Grinding Process of Partially Stabilized Zirconia

Toshikatsu Nakajima, Yoshiyuki Uno, Takanori Fujiwara, Atsunori Ikejiri

Research output: Contribution to journalArticle

Abstract

Cylindrical plunge grinding process and chip formation mechanism of normally sintered and partially stabilized zirconia are experimentally investigated with bronze bond diamond wheel, analyzing grinding force, surface roughness, wheel wear, grinding chips and so on. A new technique for better surface finish is introduced in which readjustment truing with an impregnated dresser is performed after dressing of diamond wheel with GC wheel. Main conclusions obtained in this study are as follows: (1) In a cylindrical plunge grinding cycle of partially stabilized zirconia with bronze bond diamond wheel, there are three distinct grinding states such as spark-in, steady and spark-out just as in grinding metallic materials. (2) Readjustment truing technique leads to better surface finish and higher grinding force as compared with those in dressing with GC wheel. (3) Grinding force increases with an increase of setting depth of cut, while surface roughness is hardly influenced by setting depth of cut. (4) Chip formation in grinding partially stabilized zirconia is primarily predominated by plastic deformation as in grinding metals.

Original languageEnglish
Pages (from-to)449-454
Number of pages6
JournalJournal of the Japan Society for Precision Engineering
Volume53
Issue number3
DOIs
Publication statusPublished - Jan 1 1987
Externally publishedYes

Keywords

  • bronze bond diamond wheel
  • chip formation mechanism
  • grinding process
  • impregnated dresser
  • partially stabilized zirconia
  • plastic deformation
  • readjustment truing
  • surface finish

ASJC Scopus subject areas

  • Mechanical Engineering

Fingerprint Dive into the research topics of 'Grinding Process of Partially Stabilized Zirconia'. Together they form a unique fingerprint.

Cite this