High voltage screening on ceramics parts with bimodal strength distribution

K. Endo, Akira Kishimoto, N. Motohira, Y. Nakamura, H. Yanagida

Research output: Contribution to journalArticle

3 Citations (Scopus)

Abstract

The effect of high voltage screening on ceramics parts composed of titania ceramics with relative densities of 60 and 90%, was examined. Before screening, strength distribution was clearly discriminated into two regions, high strength region and low strength region. The dielectric strength was measured on the low strength samples, and the electric field below which all of the low strength parts would break was estimated as a screening field. After electric screening, the mechanical strength was measured and compared with the original one. Ceramic parts composed of only high strength region were obtained by eliminating the low strength parts electrically.

Original languageEnglish
Pages (from-to)1090-1092
Number of pages3
JournalNippon Seramikkusu Kyokai Gakujutsu Ronbunshi/Journal of the Ceramic Society of Japan
Volume103
Issue number1202
Publication statusPublished - Oct 1995
Externally publishedYes

Fingerprint

high voltages
Screening
screening
ceramics
Electric potential
high strength
Strength of materials
Titanium
Electric fields
titanium
electric fields

ASJC Scopus subject areas

  • Ceramics and Composites

Cite this

High voltage screening on ceramics parts with bimodal strength distribution. / Endo, K.; Kishimoto, Akira; Motohira, N.; Nakamura, Y.; Yanagida, H.

In: Nippon Seramikkusu Kyokai Gakujutsu Ronbunshi/Journal of the Ceramic Society of Japan, Vol. 103, No. 1202, 10.1995, p. 1090-1092.

Research output: Contribution to journalArticle

@article{ff32e5b8245a452bb301a57078130f34,
title = "High voltage screening on ceramics parts with bimodal strength distribution",
abstract = "The effect of high voltage screening on ceramics parts composed of titania ceramics with relative densities of 60 and 90{\%}, was examined. Before screening, strength distribution was clearly discriminated into two regions, high strength region and low strength region. The dielectric strength was measured on the low strength samples, and the electric field below which all of the low strength parts would break was estimated as a screening field. After electric screening, the mechanical strength was measured and compared with the original one. Ceramic parts composed of only high strength region were obtained by eliminating the low strength parts electrically.",
author = "K. Endo and Akira Kishimoto and N. Motohira and Y. Nakamura and H. Yanagida",
year = "1995",
month = "10",
language = "English",
volume = "103",
pages = "1090--1092",
journal = "Nippon Seramikkusu Kyokai Gakujutsu Ronbunshi/Journal of the Ceramic Society of Japan",
issn = "1882-0743",
publisher = "Ceramic Society of Japan/Nippon Seramikkusu Kyokai",
number = "1202",

}

TY - JOUR

T1 - High voltage screening on ceramics parts with bimodal strength distribution

AU - Endo, K.

AU - Kishimoto, Akira

AU - Motohira, N.

AU - Nakamura, Y.

AU - Yanagida, H.

PY - 1995/10

Y1 - 1995/10

N2 - The effect of high voltage screening on ceramics parts composed of titania ceramics with relative densities of 60 and 90%, was examined. Before screening, strength distribution was clearly discriminated into two regions, high strength region and low strength region. The dielectric strength was measured on the low strength samples, and the electric field below which all of the low strength parts would break was estimated as a screening field. After electric screening, the mechanical strength was measured and compared with the original one. Ceramic parts composed of only high strength region were obtained by eliminating the low strength parts electrically.

AB - The effect of high voltage screening on ceramics parts composed of titania ceramics with relative densities of 60 and 90%, was examined. Before screening, strength distribution was clearly discriminated into two regions, high strength region and low strength region. The dielectric strength was measured on the low strength samples, and the electric field below which all of the low strength parts would break was estimated as a screening field. After electric screening, the mechanical strength was measured and compared with the original one. Ceramic parts composed of only high strength region were obtained by eliminating the low strength parts electrically.

UR - http://www.scopus.com/inward/record.url?scp=0029388585&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0029388585&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:0029423665

VL - 103

SP - 1090

EP - 1092

JO - Nippon Seramikkusu Kyokai Gakujutsu Ronbunshi/Journal of the Ceramic Society of Japan

JF - Nippon Seramikkusu Kyokai Gakujutsu Ronbunshi/Journal of the Ceramic Society of Japan

SN - 1882-0743

IS - 1202

ER -