Evaluation of creep properties of reduced activation ferritic steels by small punch creep test

Toshiya Nakata, Shin Ichi Komazaki, Yutaka Kohno, Kiyoyuki Shiba, Akira Kohyama, Toshiyuki Hashida

Research output: Contribution to journalArticle

5 Citations (Scopus)

Abstract

Reduced activation ferritic/martensitic steels (RAFs) are leading candidates for structural materials of fusion reactors. It is essential to understand an influence of irradiation on their mechanical properties such as impact toughness and creep properties to put them in practical use. However, since there are severe limitations on specimen capacity at material irradiation testing facilities, it is required to use miniaturized specimens. In this paper, creep properties of the RAFs, JLF-1 and F82H were evaluated by recently developed small punch (SP) creep test. The test results were correlated with those of standard uniaxial creep test in terms of the conversion of applied load to stress. Experimental results revealed that the relationship between minimum creep deflection rate and rupture life measured by the SP creep test followed the Monkman-Grant's low as well as those of uniaxial test. The rupture lives of uniaxial and SP tests were arranged against the applied stress and load using Larson-Miller parameter, respectively. Then, the ratio of load (F, N) to stress (σ, MPa) was calculated so that both curves were overlapped each other. As a result, the correlation was estimated to be F= 2.4σ and was consistent with that reported in the conventional CrMoV casting steel.

Original languageEnglish
Pages (from-to)130-133
Number of pages4
JournalNippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals
Volume70
Issue number2
DOIs
Publication statusPublished - Feb 1 2006

Keywords

  • Creep
  • Fusion reactor structural materials
  • Miniaturized specimens
  • Monkman-Grant correlation
  • Reduced activation ferritic/martensitic steels
  • Small punch creep

ASJC Scopus subject areas

  • Condensed Matter Physics
  • Mechanics of Materials
  • Metals and Alloys
  • Materials Chemistry

Fingerprint Dive into the research topics of 'Evaluation of creep properties of reduced activation ferritic steels by small punch creep test'. Together they form a unique fingerprint.

  • Cite this