Elasto-plasticity behavior of IF steel sheet with planar anisotropy and its macro-meso modeling

Kohshiroh Kitayama, Takumi Kobayashi, Takeshi Uemori, Fusahito Yoshida

Research output: Contribution to journalArticle

5 Citations (Scopus)

Abstract

Elasto-plasticity behavior of an IF steel sheet was investigated by performing uniaxial tension tests in three directions (0°, 45° and 90°to the rolling direction of the sheet), in-plane cyclic tension compression test and bi-axial tension test. The sheet has strong planar anisotropy (r 0 = 2.15, r 45 = 2.12 and r 90 = 2.89) but very weak flow stress directionality. Equi-biaxial flow stress is as large as 1.23 times of the uniaxial flow stress. These elasto-plasticity deformation characteristics, as well as the Bauschinger effect and cyclic hardening behavior, are well described by a macro-plasticity model (Yoshida-Uemori model incorporating with the 4th-order anisotropic yield function). Further, the simulation of elasto-plasticity stress strain responses of the sheet were conducted by two types of crystal plasticity models, i.e., Taylor hypothesis based model and CPFEM, using the crystallographic orientation distribution data measured by neutron diffraction method. The models capture most of the above-mentioned deformation characteristics qualitatively, but the predicted anisotropy and the Bauschinger effect are weaker than those of the real material. The CPFEM gives more realistic results than the Taylor model.

Original languageEnglish
Pages (from-to)735-742
Number of pages8
JournalISIJ International
Volume52
Issue number4
DOIs
Publication statusPublished - 2012
Externally publishedYes

Fingerprint

Steel sheet
Plasticity
Macros
Anisotropy
Plastic flow
Neutron diffraction
Hardening
Crystals

Keywords

  • Bauschinger effect
  • Crystal plasticity
  • IF steel sheet
  • Macro-meso modeling
  • Plastic anisotropy

ASJC Scopus subject areas

  • Mechanical Engineering
  • Mechanics of Materials
  • Materials Chemistry
  • Metals and Alloys

Cite this

Elasto-plasticity behavior of IF steel sheet with planar anisotropy and its macro-meso modeling. / Kitayama, Kohshiroh; Kobayashi, Takumi; Uemori, Takeshi; Yoshida, Fusahito.

In: ISIJ International, Vol. 52, No. 4, 2012, p. 735-742.

Research output: Contribution to journalArticle

Kitayama, Kohshiroh ; Kobayashi, Takumi ; Uemori, Takeshi ; Yoshida, Fusahito. / Elasto-plasticity behavior of IF steel sheet with planar anisotropy and its macro-meso modeling. In: ISIJ International. 2012 ; Vol. 52, No. 4. pp. 735-742.
@article{85a3dec007234e5fb2eaf595bd773149,
title = "Elasto-plasticity behavior of IF steel sheet with planar anisotropy and its macro-meso modeling",
abstract = "Elasto-plasticity behavior of an IF steel sheet was investigated by performing uniaxial tension tests in three directions (0°, 45° and 90°to the rolling direction of the sheet), in-plane cyclic tension compression test and bi-axial tension test. The sheet has strong planar anisotropy (r 0 = 2.15, r 45 = 2.12 and r 90 = 2.89) but very weak flow stress directionality. Equi-biaxial flow stress is as large as 1.23 times of the uniaxial flow stress. These elasto-plasticity deformation characteristics, as well as the Bauschinger effect and cyclic hardening behavior, are well described by a macro-plasticity model (Yoshida-Uemori model incorporating with the 4th-order anisotropic yield function). Further, the simulation of elasto-plasticity stress strain responses of the sheet were conducted by two types of crystal plasticity models, i.e., Taylor hypothesis based model and CPFEM, using the crystallographic orientation distribution data measured by neutron diffraction method. The models capture most of the above-mentioned deformation characteristics qualitatively, but the predicted anisotropy and the Bauschinger effect are weaker than those of the real material. The CPFEM gives more realistic results than the Taylor model.",
keywords = "Bauschinger effect, Crystal plasticity, IF steel sheet, Macro-meso modeling, Plastic anisotropy",
author = "Kohshiroh Kitayama and Takumi Kobayashi and Takeshi Uemori and Fusahito Yoshida",
year = "2012",
doi = "10.2355/isijinternational.52.735",
language = "English",
volume = "52",
pages = "735--742",
journal = "ISIJ International",
issn = "0915-1559",
publisher = "Iron and Steel Institute of Japan",
number = "4",

}

TY - JOUR

T1 - Elasto-plasticity behavior of IF steel sheet with planar anisotropy and its macro-meso modeling

AU - Kitayama, Kohshiroh

AU - Kobayashi, Takumi

AU - Uemori, Takeshi

AU - Yoshida, Fusahito

PY - 2012

Y1 - 2012

N2 - Elasto-plasticity behavior of an IF steel sheet was investigated by performing uniaxial tension tests in three directions (0°, 45° and 90°to the rolling direction of the sheet), in-plane cyclic tension compression test and bi-axial tension test. The sheet has strong planar anisotropy (r 0 = 2.15, r 45 = 2.12 and r 90 = 2.89) but very weak flow stress directionality. Equi-biaxial flow stress is as large as 1.23 times of the uniaxial flow stress. These elasto-plasticity deformation characteristics, as well as the Bauschinger effect and cyclic hardening behavior, are well described by a macro-plasticity model (Yoshida-Uemori model incorporating with the 4th-order anisotropic yield function). Further, the simulation of elasto-plasticity stress strain responses of the sheet were conducted by two types of crystal plasticity models, i.e., Taylor hypothesis based model and CPFEM, using the crystallographic orientation distribution data measured by neutron diffraction method. The models capture most of the above-mentioned deformation characteristics qualitatively, but the predicted anisotropy and the Bauschinger effect are weaker than those of the real material. The CPFEM gives more realistic results than the Taylor model.

AB - Elasto-plasticity behavior of an IF steel sheet was investigated by performing uniaxial tension tests in three directions (0°, 45° and 90°to the rolling direction of the sheet), in-plane cyclic tension compression test and bi-axial tension test. The sheet has strong planar anisotropy (r 0 = 2.15, r 45 = 2.12 and r 90 = 2.89) but very weak flow stress directionality. Equi-biaxial flow stress is as large as 1.23 times of the uniaxial flow stress. These elasto-plasticity deformation characteristics, as well as the Bauschinger effect and cyclic hardening behavior, are well described by a macro-plasticity model (Yoshida-Uemori model incorporating with the 4th-order anisotropic yield function). Further, the simulation of elasto-plasticity stress strain responses of the sheet were conducted by two types of crystal plasticity models, i.e., Taylor hypothesis based model and CPFEM, using the crystallographic orientation distribution data measured by neutron diffraction method. The models capture most of the above-mentioned deformation characteristics qualitatively, but the predicted anisotropy and the Bauschinger effect are weaker than those of the real material. The CPFEM gives more realistic results than the Taylor model.

KW - Bauschinger effect

KW - Crystal plasticity

KW - IF steel sheet

KW - Macro-meso modeling

KW - Plastic anisotropy

UR - http://www.scopus.com/inward/record.url?scp=84860166515&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84860166515&partnerID=8YFLogxK

U2 - 10.2355/isijinternational.52.735

DO - 10.2355/isijinternational.52.735

M3 - Article

AN - SCOPUS:84860166515

VL - 52

SP - 735

EP - 742

JO - ISIJ International

JF - ISIJ International

SN - 0915-1559

IS - 4

ER -