Fabrication of a TiO2-based solid-state cell with an organic polymer as a sensitizer

Prasad M. Sirimanne; Tetsuo Soga; Yasuhiko Hayashi; Takashi Jimbo

doi:10.1143/JJAP.41.L147

Fabrication of a TiO₂-based solid-state cell with an organic polymer as a sensitizer

Prasad M. Sirimanne, Tetsuo Soga, Yasuhiko Hayashi, Takashi Jimbo

Research output: Contribution to journal › Article › peer-review

Abstract

Poly [2-methoxy-5(2′-ethyl-hexyloxy)-p-phenylene vinylene] (MEH-PPV) was used as a sensitizer in a photovoltaic cell. The cell was fabricated by depositing MEH-PPV in between wide band gap n-TiO₂ and p-CuI films. A maximum open circuit voltage of 390 mV and short circuit current of 0.29 mA·-cm^-2 were observed for the TiO₂|MEH-PPV|CuI cell, under AM 1.5 conditions (100 mW·cm^-2 of white light illumination).

Original language	English
Pages (from-to)	L147-L148
Journal	Japanese Journal of Applied Physics, Part 2: Letters
Volume	41
Issue number	2 A
DOIs	https://doi.org/10.1143/JJAP.41.L147
Publication status	Published - Feb 1 2002
Externally published	Yes

Keywords

Cul
Poly [2-methoxy-5(2′-ethyl-hexyloxy)-p-phenylene vinylene]
Solid-state cell
TiO

ASJC Scopus subject areas

Engineering(all)
Physics and Astronomy (miscellaneous)
Physics and Astronomy(all)

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

Access to Document

10.1143/JJAP.41.L147

Cite this

@article{944ae14942b64292a8df74ab76e61b11,

title = "Fabrication of a TiO2-based solid-state cell with an organic polymer as a sensitizer",

abstract = "Poly [2-methoxy-5(2′-ethyl-hexyloxy)-p-phenylene vinylene] (MEH-PPV) was used as a sensitizer in a photovoltaic cell. The cell was fabricated by depositing MEH-PPV in between wide band gap n-TiO2 and p-CuI films. A maximum open circuit voltage of 390 mV and short circuit current of 0.29 mA·-cm-2 were observed for the TiO2|MEH-PPV|CuI cell, under AM 1.5 conditions (100 mW·cm-2 of white light illumination).",

keywords = "Cul, Poly [2-methoxy-5(2′-ethyl-hexyloxy)-p-phenylene vinylene], Solid-state cell, TiO",

author = "Sirimanne, {Prasad M.} and Tetsuo Soga and Yasuhiko Hayashi and Takashi Jimbo",

year = "2002",

month = feb,

day = "1",

doi = "10.1143/JJAP.41.L147",

language = "English",

volume = "41",

pages = "L147--L148",

journal = "Japanese Journal of Applied Physics, Part 2: Letters",

issn = "0021-4922",

number = "2 A",

}

TY - JOUR

T1 - Fabrication of a TiO2-based solid-state cell with an organic polymer as a sensitizer

AU - Sirimanne, Prasad M.

AU - Soga, Tetsuo

AU - Hayashi, Yasuhiko

AU - Jimbo, Takashi

PY - 2002/2/1

Y1 - 2002/2/1

N2 - Poly [2-methoxy-5(2′-ethyl-hexyloxy)-p-phenylene vinylene] (MEH-PPV) was used as a sensitizer in a photovoltaic cell. The cell was fabricated by depositing MEH-PPV in between wide band gap n-TiO2 and p-CuI films. A maximum open circuit voltage of 390 mV and short circuit current of 0.29 mA·-cm-2 were observed for the TiO2|MEH-PPV|CuI cell, under AM 1.5 conditions (100 mW·cm-2 of white light illumination).

AB - Poly [2-methoxy-5(2′-ethyl-hexyloxy)-p-phenylene vinylene] (MEH-PPV) was used as a sensitizer in a photovoltaic cell. The cell was fabricated by depositing MEH-PPV in between wide band gap n-TiO2 and p-CuI films. A maximum open circuit voltage of 390 mV and short circuit current of 0.29 mA·-cm-2 were observed for the TiO2|MEH-PPV|CuI cell, under AM 1.5 conditions (100 mW·cm-2 of white light illumination).

KW - Cul

KW - Poly [2-methoxy-5(2′-ethyl-hexyloxy)-p-phenylene vinylene]

KW - Solid-state cell

KW - TiO

UR - http://www.scopus.com/inward/record.url?scp=0036478678&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0036478678&partnerID=8YFLogxK

U2 - 10.1143/JJAP.41.L147

DO - 10.1143/JJAP.41.L147

M3 - Article

AN - SCOPUS:0036478678

SN - 0021-4922

VL - 41

SP - L147-L148

JO - Japanese Journal of Applied Physics, Part 2: Letters

JF - Japanese Journal of Applied Physics, Part 2: Letters

IS - 2 A

ER -