Fabrication of a polyimide film pneumatic actuator by molding and welding processes

Daisuke Yamaguchi, Tatsuya Hanaki, Yuji Ishino, Masaya Takasaki, Takeshi Mizuno

Research output: Contribution to journalArticlepeer-review

Abstract

The bellows pneumatic actuator, which is made by folding a non-stretch film, has been proposed for various applications because it is easy to fabricate and is extremely thin and light. However, it has subpar durability performance, especially in the folded part of the film. In this study, we propose an actuator with a pod structure that possesses high design flexibility and is free from folding. A method of molding a pod structure on a polyimide film was established and a pneumatic actuator was successfully fabricated by using PI films. Two types of PI film pneumatic actuators with the same curvature, bellows type, and pod type were fabricated. Both were confirmed to have equivalent output characteristics. The bending angle and generated torque of the pod-struc-ture actuator were 34° and 3.3 mNm, respectively. In addition, the pod structure has approximately twice the durability of the bellows structure. By using the fabrication method proposed in this pa-per, it is possible to realize an air chamber (i.e., an actuator) that has both high durability and bending motion.

Original languageEnglish
Article number177
JournalActuators
Volume10
Issue number8
DOIs
Publication statusPublished - Aug 2021

Keywords

  • Film
  • Filmotics
  • Molding
  • Pneumatic actuator
  • Polyimide
  • Soft robotics
  • Welding

ASJC Scopus subject areas

  • Control and Systems Engineering
  • Control and Optimization

Fingerprint

Dive into the research topics of 'Fabrication of a polyimide film pneumatic actuator by molding and welding processes'. Together they form a unique fingerprint.

Cite this