Flux measurements of O2, CO2 and NO in an oil furnace

Yuji Ikeda, Nobuyuki Kawahara, Tsuyoshi Nakajima

Research output: Contribution to journalArticlepeer-review

10 Citations (Scopus)

Abstract

The flow velocity measurements and flux measurements of the gas species O2, CO2 and NO in an oil furnace were carried out. The velocity profiles in combustion and non-combustion were measured by the developed laser Doppler velocimeter, and the results show that the reversing flow regions for both cases were located at the same place and their volumes were almost equal. The comparisons of measured concentration and flux obtained using velocity and temperature were performed in spray combustion. The results show that there is little difference in the flame region but a large discrepancy outside the flame region. The generated gas species in the flame and their convection outside the flame were discretized, and the application of flux in spray combustion research was found to be very useful and effective.

Original languageEnglish
Article number019
Pages (from-to)826-832
Number of pages7
JournalMeasurement Science and Technology
Volume6
Issue number6
DOIs
Publication statusPublished - Dec 1 1995
Externally publishedYes

ASJC Scopus subject areas

  • Instrumentation
  • Engineering (miscellaneous)
  • Applied Mathematics

Fingerprint Dive into the research topics of 'Flux measurements of O<sub>2</sub>, CO<sub>2</sub> and NO in an oil furnace'. Together they form a unique fingerprint.

Cite this