Influence of Bauschinger effect and anisotropy on springback of aluminum alloy sheets

Takeshi Uemori, Satoshi Sumikawa, Tetsuo Naka, Ninshu Ma, Fusahito Yoshida

Research output: Contribution to journalArticle

Abstract

For accurate springback calculations, the development of accurate constitutive equation ''Yoshida-Uemori model'' must always be taken into account. However, several springback calculations of other sheet metals by Yoshida-Uemori model have shown wrong agreements with the corresponding experimental data. The reason is why most of them have been calculated from the view point of the accuracy of Bauschinger effect without the strong anisotropy of sheet metal. In the present paper, we have investigated how the initial anisotropy affects the amount of springback for aluminum sheet metals with Bauschinger effect. Specifically, hat bending experiments in R.D. and T.D. were compared with the corresponding calculations. From the above mentioned comparisons, we found that the optimum combination of an anisotropic yield functions and Yoshida-Uemori model is very important for accurate springback analysis.

Original languageEnglish
Pages (from-to)921-926
Number of pages6
JournalMaterials Transactions
Volume58
Issue number6
DOIs
Publication statusPublished - 2017

Fingerprint

Bauschinger effect
metal sheets
Sheet metal
aluminum alloys
Aluminum alloys
Anisotropy
anisotropy
Aluminum sheet
constitutive equations
Constitutive equations
aluminum
Experiments

Keywords

  • Aluminum alloy sheet
  • Anisotropic yield function
  • Bending
  • Springback
  • Yoshida-Uemori model

ASJC Scopus subject areas

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering

Cite this

Influence of Bauschinger effect and anisotropy on springback of aluminum alloy sheets. / Uemori, Takeshi; Sumikawa, Satoshi; Naka, Tetsuo; Ma, Ninshu; Yoshida, Fusahito.

In: Materials Transactions, Vol. 58, No. 6, 2017, p. 921-926.

Research output: Contribution to journalArticle

Uemori, Takeshi ; Sumikawa, Satoshi ; Naka, Tetsuo ; Ma, Ninshu ; Yoshida, Fusahito. / Influence of Bauschinger effect and anisotropy on springback of aluminum alloy sheets. In: Materials Transactions. 2017 ; Vol. 58, No. 6. pp. 921-926.
@article{924563906fc1423d88fd6b8de09ee7fd,
title = "Influence of Bauschinger effect and anisotropy on springback of aluminum alloy sheets",
abstract = "For accurate springback calculations, the development of accurate constitutive equation ''Yoshida-Uemori model'' must always be taken into account. However, several springback calculations of other sheet metals by Yoshida-Uemori model have shown wrong agreements with the corresponding experimental data. The reason is why most of them have been calculated from the view point of the accuracy of Bauschinger effect without the strong anisotropy of sheet metal. In the present paper, we have investigated how the initial anisotropy affects the amount of springback for aluminum sheet metals with Bauschinger effect. Specifically, hat bending experiments in R.D. and T.D. were compared with the corresponding calculations. From the above mentioned comparisons, we found that the optimum combination of an anisotropic yield functions and Yoshida-Uemori model is very important for accurate springback analysis.",
keywords = "Aluminum alloy sheet, Anisotropic yield function, Bending, Springback, Yoshida-Uemori model",
author = "Takeshi Uemori and Satoshi Sumikawa and Tetsuo Naka and Ninshu Ma and Fusahito Yoshida",
year = "2017",
doi = "10.2320/matertrans.L-M2017812",
language = "English",
volume = "58",
pages = "921--926",
journal = "Materials Transactions",
issn = "1345-9678",
publisher = "Japan Institute of Metals (JIM)",
number = "6",

}

TY - JOUR

T1 - Influence of Bauschinger effect and anisotropy on springback of aluminum alloy sheets

AU - Uemori, Takeshi

AU - Sumikawa, Satoshi

AU - Naka, Tetsuo

AU - Ma, Ninshu

AU - Yoshida, Fusahito

PY - 2017

Y1 - 2017

N2 - For accurate springback calculations, the development of accurate constitutive equation ''Yoshida-Uemori model'' must always be taken into account. However, several springback calculations of other sheet metals by Yoshida-Uemori model have shown wrong agreements with the corresponding experimental data. The reason is why most of them have been calculated from the view point of the accuracy of Bauschinger effect without the strong anisotropy of sheet metal. In the present paper, we have investigated how the initial anisotropy affects the amount of springback for aluminum sheet metals with Bauschinger effect. Specifically, hat bending experiments in R.D. and T.D. were compared with the corresponding calculations. From the above mentioned comparisons, we found that the optimum combination of an anisotropic yield functions and Yoshida-Uemori model is very important for accurate springback analysis.

AB - For accurate springback calculations, the development of accurate constitutive equation ''Yoshida-Uemori model'' must always be taken into account. However, several springback calculations of other sheet metals by Yoshida-Uemori model have shown wrong agreements with the corresponding experimental data. The reason is why most of them have been calculated from the view point of the accuracy of Bauschinger effect without the strong anisotropy of sheet metal. In the present paper, we have investigated how the initial anisotropy affects the amount of springback for aluminum sheet metals with Bauschinger effect. Specifically, hat bending experiments in R.D. and T.D. were compared with the corresponding calculations. From the above mentioned comparisons, we found that the optimum combination of an anisotropic yield functions and Yoshida-Uemori model is very important for accurate springback analysis.

KW - Aluminum alloy sheet

KW - Anisotropic yield function

KW - Bending

KW - Springback

KW - Yoshida-Uemori model

UR - http://www.scopus.com/inward/record.url?scp=85019565707&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85019565707&partnerID=8YFLogxK

U2 - 10.2320/matertrans.L-M2017812

DO - 10.2320/matertrans.L-M2017812

M3 - Article

VL - 58

SP - 921

EP - 926

JO - Materials Transactions

JF - Materials Transactions

SN - 1345-9678

IS - 6

ER -