Experimental modal analysis and shaking test of an absolute displacement sensor for suppression of high frequency dynamics

Takaaki Uemoto, Takashi Kai, Yukinori Nakamura, Shinji Wakui

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

In the field of vibration control, accelerometers are widely used as feedback sensors. However, it is desirable to use a velocity sensor or a displacement sensor without integral operators. Effects of damping and a skyhook spring are obtained by velocity and displacement feedback, respectively. Therefore, an absolute displacement sensor has proposed to be utilized as feedback sensors of semiconductor exposure apparatuses. The proposed displacement sensor has the same mechanical structured having a detector and pendulum as a commercial velocity sensor. In previous works, the proposed sensor is applied as feedback and feedforward sensors. However, detection bandwidth is limited due to mechanical resonances called high frequency dynamics. In this paper, causes of the resonances are identified and we carry out to suppress the resonances. At first, control structure and operating principle of the proposed sensor are described. Next, we carry out experimental modal analysis and suppress the resonances by using viscoelastic materials. Finally, we try addition of mass damper in consideration of vibration mode and suppress the same resonances, which are appeared in shaking test.

Original languageEnglish
Title of host publication2013 IEEE International Conference on Mechatronics, ICM 2013
Pages150-155
Number of pages6
DOIs
Publication statusPublished - 2013
Externally publishedYes
Event2013 IEEE International Conference on Mechatronics, ICM 2013 - Vicenza, Italy
Duration: Feb 27 2013Mar 1 2013

Other

Other2013 IEEE International Conference on Mechatronics, ICM 2013
CountryItaly
CityVicenza
Period2/27/133/1/13

Fingerprint

Modal analysis
Sensors
Feedback
Vibration control
Pendulums
Accelerometers
Vibrations (mechanical)
Damping
Semiconductor materials
Detectors
Bandwidth

ASJC Scopus subject areas

  • Electrical and Electronic Engineering
  • Mechanical Engineering

Cite this

Uemoto, T., Kai, T., Nakamura, Y., & Wakui, S. (2013). Experimental modal analysis and shaking test of an absolute displacement sensor for suppression of high frequency dynamics. In 2013 IEEE International Conference on Mechatronics, ICM 2013 (pp. 150-155). [6518527] https://doi.org/10.1109/ICMECH.2013.6518527

Experimental modal analysis and shaking test of an absolute displacement sensor for suppression of high frequency dynamics. / Uemoto, Takaaki; Kai, Takashi; Nakamura, Yukinori; Wakui, Shinji.

2013 IEEE International Conference on Mechatronics, ICM 2013. 2013. p. 150-155 6518527.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Uemoto, T, Kai, T, Nakamura, Y & Wakui, S 2013, Experimental modal analysis and shaking test of an absolute displacement sensor for suppression of high frequency dynamics. in 2013 IEEE International Conference on Mechatronics, ICM 2013., 6518527, pp. 150-155, 2013 IEEE International Conference on Mechatronics, ICM 2013, Vicenza, Italy, 2/27/13. https://doi.org/10.1109/ICMECH.2013.6518527
Uemoto T, Kai T, Nakamura Y, Wakui S. Experimental modal analysis and shaking test of an absolute displacement sensor for suppression of high frequency dynamics. In 2013 IEEE International Conference on Mechatronics, ICM 2013. 2013. p. 150-155. 6518527 https://doi.org/10.1109/ICMECH.2013.6518527
Uemoto, Takaaki ; Kai, Takashi ; Nakamura, Yukinori ; Wakui, Shinji. / Experimental modal analysis and shaking test of an absolute displacement sensor for suppression of high frequency dynamics. 2013 IEEE International Conference on Mechatronics, ICM 2013. 2013. pp. 150-155
@inproceedings{25d2fb7f82ed4cafb65518d1591cb4e6,
title = "Experimental modal analysis and shaking test of an absolute displacement sensor for suppression of high frequency dynamics",
abstract = "In the field of vibration control, accelerometers are widely used as feedback sensors. However, it is desirable to use a velocity sensor or a displacement sensor without integral operators. Effects of damping and a skyhook spring are obtained by velocity and displacement feedback, respectively. Therefore, an absolute displacement sensor has proposed to be utilized as feedback sensors of semiconductor exposure apparatuses. The proposed displacement sensor has the same mechanical structured having a detector and pendulum as a commercial velocity sensor. In previous works, the proposed sensor is applied as feedback and feedforward sensors. However, detection bandwidth is limited due to mechanical resonances called high frequency dynamics. In this paper, causes of the resonances are identified and we carry out to suppress the resonances. At first, control structure and operating principle of the proposed sensor are described. Next, we carry out experimental modal analysis and suppress the resonances by using viscoelastic materials. Finally, we try addition of mass damper in consideration of vibration mode and suppress the same resonances, which are appeared in shaking test.",
author = "Takaaki Uemoto and Takashi Kai and Yukinori Nakamura and Shinji Wakui",
year = "2013",
doi = "10.1109/ICMECH.2013.6518527",
language = "English",
isbn = "9781467313889",
pages = "150--155",
booktitle = "2013 IEEE International Conference on Mechatronics, ICM 2013",

