and Mikio Takano",

year = "1990",

doi = "10.2497/jjspm.37.54",

language = "English",

volume = "37",

pages = "54--59",

journal = "Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy",

issn = "0532-8799",

publisher = "Funtai Funamtsu Yakin Kyokai/Japan Soc. of Powder Metallurgy",

number = "1",

}

TY - JOUR

T1 - Influence of Calcining Temperature on Formation of the High-Tc Phase in the Bi-Pb-Sr-Ca-Cu-O System

AU - Takada, Jun

AU - Egi, Toshio

AU - Oda, Kiichi

AU - Kitaguchi, Hitoshi

AU - Osaka, Akiyoshi

AU - Miura, Yoshinari

AU - Ito, Hiroyuki

AU - Ikeda, Yasunori

AU - Takano, Mikio

PY - 1990

Y1 - 1990

N2 - The influence of the calcining temperature on the formation of the high-Tc phase and the electrical conductivity has been studied for the sample with a nominal composition of Bi0.96Pbg0.24Sr1.0Ca1.6Ox. the product in the sample calcined at 680°C was much different from that in the sample calcined at 800°C. Namely, Bi0.46Ca0.54-ySry1.1Ox(0.110Ca7O22, Ca2PbO4, SrCO3 and CuO were formed at 680°C, while the low-Tc phase and Ca2PbO4 were mainly formed at 800°C. At 850°C, the fraction of the high-Tc phase increased more quickly in the sample calcined at 680°C than in the sample calcined at 800°C, and mostly monophasic high-Tc phase was obtained by the sintering at 850°C for 24h after the calcination at 680°C, however, that sample showed lower Tc(zero)=87K than the sample calcined at 800°C.

AB - The influence of the calcining temperature on the formation of the high-Tc phase and the electrical conductivity has been studied for the sample with a nominal composition of Bi0.96Pbg0.24Sr1.0Ca1.6Ox. the product in the sample calcined at 680°C was much different from that in the sample calcined at 800°C. Namely, Bi0.46Ca0.54-ySry1.1Ox(0.110Ca7O22, Ca2PbO4, SrCO3 and CuO were formed at 680°C, while the low-Tc phase and Ca2PbO4 were mainly formed at 800°C. At 850°C, the fraction of the high-Tc phase increased more quickly in the sample calcined at 680°C than in the sample calcined at 800°C, and mostly monophasic high-Tc phase was obtained by the sintering at 850°C for 24h after the calcination at 680°C, however, that sample showed lower Tc(zero)=87K than the sample calcined at 800°C.

UR - http://www.scopus.com/inward/record.url?scp=0025229948&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0025229948&partnerID=8YFLogxK

U2 - 10.2497/jjspm.37.54

DO - 10.2497/jjspm.37.54

M3 - Article

AN - SCOPUS:0025229948

VL - 37

SP - 54

EP - 59

JO - Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy

JF - Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy

SN - 0532-8799

IS - 1

ER -