Fabrication of YBa2Cu3O7-x films on buffered metal tapes fired at low temperature by MOD method using trifluoroacetate salts

T. Araki, Y. Takahashi, K. Yamagiwa, T. Yuasa, Y. Iijima, K. Takeda, Seok Beom Kim, Y. Yamada, I. Hirabayashi

Research output: Contribution to journalArticle

32 Citations (Scopus)

Abstract

Metalorganic deposition (MOD) using trifluoroacetates is considered to be one of the most promising methods for coated conductors, because it enables us to obtain very high Jc films with low-cost facilities. We have optimized various processing conditions in this method and successfully obtained critical current density (Jc) of 4.1MA/cm2 (77K, 0T) for the YBa2Cu3O7-x (YBCO) film of 1800Å in thickness on CeO2 buffered YSZ single crystal, which was fired at 800°C. In the case of YBCO films on buffered metallic substrates, it is difficult to fabricate under the same deposition condition. Then low temperature heat treatment is required for deposition on metal substrate. On the other hand, such heat treatment also permits non-reacted BaF2 in fired film, that leads to low Jc of the film. Therefore it is the key to fabricate YBCO film with entire reaction of BaF2 by the low temperature heat treatment. We have investigated chemical reactions in firing and established a firing profile to fabricate YBCO film even at 725°C. With this profile, we can successfully fabricate the YBCO film at 725°C on CeO2 buffered YSZ single crystal which has Jc of 3.0MA/cm2 and the YBCO film on CeO2 (sputtered) / YSZ (Ion-beam-assisted deposition: IBAD) buffered Ni based alloy (hastelloy) tape which has Jc of 0.81MA/cm2.

Original languageEnglish
Pages (from-to)2869-2872
Number of pages4
JournalIEEE Transactions on Applied Superconductivity
Volume11
Issue number1 III
DOIs
Publication statusPublished - Mar 2001
Externally publishedYes

Fingerprint

Trifluoroacetic Acid
Tapes
tapes
Salts
Metals
salts
Fabrication
fabrication
metals
yttria-stabilized zirconia
Temperature
Low temperature operations
Ion beam assisted deposition
heat treatment
Single crystals
Hastelloy (trademark)
barium copper yttrium oxide
single crystals
Substrates
profiles

Keywords

  • BaF
  • Buffer layer
  • Metalorganic deposition
  • Trifluoroacetate
  • YBCO film

ASJC Scopus subject areas

  • Electrical and Electronic Engineering
  • Physics and Astronomy (miscellaneous)

Cite this

Fabrication of YBa2Cu3O7-x films on buffered metal tapes fired at low temperature by MOD method using trifluoroacetate salts. / Araki, T.; Takahashi, Y.; Yamagiwa, K.; Yuasa, T.; Iijima, Y.; Takeda, K.; Kim, Seok Beom; Yamada, Y.; Hirabayashi, I.

In: IEEE Transactions on Applied Superconductivity, Vol. 11, No. 1 III, 03.2001, p. 2869-2872.

Research output: Contribution to journalArticle

Araki, T, Takahashi, Y, Yamagiwa, K, Yuasa, T, Iijima, Y, Takeda, K, Kim, SB, Yamada, Y & Hirabayashi, I 2001, 'Fabrication of YBa2Cu3O7-x films on buffered metal tapes fired at low temperature by MOD method using trifluoroacetate salts', IEEE Transactions on Applied Superconductivity, vol. 11, no. 1 III, pp. 2869-2872. https://doi.org/10.1109/77.919661
Araki, T. ; Takahashi, Y. ; Yamagiwa, K. ; Yuasa, T. ; Iijima, Y. ; Takeda, K. ; Kim, Seok Beom ; Yamada, Y. ; Hirabayashi, I. / Fabrication of YBa2Cu3O7-x films on buffered metal tapes fired at low temperature by MOD method using trifluoroacetate salts. In: IEEE Transactions on Applied Superconductivity. 2001 ; Vol. 11, No. 1 III. pp. 2869-2872.
@article{ae0fdbe4a3ea48059bc024abe91eb932,
title = "Fabrication of YBa2Cu3O7-x films on buffered metal tapes fired at low temperature by MOD method using trifluoroacetate salts",
abstract = "Metalorganic deposition (MOD) using trifluoroacetates is considered to be one of the most promising methods for coated conductors, because it enables us to obtain very high Jc films with low-cost facilities. We have optimized various processing conditions in this method and successfully obtained critical current density (Jc) of 4.1MA/cm2 (77K, 0T) for the YBa2Cu3O7-x (YBCO) film of 1800{\AA} in thickness on CeO2 buffered YSZ single crystal, which was fired at 800°C. In the case of YBCO films on buffered metallic substrates, it is difficult to fabricate under the same deposition condition. Then low temperature heat treatment is required for deposition on metal substrate. On the other hand, such heat treatment also permits non-reacted BaF2 in fired film, that leads to low Jc of the film. Therefore it is the key to fabricate YBCO film with entire reaction of BaF2 by the low temperature heat treatment. We have investigated chemical reactions in firing and established a firing profile to fabricate YBCO film even at 725°C. With this profile, we can successfully fabricate the YBCO film at 725°C on CeO2 buffered YSZ single crystal which has Jc of 3.0MA/cm2 and the YBCO film on CeO2 (sputtered) / YSZ (Ion-beam-assisted deposition: IBAD) buffered Ni based alloy (hastelloy) tape which has Jc of 0.81MA/cm2.",
keywords = "BaF, Buffer layer, Metalorganic deposition, Trifluoroacetate, YBCO film",
author = "T. Araki and Y. Takahashi and K. Yamagiwa and T. Yuasa and Y. Iijima and K. Takeda and Kim, {Seok Beom} and Y. Yamada and I. Hirabayashi",
year = "2001",
month = "3",
doi = "10.1109/77.919661",
language = "English",
volume = "11",
pages = "2869--2872",
journal = "IEEE Transactions on Applied Superconductivity",
issn = "1051-8223",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
number = "1 III",

