Effect of solute content on plasma nitriding behavior of Fe-Cr alloys

Wei Yan Lin, Shigetoshi Okada, Jun Takada, Hideyuki Kuwahara, Susumu Nishikawa, Toshihiko Hama

Research output: Contribution to journalArticle

Abstract

Fe-Cr alloys with 3.0 to 18.6wt%Cr were plasma-nitrided at 650°C for 16h in a mixed gas of N2:H2=1:3. A nitriding layer, which is so called "internal nitriding layer", was formed parallel to the specimen surface, but the formation of a surface nitriding layer of γ′-Fe4N was not observed. The Cr nitride formed in the nitriding layer was determined by XRD experiments to be CrN, not Cr2N. The hardness Hv of the nitriding layer increased as the Cr content increased. The hardness increase is due to the dispersion of fine CrN particles in α-Fe matrix. The thickness of the nitriding layer decreased linearly as the Cr content increased.

Original languageEnglish
Pages (from-to)331-335
Number of pages5
JournalFuntai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy
Volume43
Issue number3
Publication statusPublished - Mar 1996

    Fingerprint

Keywords

  • CrN
  • Dispersion-strengthening
  • Fe-Cr alloys
  • Hardness distribution
  • Internal nitriding
  • Plasma-nitriding

ASJC Scopus subject areas

  • Mechanical Engineering
  • Metals and Alloys

Cite this