Evaluation of characteristics of composite electromagnetic wave absorbers

Kenji Sakai, Kiyohiro Hiraki, Hiroki Kusunoki, Takatoshi Kondo, Shinzo Yoshikado

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

It is found through simulation that composite electromagnetic wave absorbers made of Ni-Zn ferrite and SiO2 particles, which are isolated in the continuous medium of Ni-Zn ferrite, show good absorption. In particular, absorbers show absorption in the frequency regions both below and above 1 GHz for the mixing ratio of SiO2 of 80 mol%. To simulate the complex permeability of the composite materials, we considered some arrangements of SiCh in the Ni-Zn ferrite medium. Measured values of complex permeability are close to simulated ones above 1 GHz.

Original languageEnglish
Pages (from-to)193-196
Number of pages4
JournalKey Engineering Materials
Volume320
DOIs
Publication statusPublished - 2006
Externally publishedYes

Fingerprint

Electromagnetic waves
Ferrite
Composite materials

Keywords

  • Complex permeability
  • Composite electromagnetic wave absorber
  • Isolated model
  • Mechanical milling method
  • Ni-/n ferrite
  • SiO

ASJC Scopus subject areas

  • Ceramics and Composites
  • Chemical Engineering (miscellaneous)

Cite this

Evaluation of characteristics of composite electromagnetic wave absorbers. / Sakai, Kenji; Hiraki, Kiyohiro; Kusunoki, Hiroki; Kondo, Takatoshi; Yoshikado, Shinzo.

In: Key Engineering Materials, Vol. 320, 2006, p. 193-196.

Research output: Contribution to journalArticle

Sakai, Kenji ; Hiraki, Kiyohiro ; Kusunoki, Hiroki ; Kondo, Takatoshi ; Yoshikado, Shinzo. / Evaluation of characteristics of composite electromagnetic wave absorbers. In: Key Engineering Materials. 2006 ; Vol. 320. pp. 193-196.
@article{ff6a8133ce65456ca3e971c82ff6d46f,
title = "Evaluation of characteristics of composite electromagnetic wave absorbers",
abstract = "It is found through simulation that composite electromagnetic wave absorbers made of Ni-Zn ferrite and SiO2 particles, which are isolated in the continuous medium of Ni-Zn ferrite, show good absorption. In particular, absorbers show absorption in the frequency regions both below and above 1 GHz for the mixing ratio of SiO2 of 80 mol{\%}. To simulate the complex permeability of the composite materials, we considered some arrangements of SiCh in the Ni-Zn ferrite medium. Measured values of complex permeability are close to simulated ones above 1 GHz.",
keywords = "Complex permeability, Composite electromagnetic wave absorber, Isolated model, Mechanical milling method, Ni-/n ferrite, SiO",
author = "Kenji Sakai and Kiyohiro Hiraki and Hiroki Kusunoki and Takatoshi Kondo and Shinzo Yoshikado",
year = "2006",
doi = "10.4028/0-87849-411-1.193",
language = "English",
volume = "320",
pages = "193--196",
journal = "Key Engineering Materials",
issn = "1013-9826",
publisher = "Trans Tech Publications",

}

TY - JOUR

T1 - Evaluation of characteristics of composite electromagnetic wave absorbers

AU - Sakai, Kenji

AU - Hiraki, Kiyohiro

AU - Kusunoki, Hiroki

AU - Kondo, Takatoshi

AU - Yoshikado, Shinzo

PY - 2006

Y1 - 2006

N2 - It is found through simulation that composite electromagnetic wave absorbers made of Ni-Zn ferrite and SiO2 particles, which are isolated in the continuous medium of Ni-Zn ferrite, show good absorption. In particular, absorbers show absorption in the frequency regions both below and above 1 GHz for the mixing ratio of SiO2 of 80 mol%. To simulate the complex permeability of the composite materials, we considered some arrangements of SiCh in the Ni-Zn ferrite medium. Measured values of complex permeability are close to simulated ones above 1 GHz.

AB - It is found through simulation that composite electromagnetic wave absorbers made of Ni-Zn ferrite and SiO2 particles, which are isolated in the continuous medium of Ni-Zn ferrite, show good absorption. In particular, absorbers show absorption in the frequency regions both below and above 1 GHz for the mixing ratio of SiO2 of 80 mol%. To simulate the complex permeability of the composite materials, we considered some arrangements of SiCh in the Ni-Zn ferrite medium. Measured values of complex permeability are close to simulated ones above 1 GHz.

KW - Complex permeability

KW - Composite electromagnetic wave absorber

KW - Isolated model

KW - Mechanical milling method

KW - Ni-/n ferrite

KW - SiO

UR - http://www.scopus.com/inward/record.url?scp=33748461587&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=33748461587&partnerID=8YFLogxK

U2 - 10.4028/0-87849-411-1.193

DO - 10.4028/0-87849-411-1.193

M3 - Article

AN - SCOPUS:33748461587

VL - 320

SP - 193

EP - 196

JO - Key Engineering Materials

JF - Key Engineering Materials

SN - 1013-9826

ER -