Formation of hydroxyapatite on CaSiO3 powders in simulated body fluid

Punnama Siriphannon, Yoshikazu Kameshima, Atsuo Yasumori, Kiyoshi Okada, Shigeo Hayashi

Research output: Contribution to journalArticle

161 Citations (Scopus)

Abstract

CaSiO3 powders were prepared from ethanol solutions of Ca(NO3)2·4H2O and Si(OC2H5)4 using NaOH as a precipitant. The resultant powders were heated at three different temperature regimes, (1) 500°C, (2) 500 and 1000°C and (3) 500 and 1400°C, to obtain the amorphous phase (amorphous-CS), low temperature phase (β-CS), and high temperature phase (α-CS) of CaSiO3, respectively. The different amorphous and crystalline phases exhibited different microtextures and specific surface areas of the powders. The rough, porous particles of amorphous-CS and β-CS have higher specific surface areas than the smooth, dense particles of α-CS. These CaSiO3 powders were soaked in a simulated body fluid (SBF) at 36.5°C for 2 h to 30 days. Formation of hydroxyapatite (HAp) was observed on the surfaces of all samples, but the formation behavior and microstructures were different, resulting the differences in microstructure and crystal structure of the starting powders as well as particle size and specific surface area. The HAp formed on the amorphous-CS was a loose porous layer consisting of uniformly-sized tiny ball-like agglomerated particles, while that formed on the β-CS and α-CS was a dense layer consisting of larger ball-like agglomerated particles.

Original languageEnglish
Pages (from-to)511-520
Number of pages10
JournalJournal of the European Ceramic Society
Volume22
Issue number4
DOIs
Publication statusPublished - Apr 2002
Externally publishedYes

Fingerprint

Body fluids
Durapatite
Hydroxyapatite
Powders
Specific surface area
Microstructure
Temperature
Ethanol
Crystal structure
Particle size
Crystalline materials

Keywords

  • Apatite
  • Bioactive materials
  • CaSiO powders
  • Simulated body fluid (SBF)

ASJC Scopus subject areas

  • Ceramics and Composites

Cite this

Formation of hydroxyapatite on CaSiO3 powders in simulated body fluid. / Siriphannon, Punnama; Kameshima, Yoshikazu; Yasumori, Atsuo; Okada, Kiyoshi; Hayashi, Shigeo.

In: Journal of the European Ceramic Society, Vol. 22, No. 4, 04.2002, p. 511-520.

Research output: Contribution to journalArticle

Siriphannon, Punnama ; Kameshima, Yoshikazu ; Yasumori, Atsuo ; Okada, Kiyoshi ; Hayashi, Shigeo. / Formation of hydroxyapatite on CaSiO3 powders in simulated body fluid. In: Journal of the European Ceramic Society. 2002 ; Vol. 22, No. 4. pp. 511-520.
@article{a5c113599e674037a33fc8396daaa48f,
title = "Formation of hydroxyapatite on CaSiO3 powders in simulated body fluid",
abstract = "CaSiO3 powders were prepared from ethanol solutions of Ca(NO3)2·4H2O and Si(OC2H5)4 using NaOH as a precipitant. The resultant powders were heated at three different temperature regimes, (1) 500°C, (2) 500 and 1000°C and (3) 500 and 1400°C, to obtain the amorphous phase (amorphous-CS), low temperature phase (β-CS), and high temperature phase (α-CS) of CaSiO3, respectively. The different amorphous and crystalline phases exhibited different microtextures and specific surface areas of the powders. The rough, porous particles of amorphous-CS and β-CS have higher specific surface areas than the smooth, dense particles of α-CS. These CaSiO3 powders were soaked in a simulated body fluid (SBF) at 36.5°C for 2 h to 30 days. Formation of hydroxyapatite (HAp) was observed on the surfaces of all samples, but the formation behavior and microstructures were different, resulting the differences in microstructure and crystal structure of the starting powders as well as particle size and specific surface area. The HAp formed on the amorphous-CS was a loose porous layer consisting of uniformly-sized tiny ball-like agglomerated particles, while that formed on the β-CS and α-CS was a dense layer consisting of larger ball-like agglomerated particles.",
keywords = "Apatite, Bioactive materials, CaSiO powders, Simulated body fluid (SBF)",
author = "Punnama Siriphannon and Yoshikazu Kameshima and Atsuo Yasumori and Kiyoshi Okada and Shigeo Hayashi",
year = "2002",
month = "4",
doi = "10.1016/S0955-2219(01)00301-6",
language = "English",
volume = "22",
pages = "511--520",
journal = "Journal of the European Ceramic Society",
issn = "0955-2219",
publisher = "Elsevier BV",
number = "4",

