Improvement of the mixer-type powder disperser

Kuniaki Gotoh, Toshihiro Yoshida, Hiroaki Masuda

Research output: Contribution to journalArticle

6 Citations (Scopus)

Abstract

The performance of the mixer-type disperser has been studied experimentally with particular attention to the effect of the height of the vessel and the length of the inlet tube. The measurement of the particle residence time revealed that the vertical velocity component of the flow in the double-walled section constructed by the vessel and the inlet tube has a constant value. The short cut of particles from the inlet tube to the outlet tube occurred at the space between the inlet tube and the impeller. The experimental results of the newly designed dispersers revealed that the double-walled section and the space below the inlet tube caused deterioration of the dispersion performance. The double-walled section caused the agglomeration of the dispersed particles. On the other hand, the space below the inlet tube caused the particle short cut from inlet to outlet resulting in the discharge of agglomerated particles without experiencing the dispersing action.

Original languageEnglish
Pages (from-to)323-337
Number of pages15
JournalAdvanced Powder Technology
Volume5
Issue number4
DOIs
Publication statusPublished - 1994
Externally publishedYes

ASJC Scopus subject areas

  • Chemical Engineering(all)
  • Mechanics of Materials

Fingerprint Dive into the research topics of 'Improvement of the mixer-type powder disperser'. Together they form a unique fingerprint.

  • Cite this