Effects of Geometry and Dimension of Specimen and Rig on Small Punch Creep Property

T. Nakata, S. Komazaki, Y. Kohno, H. Tanigawa

Research output: Contribution to journalArticle

6 Citations (Scopus)

Abstract

The purpose of this study was to examine the effects of the geometries and dimensions of the rig and specimen of a small punch (SP) test on the determined creep property. The SP creep property of a specimen was evaluated using finite element analysis by varying the specimen thickness and diameter, diameter of the spherical and hemispherical indentation punches, inner diameter of the lower die, and dimensions of the chamfer of the lower die. We observed that the rupture time decreased with decreasing specimen thickness and punch diameter and with increasing chamfer size and inner diameter of the lower die. Under similar analytical conditions of static average equivalent stress in steady state, the SP creep curves reasonably agreed even in the case where the specimens or rigs have different geometries, which implied the possibility of direct comparison of the test results obtained from specimens and rigs with different dimensions and geometries.

Original languageEnglish
Pages (from-to)487-494
Number of pages8
JournalExperimental Mechanics
Volume57
Issue number3
DOIs
Publication statusPublished - Mar 1 2017

Fingerprint

Creep
Geometry
Indentation
Finite element method

Keywords

  • F82H
  • Finite element method
  • Small punch creep test
  • SP creep test
  • SPC
  • SSTT

ASJC Scopus subject areas

  • Aerospace Engineering
  • Mechanics of Materials
  • Mechanical Engineering

Cite this

Effects of Geometry and Dimension of Specimen and Rig on Small Punch Creep Property. / Nakata, T.; Komazaki, S.; Kohno, Y.; Tanigawa, H.

In: Experimental Mechanics, Vol. 57, No. 3, 01.03.2017, p. 487-494.

Research output: Contribution to journalArticle

Nakata, T. ; Komazaki, S. ; Kohno, Y. ; Tanigawa, H. / Effects of Geometry and Dimension of Specimen and Rig on Small Punch Creep Property. In: Experimental Mechanics. 2017 ; Vol. 57, No. 3. pp. 487-494.
@article{71993774e4394c06b5234185894818ca,
title = "Effects of Geometry and Dimension of Specimen and Rig on Small Punch Creep Property",
abstract = "The purpose of this study was to examine the effects of the geometries and dimensions of the rig and specimen of a small punch (SP) test on the determined creep property. The SP creep property of a specimen was evaluated using finite element analysis by varying the specimen thickness and diameter, diameter of the spherical and hemispherical indentation punches, inner diameter of the lower die, and dimensions of the chamfer of the lower die. We observed that the rupture time decreased with decreasing specimen thickness and punch diameter and with increasing chamfer size and inner diameter of the lower die. Under similar analytical conditions of static average equivalent stress in steady state, the SP creep curves reasonably agreed even in the case where the specimens or rigs have different geometries, which implied the possibility of direct comparison of the test results obtained from specimens and rigs with different dimensions and geometries.",
keywords = "F82H, Finite element method, Small punch creep test, SP creep test, SPC, SSTT",
author = "T. Nakata and S. Komazaki and Y. Kohno and H. Tanigawa",
year = "2017",
month = "3",
day = "1",
doi = "10.1007/s11340-016-0250-2",
language = "English",
volume = "57",
pages = "487--494",
journal = "Experimental Mechanics",
issn = "0014-4851",
publisher = "Springer New York",
number = "3",

}

TY - JOUR

T1 - Effects of Geometry and Dimension of Specimen and Rig on Small Punch Creep Property

AU - Nakata, T.

AU - Komazaki, S.

AU - Kohno, Y.

AU - Tanigawa, H.

PY - 2017/3/1

Y1 - 2017/3/1

N2 - The purpose of this study was to examine the effects of the geometries and dimensions of the rig and specimen of a small punch (SP) test on the determined creep property. The SP creep property of a specimen was evaluated using finite element analysis by varying the specimen thickness and diameter, diameter of the spherical and hemispherical indentation punches, inner diameter of the lower die, and dimensions of the chamfer of the lower die. We observed that the rupture time decreased with decreasing specimen thickness and punch diameter and with increasing chamfer size and inner diameter of the lower die. Under similar analytical conditions of static average equivalent stress in steady state, the SP creep curves reasonably agreed even in the case where the specimens or rigs have different geometries, which implied the possibility of direct comparison of the test results obtained from specimens and rigs with different dimensions and geometries.

AB - The purpose of this study was to examine the effects of the geometries and dimensions of the rig and specimen of a small punch (SP) test on the determined creep property. The SP creep property of a specimen was evaluated using finite element analysis by varying the specimen thickness and diameter, diameter of the spherical and hemispherical indentation punches, inner diameter of the lower die, and dimensions of the chamfer of the lower die. We observed that the rupture time decreased with decreasing specimen thickness and punch diameter and with increasing chamfer size and inner diameter of the lower die. Under similar analytical conditions of static average equivalent stress in steady state, the SP creep curves reasonably agreed even in the case where the specimens or rigs have different geometries, which implied the possibility of direct comparison of the test results obtained from specimens and rigs with different dimensions and geometries.

KW - F82H

KW - Finite element method

KW - Small punch creep test

KW - SP creep test

KW - SPC

KW - SSTT

UR - http://www.scopus.com/inward/record.url?scp=85010737613&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85010737613&partnerID=8YFLogxK

U2 - 10.1007/s11340-016-0250-2

DO - 10.1007/s11340-016-0250-2

M3 - Article

AN - SCOPUS:85010737613

VL - 57

SP - 487

EP - 494

JO - Experimental Mechanics

JF - Experimental Mechanics

SN - 0014-4851

IS - 3

ER -