Enhancement of apatite-forming ability of parallely aligned Ti-substrates with optimum gaps by autoclaving

Yoko Nakao, Atsushi Sugino, Kanji Tsuru, Keita Uetsuki, Yuki Shirosaki, Satoshi Hayakawa, Akiyoshi Osaka

Research output: Contribution to journalArticle

17 Citations (Scopus)

Abstract

Pure titanium pieces were air-oxidized and autoclaved at 121°C for 20min before aligning various pairs of specimens in the GRAPEμ set-up, i.e., two pieces of rectangular substrates were aligned parallel to each other with optimum gap width (spatial design). Then, they were soaked in Kokubo's simulated body fluid (SBF) for 7 days to clarify how the autoclaving is to affect the in vitro apatite-forming ability on the substrates under the specific spatial design. Autoclaved specimens deposited a larger number of apatite particles, and showed stronger apatite X-ray diffraction than the specimen only heated in air. X-ray photoelectron spectroscopy (XPS) analysis indicated that the amount of chemically adsorbed OH and TiOH groups on the thermally oxidized titanium specimens increased by autoclaving. These results lead to the conclusion that the increase of TiOH groups and OH(s) and H2O groups on the surface enhanced the in vitro apatite-forming ability on spatial design.

Original languageEnglish
Pages (from-to)483-486
Number of pages4
JournalJournal of the Ceramic Society of Japan
Volume118
Issue number1378
DOIs
Publication statusPublished - Jun 2010

Keywords

  • Autoclave
  • Bone-like hydroxyapatite
  • Spatial design
  • Titanium oxide
  • Titanium substrates

ASJC Scopus subject areas

  • Ceramics and Composites
  • Chemistry(all)
  • Condensed Matter Physics
  • Materials Chemistry

Fingerprint Dive into the research topics of 'Enhancement of apatite-forming ability of parallely aligned Ti-substrates with optimum gaps by autoclaving'. Together they form a unique fingerprint.

  • Cite this