Experimental study of heat and mass recovery on steam generation in an adsorption heat pump with composite zeolite-CaCl2

Song Ye, Bing Xue, Xiangrui Meng, Xinli Wei, Koichi Nakaso, Jun Fukai

Research output: Contribution to journalArticle

Abstract

High-temperature steam generation in adsorption heat pump with composite zeolite-CaCl2 has been experimentally investigated by introducing heat and mass recovery. A direct contact heat exchange method is utilized to enhance the overall heat transfer rate. Composite zeolite (CZ) is prepared by immersing zeolite particle in CaCl2 solution at mass concentration of 40%. Cyclic experiment consists of two processes: regeneration with 130 °C dry air and steam generation with 80 °C hot water. The heat and mass recovery with steam below 90 °C is added before generation process. Mass of generated steam above 200 °C is increased by 9.12%. The effective time for steam generation is dramatically extended by 18.33%. Adsorption and thermal equilibriums inside the packed bed are achieved more quickly with heat and mass recovery. Gross temperature lift for one-stage adsorption heat pump is above 100 °C. Coefficient of performance for heating (COPh) and specific heat power (SHP) are elevated by 9.55% and 9.23%, respectively. The increase in mass of generated steam contributes to the improvement of COPh. Meanwhile, only a short time used for heat and mass recovery enables the rise in SHP.

Original languageEnglish
Article number101808
JournalSustainable Cities and Society
Volume52
DOIs
Publication statusPublished - Jan 1 2020

Fingerprint

heat pump
zeolite
heat
Steam
experimental study
Pumps
adsorption
Adsorption
Recovery
Composite materials
Specific heat
heating
Heating
Hot Temperature
Packed beds
heat transfer
performance
regeneration
air
contact

Keywords

  • Adsorption heat pump
  • Composite zeolite
  • Heat and mass recovery
  • Steam generation

ASJC Scopus subject areas

  • Geography, Planning and Development
  • Civil and Structural Engineering
  • Renewable Energy, Sustainability and the Environment
  • Transportation

Cite this

Experimental study of heat and mass recovery on steam generation in an adsorption heat pump with composite zeolite-CaCl2 . / Ye, Song; Xue, Bing; Meng, Xiangrui; Wei, Xinli; Nakaso, Koichi; Fukai, Jun.

In: Sustainable Cities and Society, Vol. 52, 101808, 01.01.2020.

Research output: Contribution to journalArticle

@article{9761c340ed70403591befcc4083b5a9f,
title = "Experimental study of heat and mass recovery on steam generation in an adsorption heat pump with composite zeolite-CaCl2",
abstract = "High-temperature steam generation in adsorption heat pump with composite zeolite-CaCl2 has been experimentally investigated by introducing heat and mass recovery. A direct contact heat exchange method is utilized to enhance the overall heat transfer rate. Composite zeolite (CZ) is prepared by immersing zeolite particle in CaCl2 solution at mass concentration of 40{\%}. Cyclic experiment consists of two processes: regeneration with 130 °C dry air and steam generation with 80 °C hot water. The heat and mass recovery with steam below 90 °C is added before generation process. Mass of generated steam above 200 °C is increased by 9.12{\%}. The effective time for steam generation is dramatically extended by 18.33{\%}. Adsorption and thermal equilibriums inside the packed bed are achieved more quickly with heat and mass recovery. Gross temperature lift for one-stage adsorption heat pump is above 100 °C. Coefficient of performance for heating (COPh) and specific heat power (SHP) are elevated by 9.55{\%} and 9.23{\%}, respectively. The increase in mass of generated steam contributes to the improvement of COPh. Meanwhile, only a short time used for heat and mass recovery enables the rise in SHP.",
keywords = "Adsorption heat pump, Composite zeolite, Heat and mass recovery, Steam generation",
author = "Song Ye and Bing Xue and Xiangrui Meng and Xinli Wei and Koichi Nakaso and Jun Fukai",
year = "2020",
month = "1",
day = "1",
doi = "10.1016/j.scs.2019.101808",
language = "English",
volume = "52",
journal = "Sustainable Cities and Society",
issn = "2210-6707",
publisher = "Elsevier BV",

}

TY - JOUR

T1 - Experimental study of heat and mass recovery on steam generation in an adsorption heat pump with composite zeolite-CaCl2

AU - Ye, Song

AU - Xue, Bing

AU - Meng, Xiangrui

AU - Wei, Xinli

AU - Nakaso, Koichi

AU - Fukai, Jun

PY - 2020/1/1

Y1 - 2020/1/1

N2 - High-temperature steam generation in adsorption heat pump with composite zeolite-CaCl2 has been experimentally investigated by introducing heat and mass recovery. A direct contact heat exchange method is utilized to enhance the overall heat transfer rate. Composite zeolite (CZ) is prepared by immersing zeolite particle in CaCl2 solution at mass concentration of 40%. Cyclic experiment consists of two processes: regeneration with 130 °C dry air and steam generation with 80 °C hot water. The heat and mass recovery with steam below 90 °C is added before generation process. Mass of generated steam above 200 °C is increased by 9.12%. The effective time for steam generation is dramatically extended by 18.33%. Adsorption and thermal equilibriums inside the packed bed are achieved more quickly with heat and mass recovery. Gross temperature lift for one-stage adsorption heat pump is above 100 °C. Coefficient of performance for heating (COPh) and specific heat power (SHP) are elevated by 9.55% and 9.23%, respectively. The increase in mass of generated steam contributes to the improvement of COPh. Meanwhile, only a short time used for heat and mass recovery enables the rise in SHP.

AB - High-temperature steam generation in adsorption heat pump with composite zeolite-CaCl2 has been experimentally investigated by introducing heat and mass recovery. A direct contact heat exchange method is utilized to enhance the overall heat transfer rate. Composite zeolite (CZ) is prepared by immersing zeolite particle in CaCl2 solution at mass concentration of 40%. Cyclic experiment consists of two processes: regeneration with 130 °C dry air and steam generation with 80 °C hot water. The heat and mass recovery with steam below 90 °C is added before generation process. Mass of generated steam above 200 °C is increased by 9.12%. The effective time for steam generation is dramatically extended by 18.33%. Adsorption and thermal equilibriums inside the packed bed are achieved more quickly with heat and mass recovery. Gross temperature lift for one-stage adsorption heat pump is above 100 °C. Coefficient of performance for heating (COPh) and specific heat power (SHP) are elevated by 9.55% and 9.23%, respectively. The increase in mass of generated steam contributes to the improvement of COPh. Meanwhile, only a short time used for heat and mass recovery enables the rise in SHP.

KW - Adsorption heat pump

KW - Composite zeolite

KW - Heat and mass recovery

KW - Steam generation

UR - http://www.scopus.com/inward/record.url?scp=85071451807&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85071451807&partnerID=8YFLogxK

U2 - 10.1016/j.scs.2019.101808

DO - 10.1016/j.scs.2019.101808

M3 - Article

VL - 52

JO - Sustainable Cities and Society

JF - Sustainable Cities and Society

SN - 2210-6707

M1 - 101808

ER -