}

TY - GEN

T1 - Experimental modal analysis and shaking test of an absolute displacement sensor for suppression of high frequency dynamics

AU - Uemoto, Takaaki

AU - Kai, Takashi

AU - Nakamura, Yukinori

AU - Wakui, Shinji

PY - 2013

Y1 - 2013

N2 - In the field of vibration control, accelerometers are widely used as feedback sensors. However, it is desirable to use a velocity sensor or a displacement sensor without integral operators. Effects of damping and a skyhook spring are obtained by velocity and displacement feedback, respectively. Therefore, an absolute displacement sensor has proposed to be utilized as feedback sensors of semiconductor exposure apparatuses. The proposed displacement sensor has the same mechanical structured having a detector and pendulum as a commercial velocity sensor. In previous works, the proposed sensor is applied as feedback and feedforward sensors. However, detection bandwidth is limited due to mechanical resonances called high frequency dynamics. In this paper, causes of the resonances are identified and we carry out to suppress the resonances. At first, control structure and operating principle of the proposed sensor are described. Next, we carry out experimental modal analysis and suppress the resonances by using viscoelastic materials. Finally, we try addition of mass damper in consideration of vibration mode and suppress the same resonances, which are appeared in shaking test.

AB - In the field of vibration control, accelerometers are widely used as feedback sensors. However, it is desirable to use a velocity sensor or a displacement sensor without integral operators. Effects of damping and a skyhook spring are obtained by velocity and displacement feedback, respectively. Therefore, an absolute displacement sensor has proposed to be utilized as feedback sensors of semiconductor exposure apparatuses. The proposed displacement sensor has the same mechanical structured having a detector and pendulum as a commercial velocity sensor. In previous works, the proposed sensor is applied as feedback and feedforward sensors. However, detection bandwidth is limited due to mechanical resonances called high frequency dynamics. In this paper, causes of the resonances are identified and we carry out to suppress the resonances. At first, control structure and operating principle of the proposed sensor are described. Next, we carry out experimental modal analysis and suppress the resonances by using viscoelastic materials. Finally, we try addition of mass damper in consideration of vibration mode and suppress the same resonances, which are appeared in shaking test.

UR - http://www.scopus.com/inward/record.url?scp=84879345371&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84879345371&partnerID=8YFLogxK

U2 - 10.1109/ICMECH.2013.6518527

DO - 10.1109/ICMECH.2013.6518527

M3 - Conference contribution

SN - 9781467313889

SP - 150

EP - 155

BT - 2013 IEEE International Conference on Mechatronics, ICM 2013

ER -