}

TY - JOUR

T1 - Fabrication of YBa2Cu3O7-x films on buffered metal tapes fired at low temperature by MOD method using trifluoroacetate salts

AU - Araki, T.

AU - Takahashi, Y.

AU - Yamagiwa, K.

AU - Yuasa, T.

AU - Iijima, Y.

AU - Takeda, K.

AU - Kim, Seok Beom

AU - Yamada, Y.

AU - Hirabayashi, I.

PY - 2001/3

Y1 - 2001/3

N2 - Metalorganic deposition (MOD) using trifluoroacetates is considered to be one of the most promising methods for coated conductors, because it enables us to obtain very high Jc films with low-cost facilities. We have optimized various processing conditions in this method and successfully obtained critical current density (Jc) of 4.1MA/cm2 (77K, 0T) for the YBa2Cu3O7-x (YBCO) film of 1800Å in thickness on CeO2 buffered YSZ single crystal, which was fired at 800°C. In the case of YBCO films on buffered metallic substrates, it is difficult to fabricate under the same deposition condition. Then low temperature heat treatment is required for deposition on metal substrate. On the other hand, such heat treatment also permits non-reacted BaF2 in fired film, that leads to low Jc of the film. Therefore it is the key to fabricate YBCO film with entire reaction of BaF2 by the low temperature heat treatment. We have investigated chemical reactions in firing and established a firing profile to fabricate YBCO film even at 725°C. With this profile, we can successfully fabricate the YBCO film at 725°C on CeO2 buffered YSZ single crystal which has Jc of 3.0MA/cm2 and the YBCO film on CeO2 (sputtered) / YSZ (Ion-beam-assisted deposition: IBAD) buffered Ni based alloy (hastelloy) tape which has Jc of 0.81MA/cm2.

AB - Metalorganic deposition (MOD) using trifluoroacetates is considered to be one of the most promising methods for coated conductors, because it enables us to obtain very high Jc films with low-cost facilities. We have optimized various processing conditions in this method and successfully obtained critical current density (Jc) of 4.1MA/cm2 (77K, 0T) for the YBa2Cu3O7-x (YBCO) film of 1800Å in thickness on CeO2 buffered YSZ single crystal, which was fired at 800°C. In the case of YBCO films on buffered metallic substrates, it is difficult to fabricate under the same deposition condition. Then low temperature heat treatment is required for deposition on metal substrate. On the other hand, such heat treatment also permits non-reacted BaF2 in fired film, that leads to low Jc of the film. Therefore it is the key to fabricate YBCO film with entire reaction of BaF2 by the low temperature heat treatment. We have investigated chemical reactions in firing and established a firing profile to fabricate YBCO film even at 725°C. With this profile, we can successfully fabricate the YBCO film at 725°C on CeO2 buffered YSZ single crystal which has Jc of 3.0MA/cm2 and the YBCO film on CeO2 (sputtered) / YSZ (Ion-beam-assisted deposition: IBAD) buffered Ni based alloy (hastelloy) tape which has Jc of 0.81MA/cm2.

KW - BaF

KW - Buffer layer

KW - Metalorganic deposition

KW - Trifluoroacetate

KW - YBCO film

UR - http://www.scopus.com/inward/record.url?scp=0035269159&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0035269159&partnerID=8YFLogxK

U2 - 10.1109/77.919661

DO - 10.1109/77.919661

M3 - Article

AN - SCOPUS:0035269159

VL - 11

SP - 2869

EP - 2872

JO - IEEE Transactions on Applied Superconductivity

JF - IEEE Transactions on Applied Superconductivity

SN - 1051-8223

IS - 1 III

ER -