}

TY - JOUR

T1 - Formation of hydroxyapatite on CaSiO3 powders in simulated body fluid

AU - Siriphannon, Punnama

AU - Kameshima, Yoshikazu

AU - Yasumori, Atsuo

AU - Okada, Kiyoshi

AU - Hayashi, Shigeo

PY - 2002/4

Y1 - 2002/4

N2 - CaSiO3 powders were prepared from ethanol solutions of Ca(NO3)2·4H2O and Si(OC2H5)4 using NaOH as a precipitant. The resultant powders were heated at three different temperature regimes, (1) 500°C, (2) 500 and 1000°C and (3) 500 and 1400°C, to obtain the amorphous phase (amorphous-CS), low temperature phase (β-CS), and high temperature phase (α-CS) of CaSiO3, respectively. The different amorphous and crystalline phases exhibited different microtextures and specific surface areas of the powders. The rough, porous particles of amorphous-CS and β-CS have higher specific surface areas than the smooth, dense particles of α-CS. These CaSiO3 powders were soaked in a simulated body fluid (SBF) at 36.5°C for 2 h to 30 days. Formation of hydroxyapatite (HAp) was observed on the surfaces of all samples, but the formation behavior and microstructures were different, resulting the differences in microstructure and crystal structure of the starting powders as well as particle size and specific surface area. The HAp formed on the amorphous-CS was a loose porous layer consisting of uniformly-sized tiny ball-like agglomerated particles, while that formed on the β-CS and α-CS was a dense layer consisting of larger ball-like agglomerated particles.

AB - CaSiO3 powders were prepared from ethanol solutions of Ca(NO3)2·4H2O and Si(OC2H5)4 using NaOH as a precipitant. The resultant powders were heated at three different temperature regimes, (1) 500°C, (2) 500 and 1000°C and (3) 500 and 1400°C, to obtain the amorphous phase (amorphous-CS), low temperature phase (β-CS), and high temperature phase (α-CS) of CaSiO3, respectively. The different amorphous and crystalline phases exhibited different microtextures and specific surface areas of the powders. The rough, porous particles of amorphous-CS and β-CS have higher specific surface areas than the smooth, dense particles of α-CS. These CaSiO3 powders were soaked in a simulated body fluid (SBF) at 36.5°C for 2 h to 30 days. Formation of hydroxyapatite (HAp) was observed on the surfaces of all samples, but the formation behavior and microstructures were different, resulting the differences in microstructure and crystal structure of the starting powders as well as particle size and specific surface area. The HAp formed on the amorphous-CS was a loose porous layer consisting of uniformly-sized tiny ball-like agglomerated particles, while that formed on the β-CS and α-CS was a dense layer consisting of larger ball-like agglomerated particles.

KW - Apatite

KW - Bioactive materials

KW - CaSiO powders

KW - Simulated body fluid (SBF)

UR - http://www.scopus.com/inward/record.url?scp=0036532871&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0036532871&partnerID=8YFLogxK

U2 - 10.1016/S0955-2219(01)00301-6

DO - 10.1016/S0955-2219(01)00301-6

M3 - Article

AN - SCOPUS:0036532871

VL - 22

SP - 511

EP - 520

JO - Journal of the European Ceramic Society

JF - Journal of the European Ceramic Society

SN - 0955-2219

IS - 4

ER -